You may also like
BALDWIN RESERVE 0458 DOOR FLUSH PULL OVERVIEW
KEY FEATURES
- The flush Colonial design makes it ideal for closet doors or pocket doors, and is especially suited for an Early American interior.
- 1.5" x 3.5"
- Designed to be used as a sash lift or sliding door pull if pocket allows clearance.
- Baldwin Hardware has a rich tradition of high-quality, master craftsmanship, solid brass products. A difference you can both feel and see.
FEATURES
- SIZE: Base: 1.5 ������������������������������������������������������ × 3.5 ������������������������������������������������������ (38 × 89mm)
- THICKNESS OF FLANGE: .187” (5mm)
- FEATURES: Decorative flush pull designed to be used as a sash lift or sliding door pull if pocket allows clearance. Colonial design makes it suitable for Early American interiors. Extra heavy solid forged brass construction.
- NOTE: Pull has .25” projection
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Sliding Door Pulls
- Product Type:
- Flush Pulls
- Subcategory:
- Sliding Door Pulls
- Commercial/Residential:
- Residential
- Collection:
- Reserve Series
- Product Model:
- 458
- Product Category:
- Sliding Door and Barn Door Hardware
- Department:
- Door Hardware
Baldwin BAL-0458-10 – Frequently Asked Questions
1) Will a Baldwin 0458 flush pull work on a pocket door, or will it hit the frame?
It works on a pocket door only if the pocket has clearance for a .25 inch projection. Baldwin states the 0458 is designed as a sash lift or sliding door pull if the pocket allows that clearance. Measure the gap between the door face and the inside of the pocket wall before you commit. If the pocket is tight, you want a fully recessed cup pull with no proud pull element rather than this one.
2) What is a flush pull comparable to the Baldwin Reserve 0458 for a pocket door in a commercial opening?
The Baldwin Reserve 0458 is a 1.5 inch by 3.5 inch flush pull with a Colonial profile and a .187 inch flange thickness, and Baldwin describes it as a residential product. For a commercial opening where a decorative Colonial face is not the point, the Trimco 1060/1061 flush cup pulls and the Trimco 1111 large flush cup pulls are the equivalent flush-mortise part in a plain cup form. The Trimco 1111 is the larger of those two by series description, so it is the one to look at when the door needs a bigger hand target rather than a decorative face.
3) Is there a flush pull that installs without through-bolting or screw fasteners like the Baldwin 0458 rectangular pull?
Yes. The Trimco 1059 is a drive-in flush cup pull, meaning it is set into a bored recess rather than fastened through a mortised pocket the way a rectangular flanged pull such as the Baldwin Reserve 0458 is. The 0458 is a 1.5 inch by 3.5 inch rectangular pull with a .187 inch flange, so the two are not interchangeable in the same prep - the drive-in cup needs a round bore, the Baldwin needs a rectangular mortise.
4) What flush pull should be used instead of the Baldwin Reserve 0458 in a behavioral health or detention room?
The ABH 1911 series flush door pull is built with a ligature-resistant design, which is the deciding attribute in behavioral health, corrections, and other rooms specified for that risk. The Baldwin Reserve 0458 is a decorative Colonial flush pull that Baldwin lists as residential, so it is not the part for those openings even though both mount flush in the door face.
5) What finishes does the Baldwin Reserve 0458 come in?
Nine finishes: 003 Polished Brass PVD, 044 Satin Brass PVD, 055 Polished Nickel PVD, 102 Oil Rubbed Bronze, 112 Venetian Bronze, 150 Satin Nickel, 151 Antique Nickel, 190 Satin Black, and 260 Polished Chrome. The three PVD finishes are the ones that hold their color; Oil Rubbed Bronze and Venetian Bronze are living finishes that change with handling. If you are matching knobs and levers already installed in a house, the Baldwin finish number on those is the number to order here.
6) Can I use the Baldwin 0458 as a sash lift on a double hung window?
Yes, that is one of its two stated uses. Baldwin designs the 0458 as a sash lift or a sliding door pull. The 1.5 x 3.5 inch base mortises into the bottom rail of the sash, and the .25 inch projection gives you something to hook a finger under to lift. It is forged solid brass, so it takes the repeated pull of a sash without deforming the way a stamped pull can.
7) What is the difference between the Baldwin 0458 flush pull and a drive-in cup pull like the Trimco 1059?
Installation method, mostly. The 0458 is a mortised rectangular pull with a 1.5 x 3.5 inch base and a .187 inch flange that laps the mortise. The Trimco 1059 is a drive-in flush cup pull, which seats into a bored hole rather than a routed rectangle, so it is faster on a jobsite with a drill and no router. The Trimco 1060/1061 is the conventional mortised cup version. Pick the Baldwin when the finish and the Colonial profile are part of the interior; pick a drive-in cup when speed of install matters more than the look.
8) Do I need a pull on both sides of a closet or sliding door?
Order two 0458 pulls per door leaf if the door is accessed from both faces, since each pull mortises into one face only. On a bypass closet door reached from one side, one per leaf is enough. On a pocket door you also want a matching edge pull to draw the door out of the pocket, since the 0458 mounts on the face and cannot reach a door that has slid fully home.
9) Which flush pull gives you something to grip when a pocket door has to be pulled fully out of the wall?
The Trimco 1066/1067/1068 drop-ring flush pulls carry a ring that swings out of the recess so a hand can hook it, which is what a fully recessed pocket door needs. The Baldwin Reserve 0458 has no moving ring - it is a fixed cup with a .25 inch projection and a 1.5 inch by 3.5 inch face, so the grip is whatever depth the recess itself offers.
10) If a job needs one flush pull style across both decorative and back-of-house doors, how do the Baldwin 0458 and the Trimco cup pulls divide up?
The Baldwin Reserve 0458 is the decorative side of that split - a Colonial-design solid forged brass pull sold in nine finishes including 102 Oil Rubbed Bronze, 055 Polished Nickel PVD, and 190 Satin Black, so it matches trim on front-of-house closet and pocket doors. The Trimco 1060/1061 and Trimco 1111 cup pulls are plain flush cups, with the 1111 the larger size, and they handle the utility openings. Standardizing on a single part across both means accepting one look everywhere, so most specs run the Baldwin where it is seen and a cup pull where it is not.
11) I want a round flush pull instead of a rectangular one. What are my options?
The 0458 is rectangular, with a 1.5 x 3.5 inch base and a Colonial profile. For a round pull, the Orca Hardware flush pull is 2-1/8 inches in diameter, which bores with a hole saw instead of routing a rectangle. Trimco also does the 1066/1067/1068 drop-ring flush pulls if you want a ring that lies flat until you lift it, which gives more grip than a shallow recess on a heavy door.
How fast can I get the Baldwin BAL-0458-10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin BAL-0458-10 come with a warranty?
Absolutely. The Baldwin BAL-0458-10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin BAL-0458-10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin BAL-0458-10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.