Baldwin 6402 Boulder Full Escutcheon Handleset Emergency Egress w/ 5024 Oval Knob or 5452V Beavertail Lever

Only if you take the lever. The lever versions are handed, ordered as LH or RH for both the entry and the dummy configurations. The oval knob versions (single cylinder handleset with interior knob, and full dummy set with interior knob) carry no handing call-out, so there is one part for either swing. Stand outside the door: if the hinges are on your left it's left hand.

The single cylinder versions are the working entry sets: keyed from the outside, thumb operated egress from inside, with either the 5024 oval knob or the 5452V beavertail lever inside. The full dummy versions have no latch and no cylinder at all, they're surface mounted trim that just gets pulled or pushed. On a pair of doors you buy one single cylinder set for the active leaf and one dummy for the inactive leaf so the two match.

Yes, that's the emergency egress design. From inside, turning the 5024 oval knob or the 5452V beavertail lever retracts the latch in one motion, no key and no separate turn piece. It's the arrangement you want on a house or a unit where anyone has to be able to clear the door fast. The outside is keyed on the single cylinder versions.

The Baldwin 6402 Boulder is a residential-style entry handleset with a full escutcheon. For an opening where the spec calls out ANSI Grade 1, the Falcon T101 is a Grade 1 heavy duty cylindrical passage lever, the Corbin Russwin CL3110 is a Grade 1 vandal resistant cylindrical lever in passage/closet function with a fire rating and a 1-3/4 inch to 2 inch door thickness range, and the Dexter C1000 Entry/Office is a Grade 1 keyed clutching lever for doors 1-3/8 inch to 1-3/4 inch. The Dexter C1000 Entry/Office is the one of those three that matches the 6402 on keyed entry function.

The Baldwin 6402 Boulder is an entry-function handleset that fits doors from 1-3/8 inch through 2 inch thick. The Deltana 6201 Manchester Lever is also an entry-function lever and lists the same 1-3/8 inch to 2 inch door thickness range, as do the Deltana 6411 Morant and 6431 Linstead entry levers. All three cover the same door thickness window as the 6402, so a door prepped for the Baldwin accepts any of them without changing the door thickness.

The Baldwin 6402 Boulder single cylinder handleset is keyed from the exterior. To get rid of keys entirely, the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function that is ADA compliant and fits doors 1-3/16 inch to 2 inch, and the Lockey 2835DC is the double combination version over the same door range. The Lockey 1150 is a heavy duty mechanical keypad lever set covering 1-1/8 inch to 2 inch doors, and the 1150S adds an adjustable backset. For an electronic keypad, the Delaney LP250 is a Grade 2 electronic keypad leverlock and Emtek builds a Classic Keypad Leverset.

The Baldwin 6402 Boulder is built in entry function only. For a door that must stay latched and locked to the outside while free-egressing, the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt for doors 1-3/8 inch to 1-3/4 inch, and the Hager 2580 with Withnell lever is a Grade 2 storeroom lock for 1-3/8 inch to 2 inch doors. For classroom keying, the Dexter C1000 Classroom is a Grade 1 clutching keyed lever, the C1000 Classroom Security adds the second cylinder function, and the Cal-Royal AG03 is a classroom lever cut to a 6-pin Schlage C keyway with a 2-3/4 inch backset.

The Baldwin 6402 Boulder fits doors 1-3/8 inch through 2 inch. The Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle over that identical 1-3/8 inch to 2 inch range, and the Hager 2540 with Withnell lever is listed in entrance function across the same thickness. The Falcon B511CP6D is a Grade 2 medium duty entry/office cylindrical lever, and the Cal-Royal AG00 is an entrance lever with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset for doors 1-3/8 inch to 1-3/4 inch.

Projection is 3.4 inches. That matters where the door swings toward a return wall, a screen or storm door, or a tight jamb pocket, because the grip needs clearance to be gripped. The interior lever also has a 4-3/32 inch grip length, so allow for that on the inside face where a wall is close to the hinge stile.

Fourteen finishes run on the Boulder 6402, and the brass tones cover most existing hardware: Polished Brass PVD, Non-Lacquered Brass, Vintage Brass, Satin Brass PVD, Satin Brass Black, and Satin Brass Brown. Nickel and dark options are Polished Nickel PVD, Satin Nickel, Graphite Nickel, Oil Rubbed Bronze, Distressed Oil Rubbed Bronze, Venetian Bronze, Satin Black, and Polished Chrome. Note Non-Lacquered Brass is a living finish that will patina; Polished Brass PVD holds its color.

