Baldwin 85317 Gramercy Knurled Full Escutcheon Handleset Emergency Egress w/ L030 Lever

Handing matters on the keyed versions. The single cylinder handleset with lever and emergency egress comes as a left hand entry or a right hand entry, so you have to determine the swing before ordering. The dummy set with lever is also split LH and RH. Two versions skip handing entirely: the full dummy set minus lever and the single cylinder handleset minus lever, since there is no lever to orient.

On the 85317 the interior side uses a turn piece rather than a key, so someone inside retracts the deadbolt by hand and gets out without hunting for a key. It is an entry function set: keyed outside, thumbturn inside. That is not a commercial panic or fire exit device and it is not rated as one. For a code-driven egress opening in a commercial building you want a listed exit device, not residential entry trim.

Baldwin lists the 85317 as residential, and it is an Estate Series entry handleset built for a house front door. For a leased commercial entrance or a high-traffic multi-family opening, a commercial cylindrical lockset is the better call: the Falcon K101 K Series is a Grade 1 heavy duty unit, and the Hager 2525 is a Grade 2 commercial entry lock with a lever. Those are graded products; the Gramercy is trim-driven residential hardware.

Both. The 85317 uses an adjustable backset latch, so it covers the two standard residential bores, 2-3/8 and 2-3/4 inches, without ordering a specific latch. If you are replacing existing hardware on a pre-bored door you do not need to measure the backset first to place the order, though you still want to confirm the cross bore spacing matches a handleset with a separate deadbolt bore.

The Baldwin 85317 Gramercy starts at 1-3/4 inch door thickness, so a 1-3/8 inch door is below its range. Options that reach down to 1-3/8 inch include the Cal-Royal AG00 entrance lever, a Grade 2 with a 6-pin Schlage C keyway keyed different and a 2-3/8 inch backset, and the Cal-Royal AG05 Grade 2 storeroom lever with a deadlocking latchbolt. On the residential side, the Kwikset 200BRNL Breton passage lever is Grade 3 and covers 1-3/8 inch to 1-3/4 inch, though that one is passage function with no key.

The Baldwin 85317 Gramercy is a keyed entry handleset with an interior turn piece, so going keyless means a different product entirely. The Emtek Classic Keypad Leverset puts a code entry on a decorative brass lever. The Delaney LP250 is a Grade 2 electronic keypad leverlock. If you want mechanical pushbutton with no batteries, the Lockey 2835 single combination and 2835DC double combination keyless lever locks cover 1-3/16 inch to 2 inch doors, and the Lockey 1150 heavy duty keypad lever set covers 1-1/8 inch to 2 inch. Note the Lockey units listed are passage function, so they latch and release by code rather than providing a separate deadbolt like the Gramercy handleset does.

The Baldwin 85317 Gramercy is built for residential use, so for a commercial opening the answer is a graded cylindrical entry lock. The Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle and fits doors 1-3/8 inch to 2 inch. The Falcon B511CP6D is a Grade 2 medium duty cylindrical lever with entry/office function. For heavier traffic, the Dexter C1000 Series entry/office lever is Grade 1 with a clutching keyed lever, fitting 1-3/8 inch to 1-3/4 inch doors. All three are cylindrical locksets rather than an escutcheon handleset, so the door prep and the visible trim are entirely different from the Gramercy.

The Baldwin 85317 Gramercy is a residential Estate Series handleset, and heavy corridor traffic calls for a Grade 1 cylindrical lock. The Falcon K101 is Grade 1 heavy duty, fire rated, non-handed, and covers 1-3/8 inch to 2-1/4 inch doors, matching the Gramercy's 2-1/4 inch upper thickness limit. The Corbin Russwin CL3110 is Grade 1 vandal resistant and fire rated for 1-3/4 inch to 2 inch doors. Both are passage function, so for a keyed corridor opening you would pair them with the keyed function in the same series rather than substituting them one for one.

The 85317 Gramercy is entry function with an interior turn piece, which lets anyone inside unlock the door - the opposite of what a storeroom needs. For a storeroom opening where the outside lever stays locked at all times, the Cal-Royal AG05 is a Grade 2 storeroom lockset with a deadlocking latchbolt for 1-3/8 inch to 1-3/4 inch doors, and the Hager 2580 with Withnell lever is Grade 2 storeroom function for 1-3/8 inch to 2 inch doors. Both are keyed cylindrical levers, so the door prep is a standard cylindrical bore rather than the handleset prep the Gramercy uses.

They both use the word escutcheon, but they are different classes of hardware. The Baldwin 85317 Gramercy is an Estate Series residential entry handleset with a keyed cylinder and an interior turn piece, fitting 1-3/4 inch to 2-1/4 inch doors. The Imperial USA ED-EL500HD is heavy duty escutcheon lever trim in the ED-500 Series with entry function, meaning it is exit device trim - it mounts to a panic device on the outside of the door and has no latch or bolt of its own. Ordering it for a residential front door leaves you with trim and no lock.

Projection on the 85317 is 2-23/32 inches. That is the number that matters if you have a storm door, a screen door, or a sidelight return close to the opening, since the escutcheon and lever have to swing clear. Measure the gap between your door face and the storm door before committing.

Yes, and in two forms. The full dummy set with lever comes handed LH or RH for an inactive leaf on a pair of doors or a fixed panel. There is also a full dummy set minus lever if you are matching a lever you already have or ordering the lever separately. Neither latches or locks; they are surface-mounted trim for looks and pull only.

