You may also like
Baldwin Estate 6944 Pasadena Single Cylinder Entry Mortise Lock Trim
-
The Pasadena Entrance Trim is a modern and textured trim uniquely designed to elevate functionality and visual appeal.
-
Shown in Standard Right Hand Entry Function, but also available in Left Hand Entry, Double Cylinder, Full Dummy, Exterior Only and Back to Back, as well as individual escutcheons Cut for Cylinder, Cut for Emergency Release, Cut for Knob and Cut for Turn Knob.
-
Customize by substituting any interior knob or lever of your choice or by utilizing the interior escutcheon plate to create passage, privacy, dummy or entry sets. Thin and thick door kits available to accommodate a wide range of door conditions and applications.
-
The mortise application is a unique door condition that requires custom door preparation, specification and installation. The full mortise specification requires multiple components, including this decorative trim. To learn more about specifying mortise, please refer to the "Know Before You Go" section on this page.
-
Added detailing brings age-worn dimension to the lustrous texture of Oil-Rubbed Bronze.
Manufacturer Resources
Product Specs
- Collection:
- Estate Series
- Subcategory:
- Handlesets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Product Type:
- Handlesets
- Commercial/Residential:
- Residential
- Keyed:
- Yes
- Lock Function:
- Entry
- Lever Knob Design:
- 5190 Lever
- Cylinder and Keyways:
- C-Keyway
- Keyed Function:
- Single Cylinder
- Product Function:
- Entrance
- Door Thickness Range:
- 1-3/4"
- Product Design:
- Pasadena
- Product Dimension:
- 3-7/20" x 19"
- Keyway Profile:
- C-Keyway
- Door Strike:
- Mortise
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Baldwin 6944112RENT – Frequently Asked Questions
1) Is the Baldwin Estate 6944 Pasadena a complete lock, or just the trim?
It is decorative trim only. The Pasadena 6944 is the escutcheon and handle trim for a mortise application, and a full mortise installation needs additional components beyond this trim, including the mortise lock body itself and the cylinder. Mortise is a custom door condition requiring specific door prep and specification, so plan the opening around the whole assembly rather than ordering the trim alone and expecting a working lock.
2) What door thickness does the Baldwin Pasadena 6944 mortise entry trim fit?
It is specified for 1-3/4 inch doors, the standard thickness for an exterior residential entry door. Baldwin offers thin and thick door kits to take the Pasadena trim onto doors outside that range, so if your slab is thinner or thicker than 1-3/4 inches you will need the appropriate kit rather than the trim on its own.
3) Do I have to specify handing when ordering the Baldwin 6944 Pasadena entry trim?
Yes, handing is an ordering choice. The Pasadena entry trim is built left hand or right hand, and it is not reversible in the field. Stand outside the door: if the hinges are on your right, it is right hand. Getting this wrong on a mortise opening means the lever and the prep do not match the door.
4) What does single cylinder mean on the Baldwin Pasadena 6944, and can I get a double cylinder version?
Single cylinder means it is keyed from the outside only, with a thumbturn or interior release on the inside. Baldwin also builds the Pasadena trim in double cylinder (keyed both sides), full dummy, exterior only, and back to back, plus individual escutcheons cut for cylinder, cut for emergency release, cut for knob and cut for turn knob. Double cylinder is the choice where there is glass next to the door; check your local code before specifying it.
5) What keyway does the Baldwin Estate Pasadena 6944 use, and can I key it to my other doors?
It runs Baldwin's C keyway. Any other Baldwin hardware on the same C keyway can be keyed alike to it, which is how you get one key running the front, side and back doors. Keyed alike or keyed different is selected when you order. If the rest of your house is on a Schlage or Kwikset keyway, those will not key with this without a cylinder change.
6) What is a substitute for the Baldwin Estate 6944 Pasadena if the door is prepped for a tubular handleset instead of a mortise lock?
The Baldwin Estate 6944 Pasadena is entry trim for a full mortise application, and its door strike type is mortise, so it will not drop into a bored or tubular prep. For a tubular prep, the Sure-Loc Alta AT507 is a tubular handleset with an adjustable backset, and the Schlage Residential F60 Addison with Accent lever is a Grade 2 single cylinder keyed entry handleset that fits doors 1-3/8 inch to 1-3/4 inch thick. Both are complete handlesets rather than decorative trim over a separate mortise lock body.
7) Which mortise handleset can I use on the inactive leaf of a double door instead of the keyed Baldwin 6944 Pasadena?
The Baldwin Estate 6944 Pasadena is a single cylinder entry trim, keyed on the C-keyway, so it is not the part for a leaf that never latches. Emtek offers brass mortise entrance handlesets in dummy function in several designs: the 3002 Memphis, 3004 Hamilton, 3005 Melrose, and 3006 Manhattan. Baldwin also builds the Pasadena in a Full Dummy configuration if you want the same design on both leaves.
8) My entry door is 1-3/8 inch thick. Can I use the Baldwin 6944 Pasadena, and if not what fits?
The Baldwin Estate 6944 Pasadena trim is specified for a 1-3/4 inch door thickness. For a 1-3/8 inch door, the Pamex FS7P31 Lexington single cylinder handleset covers 1-3/8 inch to 1-3/4 inch, the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob covers 1-3/8 inch to 2 inch, and the Deltana 810871 Montego handleset covers 1-3/8 inch to 2 inch.
9) Can I use a different interior knob or lever with the Baldwin Pasadena 6944 trim?
