Baldwin Reserve 0425 Door Adju...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$40.00
$27.27
Baldwin Baldwin Reserve 0425 Door Adjustable Ball Catch (Fitted in Jamb) BAL-0425

Baldwin Reserve 0425 Door Adjustable Ball Catch (Fitted in Jamb)

(No reviews yet) Write a Review

Model: BAL-0425.044
From the Reserve Series Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$40.00
$27.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BALDWIN RESERVE 0425 DOOR ADJUSTABLE BALL CATCH OVERVIEW

KEY FEATURES

  • Adjustable Ball Catch is perfect for use on louvered, bi-folding, accordion, closet, and light to medium service doors.
  • 1" x 2.125"
  • Comes equipped with a dual adjustment ball bearing catch for perfect tension.
  • Baldwin Hardware has a rich tradition of high-quality, master craftsmanship, solid brass products. A difference you can both feel and see.

FEATURES

  • SIZE: Face Plate: 1 ������������������������������������������������������ × 2.125 ������������������������������������������������������ (25 × 54mm)
  • Bore: .875 ������������������������������������������������������ dia. × 1.25 ������������������������������������������������������ long (22 × 32mm)
  • 0425.xxx Strike: 1.06 ������������������������������������������������������ x 2.125 ������������������������������������������������������, Lip to Center: .56 ������������������������������������������������������
  • 0426.xxx Strike: 1.375 ������������������������������������������������������ x 2.125 ������������������������������������������������������, Lip to Center: .875 ������������������������������������������������������
  • FEATURES: Dual adjustment ball bearing catch of excellent design takes advantage of rolling ball action for perfect tension. Infinite adjustments for compensation of various door clearances, swelling, shrinking, drafts and weights. Recommended for use on louvered, bi-folding, accordion, closet and light to medium service doors.
  • PACKED: Includes wood screws
  • FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1861 BHMA DESIGNATION: D2801
  • NOTES: Not recommended for doors larger than 3.0’ x 6.8” x 1.75” thick.

RESOURCES & DOWNLOADS

Manufacturer Resources

Product Specs

Subcategory:
Door Latches and Catches
Product Group:
Door Trim and Accessories
Product Subgroup:
Parts and Accessories
Product Type:
Parts and Accessories
Commercial/Residential:
Residential
Collection:
Reserve Series
Product Model:
425
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Baldwin BAL-0425.044 – Frequently Asked Questions

1) Will a Baldwin 0425 ball catch hold a full-size entry door?
No. The Baldwin Reserve 0425 adjustable ball catch is rated for louvered, bi-folding, accordion, closet and light to medium service doors, and Baldwin specifically says not to use it on doors larger than 3.0' x 6.8" x 1.75" thick. For anything heavier or for an exterior opening, you need a latching device, not a ball catch.
2) Which strike comes with the Baldwin 0425 ball catch, and what is the lip-to-center?
The 0425 pairs with a strike measuring 1.06 x 2.125 inches with a .56 inch lip to center. Baldwin also lists a wider 0426 strike at 1.375 x 2.125 inches with .875 inch lip to center. Lip to center is what decides whether the strike reaches across your door stop and gap, so measure from the face of the door to the point the ball lands before you settle on one.
3) Is the Baldwin 0425 ball catch a commercial-duty part for a hospital or school corridor?
No. Baldwin classes the Reserve 0425 as residential, and it is built for light to medium service doors. For institutional corridor and traffic-door work, specify commercial-rated catches or a latching device instead. It is a reasonable choice for closet and millwork doors inside residential units of a multi-family or hospitality property.
4) Does the Baldwin 0425 ball catch mount in the door or in the jamb?
The catch body goes in the jamb and the strike plate mounts on the door. That is the reverse of the more common arrangement where the ball sits in the top edge of the door, so check which part your existing prep will take before ordering.
5) Can you adjust the tension on a Baldwin 0425 ball catch after the door is hung?
Yes. It uses a dual adjustment ball bearing catch with infinite adjustment, so you can dial the holding tension up or down on site to compensate for door clearance, seasonal swelling and shrinking, drafts, and door weight. That is what makes it workable across a run of closet doors that have not all settled the same way.
6) What finishes does the Baldwin Reserve 0425 ball catch come in?
Eight: 003 Polished Brass PVD, 044 Satin Brass PVD, 055 Polished Nickel PVD, 056 Lifetime PVD Satin Nickel, 112 Venetian Bronze, 151 Antique Nickel, 190 Satin Black, and 260 Polished Chrome. The PVD finishes are the ones to specify if you want the closet hardware to hold its color alongside Baldwin Reserve levers and hinges on the same opening.
7) Does the Baldwin 0425 ball catch meet a federal or BHMA designation for a spec submittal?
It carries Government Type 1861 and BHMA designation D2801, which is what a submittal reviewer looks for when a schedule calls out a ball catch by federal equivalent rather than by brand.
8) How do I order the Baldwin ball catch, model 425?
Order the Baldwin Reserve 0425 by finish code, which is the only choice on it. The three-digit code is appended to the model, so 0425.003 is polished brass PVD and 0425.190 is satin black. Handing does not apply, and the wood screws are included.
How fast can I get the Baldwin BAL-0425.044 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin BAL-0425.044 come with a warranty?
Absolutely. The Baldwin BAL-0425.044 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin BAL-0425.044?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Baldwin BAL-0425.044 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!