You may also like
Manufacturer Resources
Product Specs
- Cable Type:
- SOOW-J
- Contact Configuration:
- 2NO-2NC
- Contact Rating:
- 10A at 240 Vac, 1A at 250 Vdc
- Cord Length:
- 96 FT
- Enclosure Material:
- Die cast zinc
- Environmental Rating:
- NEMA 1, 3, 3S, 4, 4X, 6, 6P, 13, IP67, IP69K
- Maximum Ac Current:
- 10A
- Maximum Dc Current:
- 1A
- Operating Temperature:
- -31° to 175°F
- Series:
- E50
- Department:
- Electrical
- Product Length:
- 3.63 IN
- Product Height:
- 2.46 IN
- Product Width:
- 1.54 IN
B-LINE E50SB6P – Frequently Asked Questions
1) Can the B-Line E50SB6P limit switch body be used in a washdown or wet area?
Yes. The E50SB6P body carries NEMA 1, 3, 3S, 4, 4X, 6, 6P, 13 plus IP67 and IP69K ratings, so it handles hosedown, high pressure washdown and temporary submersion. The 4X rating covers corrosive environments, and the housing is die cast zinc.
2) How many contacts does the E50SB6P limit switch body have, and can it switch two separate circuits?
The E50SB6P is a 2NO-2NC body, so you get two normally open and two normally closed contacts. That lets you run one circuit for control and a second for signalling or interlock off the same actuation.
3) Will this B-Line limit switch body handle a 240V motor starter coil?
The E50SB6P contacts are rated 10A at 240 Vac and 1A at 250 Vdc. A standard starter coil at 240 Vac draws far less than 10A, so it's within rating. On DC control circuits keep the load at or under 1A.
4) Does the E50SB6P come with a cord already attached, or do I have to wire into a conduit fitting?
It comes prewired with 96 feet of SOOW-J cable, so there's no conduit entry to make up at the switch. Run the free end back to your panel and cut to length. SOOW-J is oil resistant and suited to wet locations, which matches the body's IP69K rating.
5) Do I get the operating head and lever arm with the E50SB6P, or just the switch body?
This is the switch body only, an E50 series component. The operating head and the lever, roller or plunger actuator are separate E50 series pieces you select for the application, so order the head style your machine guarding or conveyor position needs along with it.
6) How much space do I need to mount a B-Line E50 series limit switch body?
The E50SB6P body measures 3.63 x 2.46 x 1.54 inches (length, height, width). Allow clearance beyond that for the operating head and lever you pair with it, plus a bend radius for the attached cord.
7) Will this limit switch body work in a freezer or outdoors in winter?
Operating range on the E50SB6P is -31 to 175 degrees F, so cold storage and outdoor service are both inside spec, as are hot process areas up to 175F.
8) What is the exact part number for the B-Line E50 prewired limit switch body with 96 ft cord?
Order it as E50SB6P. That designation is the E50 series body with 2NO-2NC contacts and the 96 foot SOOW-J cord.
How fast can I get the B-LINE E50SB6P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE E50SB6P come with a warranty?
Absolutely. The B-LINE E50SB6P is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE E50SB6P?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE E50SB6P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.