Standard pre-bored wood and metal doors take the 85317 directly, and the adjustable backset means the latch suits either common bore location. It is a full escutcheon handleset, so the trim plate covers the door face top to bottom, which also helps hide wear or old prep marks left by whatever came off the door.

The 85317 Gramercy is key-outside, thumbturn-inside, so there is no code entry on it. For keyless, the Lockey 2835 mechanical pushbutton lever handles 1-3/16 to 2 inch doors and the Lockey 1150 heavy duty keypad lever set covers 1-1/8 to 2 inches with an adjustable backset. Emtek also does a Classic Keypad Leverset if you want the look closer to decorative residential trim. None of those are handlesets with a full escutcheon plate, so the door face prep and appearance will change.

Yes. Two of the configurations come minus lever: a single cylinder handleset minus lever, and a full dummy set minus lever. Those let you pair the Gramercy escutcheon with a lever you specify separately. Note the minus-lever versions are not sold handed, since the handing on this set comes from the lever.

Yes. The Baldwin 85317 Gramercy is a full escutcheon handleset with a 2-23/32 inch projection, which is a lot of trim for a side or garage-to-house door. The Callan Artino is a Grade 3 entrance leverset, and the Callan Bennett is a Grade 3 entrance leverset supplied as a lever and deadbolt combo, which gets you the keyed lever plus deadbolt without the tall escutcheon plate. The Cal-Royal AUS00 is a Grade 3 entrance/office lever with a solid brass forged body covering 1-3/8 inch to 1-3/4 inch doors. Each of these is a rose-trim lever rather than a handleset, so they will not cover the bore pattern a handleset leaves behind.

Both are non-operating trim, but they are not the same part. The Baldwin 85317 Gramercy is offered as a full dummy set with the lever and as a full dummy set minus the lever, which means the dummy carries the full Gramercy escutcheon face. The Emtek Arts and Crafts and Hammered dummy leversets, and the Emtek Classic Cortina dummy, are supplied as dummy pairs on rose trim. If you are matching an existing Gramercy escutcheon on an inactive door of a pair, the Emtek dummies will not visually match; if you want a plain lever on both faces of a closet or pantry door, they will.

No. The Baldwin 85317 Gramercy is entry function with an interior turn piece, meaning it locks. Passage levers such as the Bravura Atlanta, Orlando, and Tampa, all Grade 2 passage function, or the Callan Asheville Grade 3 passage lever, have no locking mechanism at all - they only latch. They are the correct choice for halls and closets and the wrong choice for an exterior opening. If you like the passage-lever look but need the door to lock, look to an entrance-function lever such as the Hager 2525 Grade 2 entry lock instead.

The Gramercy 85317 is ordered by hand - the emergency egress entry function and the dummy-with-lever function each come in a left hand and a right hand version. If handing is the problem, non-handed cylindrical levers avoid it: the Falcon B101 is a Grade 2 cylindrical passage lever with a non-handed design, and the Falcon K101 is a Grade 1 heavy duty passage lock with non-handed levers. The Arrow GL01 Sierra lever is Grade 2 passage function for 1-3/4 inch to 2 inch doors. All are passage function and rose-trim locks, so they solve stocking, not a keyed decorative entry.

The 85317 Gramercy is an entry-function handleset and is not a privacy lock, so interior bed and bath doors need a separate product. The Kwikset 300BRNL Breton privacy lever is Grade 3 and covers 1-3/8 inch to 1-3/4 inch doors. The Arrow MK02-TA is a privacy, bed and bath function lock with a Tudor knob, non-keyed, and is fire rated for 1-3/4 inch to 2 inch doors. The Hager 2540 with Withnell lever is a Grade 2 option covering 1-3/8 inch to 2 inch. These use a thumbturn-and-emergency-release rather than a key, which is what an interior door needs.

Solid forged brass body on the Gramercy handleset, with the deadbolt supplied with a high grade steel strike. Forged brass is what separates the Estate line from cast or plated zinc trim, and it is why the finishes are plated onto brass rather than sprayed over pot metal.

Fourteen named finishes, from Polished Brass PVD, Satin Brass PVD, Non-Lacquered Brass, Vintage Brass, Satin Brass Black and Satin Brass Brown through Polished Nickel PVD, Satin Nickel, Graphite Nickel, Polished Chrome, Oil Rubbed Bronze, Distressed Oil Rubbed Bronze, Venetian Bronze and Satin Black, plus ten M-coded options. The PVD finishes such as Satin Nickel are plated over solid brass, so if you are matching other Baldwin Estate trim on the same elevation, order by the finish number rather than the name.

The Gramercy 85317 dummy versions are decorative brass trim on a residential escutcheon. In a commercial standardization, the dummy trim usually comes from the same series as the working locks: the BEST 9K Series 1DT single dummy trim is Grade 1 heavy duty and non-keyed, and the BEST 7KC Series single dummy trim is Grade 2 medium duty. The Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever in the 5400 Series, and the Callan Bentley is a Grade 2 dummy lever. Picking the dummy from the same series as your keyed locks keeps the lever profile identical down the corridor.

The Gramercy 85317 is finished in a long list including 102 Oil Rubbed Bronze, 056 Satin Nickel, 044 Satin Brass PVD, 190 Satin Black, and 260 Polished Chrome. For interior doors you want to tone with it, the Callan Asheville Grade 3 passage leverset is offered in a satin nickel finish, and the Bravura Miramar with round trim passage leverset comes in US4 satin brass, Grade 2. Neither is a Baldwin finish and PVD plating will not be an exact visual match across brands, so pull a sample before committing a whole floor.