No, the Boulder 6402 is a keyed mechanical entry handleset with no code entry. If you want keyless on a similar door, the Lockey 2835 mechanical pushbutton lever fits 1-3/16 to 2 inch doors, the Lockey 1150 heavy duty keypad lever set covers 1-1/8 to 2 inch, and the Delaney LP250 is an electronic keypad leverlock. None of those give you the full escutcheon look, so on a front door where appearance matters people often run the Boulder on the entry and a keyless lock on a side or service door.

The Boulder 6402 itself is an exterior style handleset in entry and dummy configurations only, so it covers the front door and any matching inactive leaf. For the interior passage and privacy doors you order separate leversets, matched by finish rather than by this model. If you want a dummy on a closet or a double door and are not tied to the Boulder look, the Accentra 455LN Augusta is a Grade 1 single dummy lever, the BEST 9K single dummy trim is Grade 1 heavy duty, and Emtek's Arts and Crafts and Cortina dummy pairs cover the decorative side.

The Boulder 6402 single cylinder versions are keyed on the exterior, so a single cylinder handleset plus a separate deadbolt means two cylinders on the door. To carry one key you need both cylinders in the same keyway and keyed alike, which is a keying decision made at order time rather than something the handleset does on its own. The dummy versions take no cylinder at all.

No. The Baldwin 6402 Boulder is an entry-function lock, meaning it is keyed from the outside. Passage levers such as the Falcon B101 Grade 2, the Hager 2510 Grade 2 with Withnell design, the Bravura Atlanta, and the Kwikset 200BRNL Breton Grade 3 have no cylinder at all and latch only, so they hold a door closed without ever locking it. Those belong on a hall or closet door, not on the exterior opening the 6402 is built for.

The Baldwin 6402 Boulder is a solid-brass-bodied entry handleset with a full escutcheon plate. Where a plain keyed entry lever will do, the Master Lock BC Series RL01 is a Grade 3 return-style keyed entry lever, the Callan Artino is a Grade 3 entrance leverset, and the Cal-Royal AUS00 is a Grade 3 entrance/office lever with a solid brass forged body fitting doors 1-3/8 inch to 1-3/4 inch. The Callan Bennett is a Grade 3 entrance leverset that ships as a deadbolt combo if the opening also needs a second point of locking.

The Baldwin 6402 Boulder is built in full dummy versions with either an interior knob or a lever, with the lever dummy handed left or right. If the decorative escutcheon is not required, the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever in the 5400 Series, the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim, and the BEST 7KC Series 1DT is the Grade 2 medium duty equivalent. Emtek offers dummy pairs in the Arts and Crafts and Cortina lever styles for openings where both sides of a fixed leaf need trim.

They look similar and do not interchange. The Baldwin 6402 Boulder is a complete handleset - escutcheon, exterior grip, cylinder and interior knob or lever, latching the door on its own. The Imperial USA ED-EL500HD is heavy duty escutcheon lever trim in entry function from the ED-500 Series, which mounts to an exit device rather than latching by itself. The Corbin Russwin 585F715 is likewise a Grade 1 lock lever for the ED8000 pushpad exit device. Neither replaces the 6402 on a door with no exit device on it.

The Baldwin 6402 Boulder is a decorative entry handleset intended to suit rustic and traditional architecture. Where cycle count drives the choice, the Falcon K101 is a Grade 1 heavy duty non-handed passage lock, fire rated, covering doors 1-3/8 inch to 2-1/4 inch; the Design Hardware X75 is a Grade 1 passage lever for 1-3/4 inch doors and the J75 is the Grade 2 version at the same thickness. The Arrow MK33 asylum lock is a heavy duty cylindrical lock cut to a Schlage C keyway for utility and service rooms in the same building.

A privacy lever is the right choice there and the 6402 Boulder is not - the Boulder is an entry-function handleset keyed from the outside, which no bath or bedroom door needs. The Kwikset 300BRNL Breton is a Grade 3 privacy lever set for doors 1-3/8 inch to 1-3/4 inch, and the Arrow MK02-TA is a privacy cylindrical lock with a Tudor knob, non-keyed and fire rated, for 1-3/4 inch to 2 inch doors.

The Satin Nickel is nickel plated over brass, so you get the nickel appearance with brass weight behind it. That's the difference a property manager feels on a front door that gets used every day, and it's why the Boulder trim reads heavier in the hand than a die cast handleset.

The Baldwin 6402 Boulder comes in 044 Satin Brass PVD, 050 Satin Brass Black, 060 Satin Brass Brown, 031 Non-Lacquered Brass and 033 Vintage Brass among its fourteen finishes. If a matching brass tone is needed on an interior door, the Bravura Miramar with round trim is a Grade 2 passage leverset in US4 satin brass. For satin nickel, which the 6402 carries as 056, the Callan Asheville is a Grade 3 passage leverset in a satin nickel finish.