Baldwin Reserve Arch Passage Leverset with Rustic Rose
- Reserve Arch Passage Leverset with Rustic Rose options is an appealing and well-crafted design with a locking mechanism perfect for moments when you prefer a little time for yourself.
- Knob or lever set paired with roses with a privacy lock to both close and secure any door with the 2.125" standard door preparation.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Keyed Function:
- Non-Keyed
- Subcategory:
- Door Levers
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Product Type:
- Leversets
- Keyed:
- No
- Commercial/Residential:
- Residential
- Handle Type:
- Lever
- Lock Function:
- Passage
- Edge Bore:
- 1"
- Collection:
- Reserve Series
- Product Attribute:
- Cylindrical Locks
- Backset (Distance):
- 2-3/8 or 2-3/4
- Product Function:
- Passage/Hall/Closet
- Product Design:
- Rustic
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Baldwin PSARCRAR481 – Frequently Asked Questions
1) Does the Baldwin Reserve Arch passage lever lock, or is it always free-turning?
It's a passage set, non-keyed and with no lock at all. Both levers always retract the latch, which is what you want on a hall, closet, or pantry door. If you need the door to lock from inside for a bedroom or bath, you need a privacy function instead, and for a keyed opening you need an entry function.
2) Will the Baldwin Reserve Arch leverset fit my existing door bore?
It goes into a standard bored prep: 2-1/8 inch cross bore with a 1 inch edge bore, on either a 2-3/8 or 2-3/4 inch backset. That's the same prep almost every residential cylindrical knob or lever uses, so a straight swap onto an existing door normally needs no new drilling.
3) What commercial-rated passage lever can replace the Baldwin Reserve Arch Passage Leverset on a heavier-traffic opening?
The Baldwin Reserve Arch Passage Leverset with Rustic Rose is a residential passage lever. For a commercial-duty opening in the same passage/hall/closet function, the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock rated for doors 1-3/8 inch to 2-1/4 inch thick and fire rated, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet lever lock, fire rated, for doors 1-3/4 inch to 2 inch. Both are non-keyed like the Baldwin, so the door prep intent is the same; the Baldwin carries the decorative Reserve Series rustic rose trim that the commercial locks do not.
4) Which passage lever should I standardize on for a school or institutional corridor instead of the Baldwin Reserve Arch?
The Baldwin Reserve Arch Passage Leverset is a residential Reserve Series lever. For an institutional standard in the same passage function, the Design Hardware X75 is a Grade 1 passage lever lockset for 1-3/4 inch doors, the Falcon T101 is a Grade 1 heavy duty passage lever with pressure release technology, and the Dexter C1000 passage is a Grade 1 clutching non-keyed passage lever for doors 1-3/8 to 1-3/4 inch. The Accentra 5301LN Augusta and Arrow GL01 Sierra are Grade 2 passage levers if a medium-duty standard suits the traffic.
5) I need a keyed lever for an entry door, not the Baldwin Reserve Arch passage set. What are my options?
The Baldwin Reserve Arch Passage Leverset is non-keyed, so it will not secure an entry. For a keyed lever, the Hager 2525 is a Grade 2 commercial cylindrical entry lock with lever handle for doors 1-3/8 to 2 inch, the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway keyed different and 2-3/8 inch backset, and the Falcon B511CP6D is a Grade 2 medium duty entry/office lever. On the decorative side, the Deltana 6201 Manchester lever entry covers doors 1-3/8 to 2 inch.
6) Can I have a different finish or rose on each side of the door?
Yes. Split rose, split finish, and split lever handing can all be specified as written options when ordering, so a hallway side can carry one finish or rose shape and the room side another. Useful when a bedroom is finished differently from the corridor it opens onto.
7) Does handing matter when I order this Baldwin lever?
For a matched pair of levers you don't need to declare handing, but if you're splitting the levers so each face differs, the split levers handing option is where you state which side gets which. Otherwise just confirm the backset your door is drilled to, 2-3/8 or 2-3/4 inch.
8) Is there a simpler passage leverset than the Baldwin Reserve Arch for interior hall and closet doors?
Yes. The Baldwin Reserve Arch Passage Leverset uses Reserve Series rustic rose trim in Dark Bronze or White Bronze. For a plainer interior passage lever, the Kwikset 200BRNL Breton passage lever set is Grade 3 for doors 1-3/8 to 1-3/4 inch, and the Callan Asheville AH5011 is a Grade 3 passage leverset in satin nickel. The Bravura Atlanta and Bravura Orlando passage leversets are Grade 2 with round trim, and the Bravura Tampa is Grade 2 with square trim if you want a squared rose like the Baldwin RSR option.
9) Can I use a dummy lever in place of the Baldwin Reserve Arch Passage Leverset?
Only on a door that does not need a working latch. The Baldwin Reserve Arch Passage Leverset is a cylindrical passage lock with a latch and a 1 inch edge bore, so it latches the door closed. A dummy such as the Emtek Arts and Crafts dummy lever pair, the Callan Bentley BN5051 Grade 2 dummy lever, or the BEST 9K Series 1DT Grade 1 single dummy trim is surface trim with no latch at all, used on inactive or closet-slab doors. If the door has to stay shut, the passage lever is the correct part.
10) I want keyless code entry rather than the Baldwin Reserve Arch passage lever. What comparable lever locks take a code?
The Baldwin Reserve Arch Passage Leverset is a mechanical non-keyed passage lever with no code entry. For keyless code access in a lever format, the Lockey 2835 mechanical pushbutton keyless lever lock has passage function and ADA compliance for doors 1-3/16 inch to 2 inch, the Lockey 1150 is a heavy duty mechanical keypad lever set with double combination passage function for doors 1-1/8 inch to 2 inch, and the Delaney LP250 is a Grade 2 electronic keypad leverlock.
11) What rose shapes and finishes does the Baldwin Reserve Arch rustic lever come in?
Two rustic rose shapes, Rustic Arch (RAR) and Rustic Square (RSR), each in 481 Dark Bronze or 492 White Bronze. Four combinations total. Pick the rose shape to match the other trim in the room; square roses read more transitional, the arch rose more traditional.
12) I want the same rustic look on a door that doesn't need a working latch. What do I use?
A passage set isn't the right part for a false or inactive door, since it carries a live latch. Use a dummy trim instead: Emtek offers Arts and Crafts and Hammered lever dummy pairs in the same rustic vein, and for commercial-weight trim there are the BEST 9K 1DT Grade 1 and 7KC 1DT Grade 2 single dummy levers.
How fast can I get the Baldwin PSARCRAR481 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin PSARCRAR481 come with a warranty?
Absolutely. The Baldwin PSARCRAR481 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin PSARCRAR481?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin PSARCRAR481 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.