Yes. The Pasadena is built to be customized: substitute any Baldwin interior knob or lever you like, or use the interior escutcheon plate on its own to build a passage, privacy, dummy or entry set. The trim is shown with the 5190 lever. That flexibility is the reason to spec this over a fixed-configuration handleset when the interior side needs to match other hardware in the house.
10) How big is the Baldwin Pasadena 6944 escutcheon plate?
The trim measures 3-7/20 x 19 inches. That 19 inch run is long for an entry escutcheon, so confirm the stile has room above and below the lock case and that the plate clears any glass lite, panel molding or a storm door closer bracket on the same face.
11) Is the Baldwin Estate Pasadena 6944 suitable for a commercial opening?
No. It is classified residential hardware in Baldwin's Estate Series, intended for houses and high-end residential entries. For a commercial door on a hardware schedule you want a Grade 1 or Grade 2 listed lock instead. Among the residential handlesets with a stated grade, the Schlage F60 Addison and the Master Lock HDLB Series single cylinder handleset are both Grade 2.
12) My door is thicker than 1-3/4 inches. Is there a handleset that fits without a special kit?
The Pasadena 6944 trim is specified at 1-3/4 inches and needs a thick door kit to go beyond that. If you would rather have a handleset that covers thicker slabs out of the box, the Weslock 1411 Traditionale Colonial single cylinder entry covers 1-3/4 to 2-1/4 inches, and the Yale Assure Lock touchscreen deadbolt with Ridgefield handleset also lists 1-3/4 to 2-1/4 inches.
13) Is there a keyless or electronic alternative to the Baldwin 6944 Pasadena single cylinder entry?
The Baldwin Estate 6944 Pasadena is keyed and uses a C-keyway cylinder. If you want keypad entry instead, the Yale Real Living BYRD226NRRX pairs a standalone touchscreen deadbolt with a Ridgefield handleset for doors 1-3/4 inch to 2-1/4 inch, and the BYRD226CBARX adds Wi-Fi and Bluetooth over the same thickness range. The Kwikset 815SCEHFL-CP913CNT San Clemente handleset carries a contemporary SmartCode keypad deadbolt with a Halifax lever interior for 1-3/4 inch doors.
14) What solid brass handlesets compare to the Baldwin Estate 6944 Pasadena for an upscale entry?
The Baldwin Estate 6944 Pasadena is an Estate Series entry trim with a modern textured design, offered in 112 Venetian Bronze and 190 Satin Black. Deltana offers solid brass entry handlesets in several designs: the 803871B Hanover, 815871 St. Ann, and 825871 Kingston. Those are complete handlesets in entry function, while the Pasadena is the decorative trim in a full mortise specification that takes a separate mortise lock body.
15) For a thicker entry door around 2 inches, what works in place of the Baldwin 6944 Pasadena?
The Baldwin Estate 6944 Pasadena is specified at 1-3/4 inch door thickness, though Baldwin offers thin and thick door kits to extend the range of conditions it can serve. If you would rather order a handleset rated at the thickness outright, the Weslock 1411 Traditionale Colonial with Eleganti knob is a single cylinder unit for 1-3/4 inch to 2-1/4 inch doors, and the Yale BYRD256 CBARX Assure with Ridgefield passage handleset covers 1-3/4 inch to 2-1/4 inch.
16) Is a non-keyed handleset like the Schlage JE285 a substitute for the Baldwin 6944 Pasadena?
No. The Baldwin Estate 6944 Pasadena is a keyed single cylinder entry trim on the C-keyway. The Schlage Residential JE285 Barcelona with Seville lever is a J Series Grade 2 handleset in non-keyed entry function for 1-3/8 inch to 1-3/4 inch doors, so it gives you the handleset appearance without a key cylinder. The Schlage JI18/19 is a different arrangement again: an interconnected passage lock with a separate keyed deadbolt above it, Grade 2, 1-3/8 inch to 1-3/4 inch.
17) If I only need the exterior half of an entry handleset, what are my options alongside the Baldwin 6944 Pasadena?
Baldwin offers the Pasadena in an Exterior Only configuration, and the interior side can be finished with any knob or lever of your choice or with the interior escutcheon plate to build passage, privacy, dummy or entry. Kwikset also sells exterior-only single cylinder keyed handlesets: the 687AMD Amador and 687BW Belleview, both Grade 3 for 1-3/4 inch doors, with the 687AMD SMC version supplied on the SC1 keyway.
18) I want the same Pasadena look on a non-locking door. What are my options?
Order the Pasadena trim in full dummy for a fixed, non-operating door, or build a passage or privacy set using the interior escutcheon plate with the knob or lever of your choice. If you want a dummy mortise handleset from another brand to pair with an existing opening, Emtek's brass mortise entrance handlesets in the Memphis, Hamilton, Melrose and Manhattan designs are all dummy function.
19) I need a handleset with a keyed thumbturn but no handing decision. Does the Baldwin 6944 Pasadena require handing?
The Baldwin Estate 6944 Pasadena entry trim is ordered by hand, in Left Hand or Right Hand, and Baldwin also builds it in Double Cylinder, Exterior Only and Back to Back configurations. If you want to avoid the handing call, the Sure-Loc Aspen AN507 and Madison MA507 are keyed entry handlesets with an adjustable backset, and the Sure-Loc Coral CR507 is a handleset in the same adjustable-backset family.
How fast can I get the Baldwin 6944112RENT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin 6944112RENT come with a warranty?
Absolutely. The Baldwin 6944112RENT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin 6944112RENT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin 6944112RENT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.