You may also like
BALDWIN Estate 4505 1-1/2" Universal Floor Bumper
KEY FEATURES
-
Floor Bumper prevents damage to wall and door and comes with complete mounting hardware.
-
1.1875" Diameter
-
Durable and resilient rubber guard is replaceable.
-
Comes with complete mounting hardware
-
Our Lifetime Satin Nickel finish is create by nickel-plating solid brass, to bring about the beauty of the warm and smooth silver tone, combined with the weight and quality of brass. This satin, matte-like PVD finish is extremely durable and is backed by our Limited Lifetime Finish™ Warranty.
-
Utilize our beautiful and quality decorative door hardware that is guaranteed to match the finish of your other Baldwin hardware pieces.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Subcategory:
- Door Stops, Holders, Silencers & Bumpers
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Product Type:
- Floor Door Stops
- Commercial/Residential:
- Residential
- Collection:
- Estate Series
- Product Model:
- 4505
- Product Diameter:
- 1-1/2"
- Product Category:
- Door Trim and Accessories
- Department:
- Door Hardware
Baldwin 4505190 – Frequently Asked Questions
1) Will the Baldwin Estate 4505 floor bumper match my other Baldwin door hardware?
That is what the 4505 is for. It comes in nine Baldwin finishes, so you can pick the same code as the levers, hinges, and rosettes already on the job: 003 Polished Brass PVD, 033 Vintage Brass, 055 Polished Nickel PVD, 056 Lifetime PVD Satin Nickel, 060 Satin Brass Brown, 102 Oil Rubbed Bronze, 112 Venetian Bronze, 190 Satin Black, and 260 Polished Chrome. Order the bumper in the same finish number you used elsewhere and the tone lines up across the opening.
2) Do I need to buy screws or anchors separately for the Baldwin 4505 floor stop?
No. The 4505 ships with complete mounting hardware, so the fastener for mounting the bumper is in the box. Anything unusual for the substrate, like a masonry anchor for a concrete slab, is on you, but for a normal installation nothing else is required.
3) Is the Baldwin Estate 4505 bumper suitable for a commercial building or high-traffic doors?
Baldwin lists the Estate 4505 as residential. For homes, condos, and light multi-family use it is the right piece, especially where the finish has to match decorative Baldwin trim. For an office corridor, school, or anywhere the doors get kicked open all day, step up to a cast or heavy duty floor stop such as the Trimco 1209 Series extra heavy duty stops and holders, or the Trimco 1200/1201 cast floor stop.
4) Does the Baldwin 4505 hold a door open, or does it just stop it?
Stop only. The 4505 is a bumper: it takes the swing and protects the wall and the door face, but it has no catch or holder to keep the door standing open. If you need the door to stay put, look at a stop-and-holder such as the Trimco 1209 Series stops and holders instead.
5) What is the difference between the Baldwin 4505 floor bumper and the Trimco 1214 floor stop?
Both are floor-mounted stops that catch the door leaf before it reaches the wall. The Baldwin Estate 4505 is a 1-1/2 inch universal floor bumper offered in nine decorative finishes including Polished Brass PVD, Oil Rubbed Bronze, Satin Black and Polished Chrome, and it is built for residential openings. The Trimco 1214 is a 1.75 inch floor stop from the 1214 Series. If you are matching the stop to decorative Baldwin trim on the same door, the 4505 is the finish-matched choice; if you want the larger footprint on the floor, the 1214 is the taller unit.
6) The Baldwin 4505 is a residential bumper. What floor stop should I use on a high-traffic commercial opening instead?
The Baldwin Estate 4505 is catalogued for residential use, which suits a house or an apartment interior door. For an opening that takes constant abuse - a corridor door in a school, a stairwell, a back-of-house door in a hotel - the Trimco 1209 Series is an extra heavy duty stop and holder line built for that duty. The 1209 also gives you the holder function, so the door can be parked open, which the 4505 does not do; it is a bumper only.
7) I need a floor stop that also holds the door open. Does the Baldwin 4505 do that?
No. The Baldwin Estate 4505 is a floor bumper - a rubber-guarded stop that arrests the door and nothing more. For a hold-open, the Trimco 1209 Series is an extra heavy duty stop and holder, meaning the same casting both stops the door and retains it in the open position. Specify the 1209 where the door needs to stay parked, and the 4505 where you only need to protect the wall.
