Baldwin Estate 5103 RIGHT Hand Half Dummy Lever with 5048 Rose

A half dummy is a non-functioning lever, surface mounted on one side of the door only. There is no latch, no spindle, and no moving mechanism, so it serves purely as a pull. The Baldwin Estate 5103 with 5048 rose is that kind of trim, catalogued with a Dummy function. Use it on a door that does not latch, an inactive leaf of a double door, a closet or pantry door held by a ball catch or magnetic catch, or a false door built for symmetry. If the door needs to latch shut, you want a passage lever instead, such as the Falcon B101 or the Kwikset 200BRNL Breton passage set.

Yes, it is handed. Model 5103.RDM is the RIGHT hand lever, so the handle points to the right when you are facing the mounted side of the door. Because a half dummy only mounts on one face, pick the hand by standing on the side where the lever will be seen and choosing the direction you want the lever to throw. Ordering the wrong hand on a lever like this leaves you with a lever pointing the wrong way, and it cannot be reversed the way a working cylindrical lever can.

No. A half dummy has no latch and no chassis passing through the door, so it mounts to the face of the door with screws and does not require the 2-1/8 inch cross bore that the working Estate knob and lever sets use for standard door preparation. That makes it the usual choice on a solid door or a false door where you do not want to drill a full lockset prep. If you already have a bored door and want it covered, plan on a working set or a filler, since the dummy rose is sized to the trim, not to the bore.

The Estate 5103 with 5048 rose is a half dummy, meaning a single lever for one face of the door. For trim on both faces you need two, and on a handed lever like this that usually means one right hand and one left hand so the levers mirror each other. If you would rather buy a matched set in one order, Emtek sells dummy leversets as a pair, including the Arts and Crafts lever and the Cortina lever in the Classic Brass line.

No. Baldwin classifies the Estate 5103 as residential door hardware, so it is intended for homes and residential interiors rather than commercial openings with cycle and grade requirements. For commercial dummy trim, look at the BEST 9K Series 1DT single dummy in Grade 1 heavy duty, or the BEST 7KC Series single dummy in Grade 2. The Accentra 455LN Augusta single dummy is another Grade 1 heavy duty option.

No. The Baldwin Estate 5103 is a dummy lever, so it is surface-mounted and does not operate a latch. If you need a lever that retracts a latchbolt on a hall or closet door, look at a passage function lockset such as the Accentra 5301LN Augusta Grade 2 passage lever or the Hager 2510 Grade 2 passage cylindrical lever with Withnell design.

No. The Baldwin Estate 5103 is dummy trim with no latch or locking mechanism. For a privacy opening, use a privacy function set such as the Kwikset 300BRNL RDT Breton Grade 3 privacy lever for doors 1-3/8 inch to 1-3/4 inch thick, or the Hager 2540 Grade 2 privacy cylindrical lock with Withnell lever for doors 1-3/8 inch to 2 inch thick.

Eleven finishes: 003 Polished Brass, 031 Non-Lacquered Brass, 033 Vintage Brass, 044 Satin Brass, 055 Polished Nickel, 056 Satin Nickel, 076 Graphite Nickel, 102 Oil Rubbed Bronze, 112 Venetian Bronze, 190 Satin Black, and 260 Polished Chrome. Since this is Estate Series trim, matching by the Baldwin finish number is the reliable way to keep a dummy lever consistent with the working Estate sets already on the other openings. Note that 031 Non-Lacquered Brass and 102 Oil Rubbed Bronze are living finishes that change with handling over time.

The Callan Bentley is a Grade 2 dummy lever, and it is the simpler option when you want the look of a lever pull without the Estate Series trim. For a heavier duty non-keyed dummy on a corridor or common-area leaf, the BEST 7KC Series single dummy trim is Grade 2 medium duty and the 9K Series 1DT is Grade 1 heavy duty. All three are dummy function, so they do the same job as the 5103: a fixed pull with no latch.

The Baldwin Estate 5103 half dummy covers one face of the door. For a two-sided application such as a French door or a closet pair, Emtek sells dummy pairs, including the Arts & Crafts lever dummy pair, the Hammered lever dummy pair, and the Classic Brass Cortina lever dummy pair.

The Baldwin Estate 5103 half dummy is ordered right hand, so the trim must match the door swing. If you would rather stock one part that works either way, the Falcon B101 Grade 2 cylindrical passage lever and the Falcon K101 Grade 1 passage lock both use a non-handed lever design, though those are latching passage locks rather than dummy trim.

The Baldwin Estate 5103 is non-keyed dummy trim. For a keyed opening, the Deltana 6201 Manchester lever entry fits doors 1-3/8 inch to 2 inch thick, and the Cal-Royal AG00 entrance lever is Grade 2 with a 6-pin Schlage C keyway and a 2-3/8 inch backset for doors 1-3/8 inch to 1-3/4 inch.

The 5048 rose is the Baldwin Estate round rose, and it is the same rose used across Estate trim, so specifying 5103 with the 5048 rose and the same finish number keeps a dummy leaf visually identical to the working Estate levers beside it. If your existing openings use a different Estate rose number or an escutcheon plate rather than a rose, the trim shape will not match even though the lever does, so check the rose number stamped on what is already installed.