Baldwin Reserve Taper Passage Leverset with Rustic Rose

It drops into the standard 2-1/8 inch cross bore with a 1 inch edge bore, and it works with either a 2-3/8 or 2-3/4 inch backset, so it covers both of the common residential prep dimensions without redrilling. If your door already carries a knob or lever on a 2-1/8 inch bore, the Taper mounts to it.

It is a residential lockset. For an office corridor, a school, or anything on a commercial occupancy schedule, step to a Grade 1 or Grade 2 cylindrical passage lever instead, such as the Falcon K101 (Grade 1, heavy duty, 1-3/8 to 2-1/4 inch doors) or the Hager 2510 Withnell passage lever (Grade 2, 1-3/8 to 2 inch doors). The Baldwin is the right choice for homes, apartments, and hospitality interiors where the look drives the decision.

The Baldwin Reserve Taper leverset is passage function, non-keyed, which means the latch retracts from either side and nothing locks. For a bedroom or bathroom that needs a thumbturn, the Kwikset 300BRNL Breton is a Grade 3 privacy lever set for 1-3/8 inch to 1-3/4 inch doors, and the Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever for 1-3/8 inch to 2 inch doors. If the door needs a key, the Hager 2525 is a Grade 2 entry lock with a lever handle and the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway, keyed different, 2-3/8 inch backset.

The Baldwin Reserve Taper passage leverset is a residential cylindrical passage lock, so a commercial opening usually needs a graded peer instead. The Falcon K101 is a Grade 1 passage cylindrical lock with non-handed levers, heavy duty, fire rated, and fits doors 1-3/8 inch to 2-1/4 inch. The Corbin Russwin CL3110 is another Grade 1 passage/closet lever, vandal resistant and fire rated, for 1-3/4 inch to 2 inch doors. Both hold the same passage function - latch only, no lock - so the door behavior matches while the duty level changes.

Two rustic rose shapes, the Rustic Arch (RAR) and the Rustic Square (RSR), each offered in 481 Dark Bronze and 492 White Bronze. All four combinations are available, so you can match a square rose to a square-trim door package or the arch rose to a softer traditional look without changing finish.

Yes. Split finish and split rose are both available as write-in options when you order, so the hall side can carry one finish or rose shape and the room side another. That is how you keep a bedroom side matching the bedroom package while the corridor side matches the rest of the floor.

The Taper passage set always operates a latch, so for a false leaf or a door with no bore you need a dummy trim. Options include the Emtek Classic Brass Cortina dummy pair, the Emtek Arts and Crafts dummy pair, or, in a heavier commercial line, the BEST 9K Series 1DT single dummy trim. Match the finish family to the Dark Bronze or White Bronze you chose on the Taper.

This Taper set covers the passage openings only, non-keyed and non-locking. Halls, closets, pantries, and laundry doors take this one; bedrooms and baths need a privacy lever, and exterior or office doors need a keyed entry set. Keeping the same Reserve Series lever and rustic rose across those functions is how the look stays consistent through the house.

The Baldwin Reserve Taper passage leverset is a Reserve Series rustic design piece. For a plain hall or closet door where appearance is not driving the choice, the Kwikset 200BRNL Breton passage lever set is a Grade 3 passage/hall/closet lever for 1-3/8 inch to 1-3/4 inch doors, and the Callan Asheville is a Grade 3 passage leverset in satin nickel. The Bravura Atlanta and Bravura Orlando are Grade 2 passage leversets with round trim. All carry the same latch-only passage function.

No. The Baldwin Reserve Taper is a passage leverset with a working latch, bored for a 2-1/8 inch cross bore with a 1 inch edge bore and a 2-3/8 or 2-3/4 inch backset. A dummy has no latch and no bore behind it - it surface mounts as a pull. The Emtek Arts and Crafts dummy pair, the Callan Bentley Grade 2 dummy lever, and the BEST 7KC single dummy trim lever are dummy function, so they will not latch a closet door shut. Order a dummy only for an inactive leaf or a false door.

All of these hold the same passage/hall/closet function as the Baldwin Reserve Taper leverset. The Accentra 5301LN Augusta is a Grade 2 cylindrical lever in the 5300 Series and the Accentra 4601LN is Grade 2 in the 4600 Series with Augusta trim. The Arrow GL01 is a Grade 2 Sierra lever, non-keyed, for 1-3/4 inch to 2 inch doors. The Hager 2510 is Grade 2 with the Withnell design for 1-3/8 inch to 2 inch doors, the Design Hardware J75 is a Grade 2 flat lever for 1-3/4 inch doors, and the Falcon B101 is a Grade 2 medium duty passage lever with a non-handed design.

The Baldwin Reserve Taper passage leverset offers the RSR rustic square rose alongside the RAR rustic arch rose, in 481 dark bronze and 492 white bronze. If you want square trim from another line, the Bravura Tampa is a Grade 2 passage leverset with square trim. For round trim in the same function, the Bravura Miramar is a Grade 2 passage leverset in US4 satin brass.