Baldwin Reserve Curve Passage Leverset with Traditional Rose

Watch three. The Corbin Russwin 585F715 is a Grade 1 lock lever for the ED8000 pushpad exit device and CL3300 Series - it is exit device trim, not a standalone lockset. The Accentra 107S is a Schlage cylinder adapter kit for Yale hardware, a keying part with no lever body. The Callan Bentley is a Grade 2 dummy lever with no working latch. The Baldwin Reserve Curve is a complete cylindrical passage leverset with a functioning latch on a 2-3/8 or 2-3/4 inch backset.

The Baldwin Reserve Curve passage leverset uses a working latch: the lever turns and retracts a latchbolt into the standard 2-1/8 inch bore with a 2-3/8 or 2-3/4 inch backset. A dummy lever has no latch and no bore at all - it is surface mounted trim that does not move. The BEST 9K Series 1DT is a Grade 1 non-keyed single dummy trim lever, the BEST 7KC Series 1DT is the Grade 2 medium duty equivalent, and the Emtek Arts and Crafts dummy is sold as a pair. Order a dummy only for an inactive leaf; it will not operate a latch.

The Baldwin Reserve Curve passage leverset is a residential cylindrical lever with passage function and no keying. For the same door opening in a graded commercial lever, the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock with non-handed levers, fire rated, covering doors 1-3/8 inch to 2-1/4 inch thick. The Corbin Russwin CL3110 is another Grade 1 passage/closet lever, vandal resistant and fire rated, for 1-3/4 inch to 2 inch doors. Both operate the same way as the Baldwin - lever always retracts the latch, nothing to lock.

The Baldwin Reserve Curve leverset is passage function, which never locks. For a bed or bath door, the Kwikset 300BRNL RDT Breton is a Grade 3 privacy lever set for 1-3/8 inch to 1-3/4 inch doors, and the Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever for 1-3/8 inch to 2 inch doors. The Arrow MK02-TA is a privacy cylindrical lock with a Tudor knob rather than a lever, and it carries a fire rating.

No - the Baldwin Reserve Curve leverset is passage function and non-keyed, so it secures nothing. For a storeroom door, the Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt for 1-3/8 inch to 1-3/4 inch doors, and the Hager 2580 is a Grade 2 storeroom cylindrical lock with the Withnell lever for 1-3/8 inch to 2 inch doors. For a utility or institutional opening, the Dexter C1000 asylum F87 is a Grade 1 lock covering 1-3/8 inch to 2 inch doors.

For a standard set, no, because both sides come as a matched pair. Handing only comes up if you are ordering split levers, meaning a different lever style on each face, which is called out as an option on the order form along with split rose and split finish.

Yes. The Reserve Curve passage set can be built split, with a different rose shape on each face, a different finish on each face, or both. Enter what you want on each side in the split rose and split finish fields when ordering.

A passage set operates a latch, so it will not work on an inactive or false door. For those you need a dummy trim. Baldwin builds the Reserve Curve in dummy form for a finish match. If a match is not needed, the Emtek Classic Brass Cortina dummy pair and the Callan Bentley Grade 2 dummy lever are options we carry.

Measure from the door edge to the center of the bore hole. Residential doors are usually 2-3/8 inch and commercial or heavier residential doors are often 2-3/4 inch; the Reserve Curve passage set covers both, so you specify the one your door already has rather than re-boring.

The Baldwin Reserve Curve passage leverset is a traditional design offered with Traditional Arch, Round, and Square roses across finishes including Polished Brass PVD, Venetian Bronze, Satin Nickel, and Satin Black. On the decorative side, the Bravura Miramar with round trim is a Grade 2 passage leverset in US4 satin brass, the Bravura Tampa is a Grade 2 passage leverset with square trim, and the Bravura Atlanta is a Grade 2 passage leverset with round trim. The Bravura sets carry an ANSI grade; the Baldwin is a residential set with three rose shapes to match adjacent doors.

The Baldwin Reserve Curve leverset is non-keyed with no cylinder. If the opening needs a key, the Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever for 1-3/8 inch to 2 inch doors, the Falcon B511CP6D is a Grade 2 medium duty entry/office lever, and the Dexter C1000 entry/office is a Grade 1 clutching keyed lever for 1-3/8 inch to 1-3/4 inch doors. These are keyed functions, so the door will also need a strike and key system decision the passage Baldwin does not require.

The Baldwin Reserve Curve passage leverset is built for residential use. In a corridor seeing constant traffic, the Falcon T101 is a Grade 1 heavy duty passage lever with pressure release technology in the T Series, and the Falcon K101 is a Grade 1 heavy duty passage lock with non-handed levers. The Design Hardware X75 is a Grade 1 passage lever with a flat lever for 1-3/4 inch doors. Each performs the same passage function, latch retracting from both sides at all times.

The Baldwin Reserve Curve leverset is a mechanical passage lever with no code entry. Where controlled access is wanted on the same lever prep, the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance for 1-3/16 inch to 2 inch doors, and the Lockey 1150 is a heavy duty mechanical keypad lever set with double combination and passage function for 1-1/8 inch to 2 inch doors. The Delaney LP250 is an electronic keypad leverlock at Grade 2.

The Baldwin Reserve Curve passage leverset handles both 2-3/8 and 2-3/4 inch backsets with a 1 inch edge bore. Among the passage levers, the Arrow GL01 with the Sierra lever is a Grade 2 non-keyed passage lock for 1-3/4 inch to 2 inch doors, and the Accentra 5301LN Augusta is a Grade 2 passage/closet lever in the 5300 Series. The Accentra 4601LN carries the same Grade 2 passage function with Augusta trim in the 4600 Series.