8) Is the Trimco 1200/1201 a direct replacement for a Baldwin 4505 floor bumper?
Not a drop-in. Both mount to the floor, but the Trimco 1200/1201 is a 3 inch cast floor stop while the Baldwin Estate 4505 is 1-1/2 inch, so the projection and the footprint on the floor are different and the existing anchor point will not line up by default. Swapping one for the other means re-checking where the door leaf makes contact. If you are replacing a 4505 and want the same reach and the same finish family, order another 4505 in the matching finish - its rubber guard is replaceable, so a worn bumper often does not need the whole unit changed.
9) Should I use a floor bumper like the Baldwin 4505 or a wall-mounted door stop?
A floor bumper takes the impact at the bottom of the door, near the leading edge, and works where the wall behind the door is drywall, a corner, a baseboard heater, or anything you cannot anchor into. The 4505 is a floor-mounted bumper that stops the door before it reaches the wall. A wall stop is the better call when you do not want anything protruding from the floor, for example in a path that gets mopped or where a stop would be a trip point. Where the door swings into open floor space, the floor bumper is the one that actually catches it.
10) The rubber on my floor stop is chewed up. Can I replace just the bumper on a Baldwin 4505?
Yes. The rubber guard on the 4505 is replaceable, so a bumper that has been flattened or torn by a heavy door does not mean pulling the base and re-drilling the floor. That matters for a property manager running the same stop across a building: you replace the wear part and keep the mounting.
11) What is a plainer alternative to the Baldwin Estate 4505 floor bumper?
The Baldwin Estate 4505 is a decorative floor bumper sold in nine finishes so it matches the rest of a Baldwin Estate Series trim package on the door. If the finish match is not driving the job, the Trimco 1200/1201 cast floor stop is a 3 inch cast unit and the Trimco 1214 is a 1.75 inch floor stop - both are utility stops rather than part of a decorative suite. Use the 4505 when the stop is visible in a finished space and has to read with the knob and hinges.
12) My floor is stone and I cannot drill into it. Is there an alternative to a floor-mounted bumper like the Baldwin 4505?
The Baldwin Estate 4505 is a floor door stop and has to land in the floor. Where the floor cannot be penetrated, the Trimco 1211 Series is a universal door stop line, which covers mounting configurations beyond floor-only - that is the family to look at when the fastening surface has to change. Keep the 4505 where you have a drillable floor and want the bumper to match the door's Baldwin trim finish.
13) I am standardizing floor stops across a whole building. Should I spec the Baldwin 4505 or a Trimco series?
It depends on whether the stops are decorative or functional in that building. The Baldwin Estate 4505 is a residential 1-1/2 inch bumper in nine finishes, which is what you want in units and public-facing spaces where hardware finish is part of the look. For back-of-house and heavy-traffic doors, the Trimco 1209 Series extra heavy duty stops and holders and the Trimco 1211 Series universal door stops are the families built to be spread across an openings schedule. Many buildings run both - the 4505 where it shows, a Trimco series where it works.
14) Does the word universal in the Baldwin 4505 Universal Floor Bumper mean the same thing as the Trimco 1211 Universal Door Stops?
No, and it is worth catching before you order. The Baldwin Estate 4505 is a floor door stop - universal there describes the bumper itself, which arrives with complete mounting hardware for a floor installation. The Trimco 1211 Series is a universal door stop family, where universal describes the range of the series. If your opening genuinely needs a mounting option other than the floor, the 1211 Series is the one to look at rather than assuming the 4505 covers it.
15) What does Baldwin's 056 Lifetime PVD Satin Nickel finish actually mean on the 4505 bumper?
The 056 finish is nickel plate over solid brass, applied as a PVD coating, giving a matte silver tone on a brass body. PVD is a hard coating, which is what you want on a part that gets struck by a door and hit by a mop. If you are standardizing a building on satin nickel, 056 is the code to keep on the order.
How fast can I get the Baldwin 4505190 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin 4505190 come with a warranty?
Absolutely. The Baldwin 4505190 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin 4505190?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin 4505190 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.