B-Line Eaton series strut fiberglass channel and fittings, 12" Height, 28" Length, 1.62" Width, .450lbs, Fiberglass, Bracket, Polyester resin

It's fiberglass, with a polyester resin finish. That's the reason contractors reach for it instead of a steel strut fitting: no galvanic issues with dissimilar metals and no painted steel to touch up in wet or chemically aggressive areas like wastewater plants, wash-down rooms, or coastal exterior runs.

The BFP409-24 measures 12 inches in height, 28 inches in length/depth, and 1.62 inches in width. That 1.62 inch width is the standard fiberglass strut channel profile width, so it lines up with B-Line fiberglass channel runs rather than sitting proud of them.

It's a fiberglass bracket from the Eaton B-Line fiberglass strut channel and fittings line, sized at 1.62 inches wide to match that fiberglass channel profile. Use it with fiberglass channel. If your run is steel strut, order the steel fitting from the matching steel series instead, since mixing a resin fitting into a steel system gives up the corrosion benefit you were paying for.

Order it as Eaton B-Line BFP409-24. One configuration, no handing or finish options to specify, so the base number is the whole order.

What ships is the bracket itself, a fiberglass component finished in polyester resin. Channel nuts, bolts, and anchors are separate line items, so add the fastener hardware for your channel and your structural attachment when you build the order.