Baldwin L021 Lever Privacy w/ R017 Rose

The L021 privacy leverset drops into the standard 2-1/8 inch cross bore with a 1 inch edge bore, and it works at either the 2-3/8 or 2-3/4 inch backset, so it suits both the shallow residential prep and the deeper one without ordering a different part. That covers almost every existing interior door prep you will meet on a bedroom or bath.

No key and no cylinder. It is a non-keyed privacy function: thumbturn inside, emergency release outside, which is what belongs on a bedroom or bathroom door. If you need the door keyed, a privacy set is the wrong function, look at an entry or office function lever instead.

No handing to specify. The L021 lever is reversible, so one part number covers a left or right hand door and you set the lever direction at install. For a property manager buying several at once, that means one line item for the whole floor.

It is a residential lockset. For a bedroom, bath or interior door in a house or apartment unit, it is the right class of hardware. For a commercial corridor, a school or a hospital where you need a graded cylindrical lock, look at something like the Arrow MK02-TA privacy cylindrical lock or the Hager 2540 with the Withnell lever instead.

For a bed or bath door needing a non-keyed privacy lever, the Kwikset 300BRNL Breton privacy lever set is the nearest match by function: it is a Grade 3 privacy/bed/bath leverset fitting doors 1-3/8 inch to 1-3/4 inch, which brackets the 1.375 inch to 1.75 inch door range the Baldwin L021 covers. Both are non-keyed privacy sets, so the door prep and the interior turn-button operation are the same idea; the Breton uses a round rose rather than the square R017 rose profile.

The Baldwin L021 is a residential-duty privacy leverset. For a commercial opening in a school, hospital or office building, the Hager 2540 is a Grade 2 cylindrical lock with the Withnell lever covering 1-3/8 inch to 2 inch doors, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant, fire rated cylindrical lever for 1-3/4 inch to 2 inch doors. The Corbin is the one to spec when a fire rated opening or a heavy public-traffic restroom is involved.

A passage lever latches the door but has no privacy turn button, so nothing locks. On the residential side, the Kwikset 200BRNL Breton is a Grade 3 passage/hall/closet lever for 1-3/8 inch to 1-3/4 inch doors, and the Bravura Tampa is a Grade 2 passage leverset with square trim, which is the closer aesthetic match to the square R017 rose. Order the Baldwin L021 only where you actually want the bed and bath privacy lock.

The Baldwin L021 tops out at a 1.75 inch door. For a thicker slab, the Deltana 6201 Manchester and 6431 Linstead entry levers cover 1-3/8 inch to 2 inch, the Falcon K101 passage lever covers 1-3/8 inch to 2-1/4 inch, and the Lockey 2835 keyless lever covers 1 3/16 inch to 2 inch. Note the function difference: the Deltanas are entry and the Falcon is passage, so neither gives the bed and bath privacy turn the L021 provides.

Projection is 2.8 inches off the face of the door, with a 4.5 inch lever grip length. That matters on a door that swings back against a wall or on a narrow return where the lever could catch trim. Measure from the door face to the nearest obstruction and give yourself more than 2.8 inches.

Eight: Satin Brass (044), Polished Nickel (055), Satin Nickel (056), Graphite Nickel (076), Oil Rubbed Bronze (102), Venetian Bronze (112/11P), Satin Black (190) and Polished Chrome (260). If you are matching existing Baldwin hardware elsewhere in the building, order by that number, not by the name, since finish names repeat across brands.

The R017 rose is square, so it will not sit inside the ring left by a round rose, and any wear halo or paint line larger than the square plate stays visible. On a repaint it is a non-issue. On a door you are not refinishing, a round-rose lever such as the Bravura Miramar or Atlanta with round trim keeps the same footprint.

Everything needed to mount the lock on the door is in the box. It is a tubular lock, so you get the lever trim both sides, the rose, the latch and the fasteners as one set. Nothing extra to specify beyond the finish.

Privacy is the only function the L021.PRIV covers, so for the closet you want a passage lever in the same finish family. Among the levers ZenSupply carries, the Bravura Tampa with square trim is a square-rose passage lever, which keeps the rose shape consistent if you are running square trim through the space.

The Kwikset 300BRNL Breton privacy lever is the straightforward residential substitute, a Grade 3 privacy set covering 1-3/8 to 1-3/4 inch doors, the same thickness window the Baldwin handles. The difference is trim and construction, not function: both give you a bed and bath privacy lever on a standard bore.

Dummy levers are the common mix-up. The Callan Bentley Grade 2 dummy lever, the BEST 7KC single dummy trim, and the Emtek Cortina dummy pair are all fixed trim with no latch and no privacy button; they mount on inactive or closet doors for pull only. The Baldwin L021 is a privacy set with a working latch on a 2-3/8 inch backset and a 1 inch edge bore, so a dummy will not fill the same prep or secure a bathroom.

A privacy set like the Baldwin L021 is non-keyed by design. For a keyed opening, the Cal-Royal AG00 entrance lever uses a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset, matching the L021 backset, and covers 1-3/8 inch to 1-3/4 inch doors. For a commercial entry, the Hager 2525 is a Grade 2 cylindrical entry lock for 1-3/8 inch to 2 inch doors, and the Falcon B511CP6D is a Grade 2 entry/office lever.

Not a privacy set. The Dexter C1000 asylum function is a Grade 1 cylindrical lock for 1-3/8 inch to 2 inch doors, and the Arrow MK33-BD-CS is a heavy duty Grade 2 asylum/institution/utility lock with a conventional cylinder in the Schlage C keyway. Those give staff key control from both sides. The Baldwin L021 privacy lever is a residential bed and bath set and is not the right function for that opening.

It needs a 2-1/8 inch cross bore and projects 2.8 inches, which a narrow stile door usually cannot take without weakening the stile or fouling the glass stop. On a slab door at 1-3/8 to 1-3/4 inches thick it is fine. For anything narrow-stile, measure the stile against the 2-1/8 inch bore before you commit.

The Bravura Tampa passage leverset carries square trim, the same rose geometry as the square R017 rose on the Baldwin L021, so bedroom privacy and hall passage doors read consistently. If a round rose is preferred throughout instead, Bravura offers the Atlanta, Orlando and Miramar passage leversets with round trim, all Grade 2.

It is a different job. The Lockey 2835 is a mechanical pushbutton keyless lever with passage function and ADA compliance for doors 1 3/16 inch to 2 inch, the Lockey 1150 is a heavy duty mechanical keypad lever set with double combination and passage function for 1-1/8 inch to 2 inch doors, and the Delaney LP250 is a Grade 2 electronic keypad leverlock. Those control who enters by code; the Baldwin L021 gives the occupant a privacy turn on the inside of a bed or bath door, with a reversible lever so it serves either hand.