You may also like
BALDWIN RESERVE 0465 DOOR EDGE PULL OVERVIEW
KEY FEATURES
- The Edge pull is a narrow design that’s easy to install under thin door conditions.
- 3.875" x 0.75"
- Intended for use on pocket door applications
- Baldwin Hardware has a rich tradition of high-quality, master craftsmanship, solid brass products. A difference you can both feel and see.
FEATURES
- FEATURES: Specially designed spring loaded Edge Pull returns lever flush with face plate. Narrow design eliminates installation problems on thin door conditions. Intended for use on pocket door applications.
- PACKED: Includes wood screws
- FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1861 BHMA DESIGNATION: D2801
- NOTES: Not recommended for doors larger than 3.0’ x 6’8” x 1.75” thick.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Edge Pulls
- Product Type:
- Edge Pulls
- Subcategory:
- Edge Pulls
- Commercial/Residential:
- Residential
- Collection:
- Reserve Series
- Product Model:
- 465
- Product Category:
- Sliding Door and Barn Door Hardware
- Department:
- Door Hardware
Baldwin BAL-0465.190 – Frequently Asked Questions
1) Is the Baldwin 0465 edge pull rated for a commercial opening?
Baldwin lists the Reserve 0465 as a residential product. For a commercial pocket or sliding door, an edge pull built for that duty is the better call, such as the ABH 18200 Series or 18300 Series solid round edge pulls, or the Trimco 1062 Series concealed edge pull.
2) What is the closest equivalent to the Baldwin 0465 edge pull from another brand?
The Emtek 2221 brass edge pull is the nearest match in size and material. The Baldwin Reserve 0465 measures 3.875 inches by 0.75 inches in solid brass, and the Emtek 2221 is a brass edge pull at 3/4 inch by 4 inches. Both cover the same narrow pocket door edge mortise, so a 0465 cutout takes the Emtek 2221 with minimal rework. The difference to plan for is the action: the 0465 uses a spring loaded lever that returns flush with the face plate, so if the buyer wants that self returning lever behavior specifically, the Baldwin is the one that states it.
3) Which edge pull should be used on a commercial pocket door instead of the Baldwin 0465?
The Baldwin Reserve 0465 is a residential grade edge pull and is not recommended for doors larger than 3 feet by 6 feet 8 inches by 1.75 inches thick. For a heavier or higher traffic opening, the Trimco 1062 Series concealed edge pull and the ABH 18200 Series solid round edge pull with bent edge design are the commercial alternatives in the same function. The ABH 18300 Series is the straight edge version of the same solid round pull, chosen by which way the pull face sits relative to the door edge.
4) Which edge pull matches a 3-7/8 inch by 3/4 inch mortise already cut in a pocket door?
Two products land on that opening. The Baldwin Reserve 0465 is 3.875 inches by 0.75 inches, which is the same 3-7/8 by 3/4 dimension, and the Trimco 1063 concealed edge pull is listed at 3/4 inch by 3-7/8 inch. A property manager replacing a failed pull in an existing prep can use either without recutting; the choice is whether the door needs a spring loaded lever, which the Baldwin 0465 provides, or a concealed recessed pull, which the Trimco 1063 provides.
5) What finishes does the Baldwin Reserve 0465 edge pull come in?
Eight finishes: 003 Polished Brass PVD, 044 Satin Brass PVD, 055 Polished Nickel PVD, 056 Lifetime PVD Satin Nickel, 112 Venetian Bronze, 151 Antique Nickel, 190 Satin Black, and 260 Polished Chrome. Four of those are PVD, which holds up better to handling than a plain lacquered finish, and because they carry the same Baldwin finish numbers used across the Reserve line, you can match the pull to the levers and hinges already on the other doors.
6) What is the difference between a spring loaded flush edge pull and a plain recessed cup pull?
A plain recessed cup gives you a finger hole you reach into. The Baldwin 0465 uses a spring loaded lever that you pull out to grab and that snaps back flush with the face plate on release, which is what lets the door close fully into the pocket or against the jamb. If you want the simpler recessed style instead, the Emtek 2221 brass edge pull and the Trimco 1063 concealed edge pull cover that approach.
7) Does the Baldwin 0465 edge pull meet a federal or BHMA designation for a spec submittal?
The 0465 is listed as the equivalent of Government Type 1861 and carries BHMA designation D2801. Those are the two references a submittal or hardware schedule usually calls for on a flush pull.
8) What is the difference between the ABH 18200 and ABH 18300 edge pulls?
They are the same solid round edge pull in two edge geometries: the ABH 18200 Series uses a bent edge design and the ABH 18300 Series uses a straight edge design. The bent edge gives a finger catch that stands proud of the door edge, while the straight edge sits in line with it. Both differ in action from the Baldwin Reserve 0465, which uses a spring loaded lever that returns flush with its face plate rather than a fixed round pull.
9) Is a concealed edge pull the same thing as the Baldwin 0465?
They are not interchangeable in operation. The Trimco 1062 Series and Trimco 1063 are concealed edge pulls, meaning the pull is recessed and hidden in the door edge. The Baldwin Reserve 0465 is a spring loaded edge pull whose lever returns flush with the face plate, so the lever is part of the visible face when at rest. If a locksmith or contractor is matching an existing concealed cup style pull, the Trimco 1063 at 3/4 inch by 3-7/8 inch is the closer size and style match to a 3.875 inch by 0.75 inch cutout than the Baldwin unit is a match to a concealed prep.
10) For a decorative finish match on a residential pocket door, which edge pull carries the most finish options?
The Baldwin Reserve 0465 comes in eight finishes: 003 Polished Brass PVD, 044 Satin Brass PVD, 055 Polished Nickel PVD, 056 Lifetime PVD Satin Nickel, 112 Venetian Bronze, 151 Antique Nickel, 190 Satin Black and 260 Polished Chrome, so it can be matched to Reserve Series levers and knobs elsewhere in the house. Among the peers, the Emtek 2221 is the other decorative brass edge pull in the same size class at 3/4 inch by 4 inches, while the ABH 18200 and 18300 solid round pulls are utility style edge pulls for a plainer opening.
11) Is the Baldwin 0465 solid brass?
Baldwin builds the Reserve line in solid brass, and the 0465 pull is part of that program. That matters on a spring loaded part, since the lever gets grabbed and pulled every cycle, and the PVD finishes offered on it are plated over that brass rather than over a pot metal casting.
How fast can I get the Baldwin BAL-0465.190 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin BAL-0465.190 come with a warranty?
Absolutely. The Baldwin BAL-0465.190 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin BAL-0465.190?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin BAL-0465.190 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.