You may also like
B-Line Eaton series strut fittings and accessories, 1.62" Height, 3.25" Length, 1.62" Width, .34lbs, Steel, Two hole splice plate, Electro-plated
Model: BLN-B340ZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.25" Length, 1.62" Width, .34lbs, Steel, Two hole splice plate, Electro-plated
B-LINE
$2,355.14
B-Line Eaton series strut fittings and accessories, 1.62" Height, 4.62" Length, 1.62" Width, .50lbs, Steel, Two hole splice plate, Electro-plated zinc
Model: BLN-B528ZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 4.62" Length, 1.62" Width, .50lbs, Steel, Two hole splice plate, Electro-plated zinc
B-LINE
$7,906.40
B-Line Eaton series strut fittings and accessories, 1.62" Height, 4.87" Length, 1.62" Width, .50lbs, Steel, Three hole splice plate, Electro-plated zi
Model: BLN-B557ZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 4.87" Length, 1.62" Width, .50lbs, Steel, Three hole splice plate, Electro-plated zinc
B-LINE
$4,133.56
B-Line Eaton series strut fittings and accessories, 3.77" Height, 1.62" Length, 1.62" Width, .73lbs, Steel, Three hole cup support, Electro-plated zin
Model: BLN-B398-1ZN
Eaton B-Line series strut fittings and accessories, 3.77" Height, 1.62" Length, 1.62" Width, .73lbs, Steel, Three hole cup support, Electro-plated zinc
B-LINE
$7,954.63
B-Line Eaton series strut fittings and accessories, 3.25" Height, 3.5" Length, 1.62" Width, .73lbs, Steel, Four hole splice plate, Electro-plated zinc
Model: BLN-B504ZN
Eaton B-Line series strut fittings and accessories, 3.25" Height, 3.5" Length, 1.62" Width, .73lbs, Steel, Four hole splice plate, Electro-plated zinc
B-LINE
$6,382.60
Eaton B-Line series strut fittings and accessories, 1.62" Height, 9.13" Length, 1.62" Width, .96lbs, Steel, Five hole splice plate, Electro-plated zinc
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1.62 in
- Product Length Depth:
- 9.13 in
- Product Weight:
- .96 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Plates
- Product Type:
- Five hole splice plate
- Product Finish:
- Electro-plated
- Product Details:
- Five hole splice plate
- Product Material:
- Steel
- Product Length:
- 9.13 in
B-LINE B342ZN – Frequently Asked Questions
1) What is the B-Line B342ZN splice plate used for on a strut run?
The B342ZN is a five hole splice plate for joining two lengths of B-Line strut channel end to end. You bolt it across the joint using channel nuts or bolts through the five holes, so the run carries through instead of stopping at the end of a stick. It is a flat steel plate, 9.13 inches long by 1.62 inches wide by 1.62 inches in stated height, weighing .96 lb.
2) Will the B342ZN splice plate fit standard 1-5/8 inch strut channel?
Yes. At 1.62 inches wide it matches the 1-5/8 inch nominal face of standard strut channel, which is what this fitting is built for. It sits flat on the channel face and does not overhang the sides.
3) Is the zinc plated B342ZN suitable for outdoor or wet locations?
Electro-plated zinc on steel is an indoor, dry-location finish. It handles normal interior mechanical rooms, ceilings and equipment rooms fine, but for exterior runs, parking structures, roof-top support or washdown areas you want hot dip galvanized or stainless strut fittings instead.
4) Does the B-Line B342ZN come with bolts and channel nuts?
The B342ZN is supplied as the steel plate only. Order channel nuts and hex head bolts sized for your strut separately, five sets if you are filling every hole. A shorter plate or fewer fasteners can be used where the joint is not carrying much load, but the plate itself ships bare.
5) What is the exact part number to order this B-Line splice plate?
Order it as Eaton B-Line B342ZN. That is the manufacturer part number for the five hole, electro-plated zinc steel splice plate.
6) How much does the B342ZN splice plate weigh for load calculations on a hanger run?
Each plate weighs .96 lb. On a long trapeze or suspended run with several splices, count that into your dead load along with the strut and hardware.
How fast can I get the B-LINE B342ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B342ZN come with a warranty?
Absolutely. The B-LINE B342ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B342ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B342ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.