Baldwin 85352 Cody 3/4 Escutcheon Handleset Emergency Egress w/ 5024 Oval Knob or 5452V Beavertail Lever

Yes. The Cody 85352 handleset covers doors from 1-3/8 inches up to 2 inches thick, so a thick 2 inch entry slab is within range without any special kit. Standard 1-3/4 inch commercial and residential entry doors sit right in the middle of that range.

The lever versions are handed and the knob versions are not. Order the RH Entry or LH Entr version for the keyed lever handleset, and RH Dummy or LH Dummy for the dummy lever. Both interior knob versions (single cylinder and full dummy) are non-handed. Stand outside the door: if the hinges are on your right, it is a right hand door.

The single cylinder versions are working keyed entry locks with a key outside and a turn piece inside. The full dummy versions are surface mounted trim only, no latch, no cylinder, no turn piece. Use a dummy on an inactive leaf of a double door or a fixed panel where you only need matching trim and a pull. Both are offered with either the 5024 oval knob or the beavertail lever inside.

Different class of product. The Schlage Residential F60 Addison with Accent lever is a Grade 2 keyed entrance handleset for 1-3/8 to 1-3/4 inch doors, and the Kwikset 687 Amador is Grade 3 and sold exterior-trim only for 1-3/4 inch doors. The Baldwin Cody 85352 is a solid brass escutcheon handleset with a wider 1-3/8 to 2 inch door thickness range and an interior turn piece, offered in fourteen finishes. If your door is 2 inches thick, the Schlage and Kwikset options are out on thickness alone.

The Baldwin 85352 Cody is a mechanical entry lock with a keyed single cylinder exterior and an interior turn piece, so it has no electronic credential. For a keypad opening, the Kwikset 815SCEHFL San Clemente handleset pairs a Halifax lever interior with a contemporary SmartCode keypad electronic deadbolt on a 1-3/4 inch door. The Yale Assure BYRD226NRRX is a standalone touchscreen deadbolt with the Ridgefield handleset, and the BYRD226CBARX adds Wi-Fi and Bluetooth, both for 1-3/4 inch to 2-1/4 inch doors.

The Baldwin 85352 Cody handleset covers doors from 1-3/8 inch minimum up to 2 inch maximum. Two handlesets match that same range exactly: the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob and the Deltana 810871 Montego handleset, both rated 1-3/8 inch to 2 inch. The Weslock 2810 is a single cylinder function, which lines up with the Cody's single cylinder handleset configurations, while the Cody also offers an interior turn piece for locking.

The Baldwin 85352 Cody itself is offered in full dummy set with interior knob and full dummy set with lever in both left hand and right hand, so you can match the active opening with the same escutcheon. If you are specifying a different brand for the inactive leaf, the Emtek 3002 Memphis, 3004 Hamilton, 3005 Melrose and 3006 Manhattan are all brass mortise entrance handlesets in dummy function, and the Weslock 2815 Hillcrest dummy handleset with New Heaven lever is a dummy rated for 1-3/8 inch to 2 inch doors.

The Baldwin 85352 Cody tops out at a 2 inch door. For thicker stock, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder unit rated 1-3/4 inch to 2-1/4 inch. The Yale Assure BYRD226CBARX and BYRD226NRRX with Ridgefield handleset also cover 1-3/4 inch to 2-1/4 inch if an electronic deadbolt suits the opening.

A turn piece on the interior operates the lock, so there is no key needed on the inside. That is what makes it an emergency egress handleset: a single turn from inside releases without hunting for a key, which is what most residential and multi-family codes want on a keyed entry door.

Fourteen finishes: 003 Polished Brass PVD, 031 Non-Lacquered Brass, 033 Vintage Brass, 044 Satin Brass PVD, 050 Satin Brass Black, 055 Polished Nickel PVD, 056 Satin Nickel, 060 Satin Brass Brown, 076 Graphite Nickel, 102 Oil Rubbed Bronze, 112 Venetian Bronze, 190 Satin Black, 260 Polished Chrome, and 402 Distressed Oil Rubbed Bronze. The PVD finishes are the ones to specify on a sun-exposed or coastal entry. Non-lacquered brass is a living finish and will patina on purpose.

Order the full dummy set in the same finish for the inactive leaf and the single cylinder handleset for the active leaf. If you want levers on both, pay attention to hand: the dummy lever is ordered LH Dummy or RH Dummy just like the entry version, so the two leaves usually take opposite hands.

A 1-3/4 inch door falls inside the Baldwin 85352 Cody range of 1-3/8 inch to 2 inch, so it fits. If you want a handleset built specifically around that thickness, the Kwikset 687AMD Amador single cylinder handleset and the Kwikset 687BW Belleview are both listed at 1-3/4 inch and are Grade 3 entrance function. The Schlage F60 Addison keyed entry handleset with Accent lever spans 1-3/8 inch to 1-3/4 inch and is a Grade 2 entrance lock.

If the submittal requires a stated grade, the Schlage F60 Addison keyed entry handleset with Accent lever and the Schlage JE285 Barcelona with Seville lever are both Grade 2, as is the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB series. The Kwikset 687BW Belleview is Grade 3. The Baldwin 85352 Cody remains the match on appearance, with 14 finishes including 056 Satin Nickel and 102 Oil Rubbed Bronze and a choice of oval knob or beavertail lever.

Deltana offers three solid brass entry handlesets: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all listed as entry function in solid brass. The Baldwin 85352 Cody is likewise an entry function lock and is offered in nickel-plated brass finishes such as 056 Satin Nickel along with 031 Non-Lacquered Brass and 033 Vintage Brass.

Yes. The Schlage JE285 Barcelona style handleset with Seville lever is a non-keyed entry function, Grade 2, for 1-3/8 inch to 1-3/4 inch doors, and the Schlage JI18/19 is an interconnected passage lock with Torino lever, also 1-3/8 inch to 1-3/4 inch. The Baldwin 85352 Cody is a keyed entry lock, with dummy versions available when the leaf needs trim only and no latching at all.

The Pamex FS7P31 Lexington is a single cylinder handleset in satin nickel with an entry function for 1-3/8 inch to 1-3/4 inch doors. The Baldwin 85352 Cody is also an entry function handleset and is offered in 056 Satin Nickel, but its range runs to a 2 inch door and it can be specified with either the 5024 oval knob or the 5452V beavertail lever inside. On a 2 inch door the Pamex is outside its stated range.

Go with the 5452V beavertail lever. It has a 4-3/32 inch grip and operates with a closed fist or a forearm, which the 5024 oval knob does not. The tradeoff is that the lever versions have to be ordered by hand (LH or RH), while the knob versions are non-handed and simpler to stock across a building.

Satin Nickel (056) is nickel plating over a brass substrate, so you get the nickel colour with brass weight behind it. It reads clean enough to sit on either a traditional or a contemporary entry, which is why it is the common spec when a building has a mix of door styles.

The Baldwin 85352 Cody offers a single cylinder handleset with interior 5024 oval knob as well as a full dummy set with interior knob. Comparable knob-interior handlesets include the Weslock 2810 Hillcrest single cylinder with Hudson knob for 1-3/8 inch to 2 inch doors, the Weslock 6695 Belmont dummy with Impresa knob at the same 1-3/8 inch to 2 inch range, and the Weslock 1411 Traditionale Colonial with Eleganti knob.