The Boulder 85358 with Beavertail lever is a full dummy. There is no latch, no bolt, and no working mechanism behind it. It surface mounts to the door face as a fixed pull, so it belongs on an inactive leaf of a French or double door, a closet, or a pantry door that is held by a ball catch or roller catch rather than a latch. If you need the door to latch or lock, you want an entry or single cylinder handleset instead.

Handing matters. The Boulder dummy with Beavertail lever is built LH or RH, and both are offered in every finish. Pick the hand by standing outside the door: if the hinges are on your left, it is left hand. Order the wrong hand on a lever and the lever points the wrong way against the frame. On a pair of French doors where both leaves get a dummy, you need one of each.

The Boulder 85358 dummy has no cylinder and no bolt, so the active leaf needs a keyed set of its own. Single cylinder keyed handlesets available include the Schlage Residential F60 Addison with Accent lever (Grade 2, 1-3/8 to 1-3/4 inch doors), the Weslock 2810 Hillcrest with Hudson knob (1-3/8 to 2 inch), the Weslock 1411 Traditionale Colonial with Eleganti knob (1-3/4 to 2-1/4 inch), and the Pamex FS7P31 Lexington in satin nickel (1-3/8 to 1-3/4 inch). Match the door thickness first, then the trim style.

The Baldwin 85358 Boulder is a full dummy handleset with a Beavertail lever, so the peers to look at are the ones built on the same dummy function rather than an entry function. The Emtek 3002 Memphis, 3004 Hamilton, 3005 Melrose and 3006 Manhattan are all brass mortise entrance handlesets in a dummy function, and the Weslock 2815 Hillcrest dummy handleset pairs its dummy function with a New Heaven lever. If the lever is the point, the Weslock 2815 is the nearest match in form; the Emtek group carries the same non-operating function in four different series styles.

A dummy handleset like the Baldwin 85358 Boulder has no latch and no cylinder, so it will not secure an opening. For a keyed exterior door, the Schlage Residential F60 Addison is a single cylinder keyed entry handleset with an Accent lever, Grade 2, fitting doors 1-3/8 inch to 1-3/4 inch. The Weslock 2810 Hillcrest is a single cylinder handleset with a Hudson knob for doors 1-3/8 inch to 2 inch, and the Master Lock HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset in an entrance function. Order the dummy only where the leaf is fixed or inactive.

No, and it is the substitution that gets returned most often. The Baldwin 85358 Boulder is a full dummy, meaning the trim is fixed and there is no working latch. The Schlage Residential JE285 Barcelona with Seville lever is described as non-keyed but carries an entrance function, Grade 2, for doors 1-3/8 inch to 1-3/4 inch - the lever operates a latch, it simply is not keyed. If you need the door to latch shut without a key, the JE285 is the part; if you need trim on a fixed or inactive leaf, the Boulder dummy is.

Among the handleset peers, the Schlage Residential F60 Addison, JE285 Barcelona and JI18/19 interconnected lock are each Grade 2 for doors 1-3/8 inch to 1-3/4 inch, and the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2 in an entrance function. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3, built for 1-3/4 inch doors. The Baldwin 85358 Boulder is a residential product, so on a door where a written grade is part of the spec, the Grade 2 Schlage or Master Lock options are what to put on the order.

The inactive leaf takes dummy trim: the Baldwin 85358 Boulder full dummy with Beavertail lever, or the Weslock 2815 Hillcrest dummy with New Heaven lever for 1-3/8 inch to 2 inch doors, or one of the Emtek dummy handlesets such as the 3005 Melrose or 3006 Manhattan. The active leaf needs a working function - the Schlage Residential F60 Addison keyed entry with Accent lever, Grade 2, for 1-3/8 inch to 1-3/4 inch doors, or the Deltana 810871 Montego for 1-3/8 inch to 2 inch. Matching the two by series keeps the pair looking like one set.

Fourteen finishes, and each one is available in both hands: 003 Polished Brass, 031 Non-Lacquered Brass, 033 Vintage Brass, 044 Satin Brass, 050 Satin Brass and Black, 055 Polished Nickel, 056 Satin Nickel, 060 Satin Brass and Brown, 076 Graphite Nickel, 102 Oil Rubbed Bronze, 112 Venetian Bronze, 190 Satin Black, 260 Polished Chrome, and 402 Distressed Oil Rubbed Bronze. If you are matching a dummy to a working Baldwin entry set already on the house, match the finish number, not the finish name, since Baldwin uses several brass tones that read similarly in photos.

Residential. The Boulder 85358 is an Estate Series residential handleset, so it is meant for houses, condos and multi-family unit entries rather than a commercial opening on a cycle-rated spec. For a leasing office or a common-area door where a facility standard applies, look at a Grade 2 residential-plus option such as the Schlage Residential F60 Addison, or step up to a commercial mortise or cylindrical lockset.

A full dummy handleset does not need a cross bore or an edge bore, because there is no latch to run through the door edge and no spindle passing through. It fastens through the face of the door where the plate mounts. That makes it the usual choice on a door already hung and finished, or on a slab you do not want to drill a lock prep into.

Each Boulder 85358 dummy is one handed assembly for one door face, either left hand or right hand. Doing both leaves of a French door pair means two orders, one LH and one RH, in the same finish. That is the part most people get wrong on a pair of doors.

For keyless operation on a handleset opening, the Yale Real Living Assure line pairs a Ridgefield handleset with a touchscreen deadbolt: the BYRD226NRRX is standalone, the BYRD226CBARX adds Wi-Fi and Bluetooth, and the BYRD256 CBARX is key-free with Wi-Fi and passage handleset trim, all fitting 1-3/4 inch to 2-1/4 inch doors. The Kwikset 815SCEHFL-CP913CNT San Clemente combines a handleset with a Contemporary SmartCode keypad electronic deadbolt, SmartKey, RCAL latch and RCS strike, for 1-3/4 inch doors. These are functioning locks, unlike the Baldwin 85358 Boulder full dummy.

The Weslock 1411 Traditionale Colonial handleset with Eleganti knob covers 1-3/4 inch to 2-1/4 inch in a single cylinder function, and the Yale Real Living BYRD226NRRX Assure standalone touchscreen deadbolt with Ridgefield handleset also covers 1-3/4 inch to 2-1/4 inch. The Weslock 2815 Hillcrest dummy and Weslock 6695 Belmont dummy each cover 1-3/8 inch to 2 inch. Measure the leaf at the bore before choosing, since the Kwikset 687AMD Amador is built for 1-3/4 inch only.

Among the handlesets that pair a full-size exterior grip with a lever, the Kwikset 815SCEHFL-CP913CNT San Clemente uses a Halifax lever interior trim on a Signature Series handleset for 1-3/4 inch doors, and the Schlage Residential F60 Addison uses an Accent lever in a Grade 2 keyed entry for 1-3/8 inch to 1-3/4 inch doors. Weslock 2815 Hillcrest carries a New Heaven lever in a dummy function. Handlesets built on knobs instead - Weslock 1411 with the Eleganti knob, Weslock 6695 Belmont with the Impresa knob, Weslock 2810 Hillcrest with the Hudson knob - will not give you the lever grip that the Baldwin Beavertail does.

Deltana offers four solid brass handlesets in an entry function: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, each listed as entry solid brass, plus the 810871 Montego, which fits doors 1-3/8 inch to 2 inch. Emtek's brass mortise entrance handlesets come in the Memphis 3002, Hamilton 3004, Melrose 3005 and Manhattan 3006 series. The Deltana and Emtek series differ from one another mainly in the shape of the grip and escutcheon, so pick on the profile that matches the rest of the doors.

The Kwikset 687AMD SMT Amador and 687BW SMT Belleview single cylinder keyed handlesets are both listed as exterior only with SmartKey, Grade 3, for 1-3/4 inch doors, and the 687AMD SMC version carries the SC1 keyway with SmartKey. Those are the exterior-only options in the handleset group. The Baldwin 85358 Boulder is a complete full dummy handleset with the Beavertail lever, so it is ordered as a set rather than as a replacement grip.

Yes. The Weslock 6695 Belmont dummy handleset uses an Impresa knob and is an Elegance Series product fitting doors 1-3/8 inch to 2 inch in a dummy function. The Weslock 2815 Hillcrest is the lever counterpart, with a New Heaven lever in the Premiere Essentials Series over the same 1-3/8 inch to 2 inch range. The Baldwin 85358 Boulder pairs its dummy function with the Beavertail lever, so the Weslock 6695 is the option when the rest of the doors are on knobs.

The Weslock 1411 Traditionale Colonial single cylinder handleset spans 1-3/4 inch to 2-1/4 inch, and the Yale Real Living BYRD410BLERX Assure Lock 2 key-free touchscreen deadbolt with Wi-Fi and Ridgefield handleset spans 1-3/8 inch to 2-1/4 inch, the broadest of the group. The Weslock Premiere Essentials 2810 Hillcrest and Elegance Series 6695 Belmont each cover 1-3/8 inch to 2 inch, while the Pamex FS7P31 Lexington single cylinder handleset covers 1-3/8 inch to 1-3/4 inch in a satin nickel finish. If the doors vary across the property, the wider-range parts reduce how many part numbers you carry.

The Boulder 85358 is part of Baldwin's Estate Series, so it is drawn to the same plate proportions and finish palette as other Estate handlesets. For a property manager standardizing a building, the practical match points are the collection and the finish code. Order the same finish number you already have on the working sets and the dummy will read as the same family across a pair of doors.