Baldwin Reserve Federal Single Cylinder Keyed Entry Leverset with Traditional Rose

Yes. The Reserve Federal keyed entry leverset installs in the 2.125 inch standard door preparation, with a 1 inch edge bore for the latch and a backset of either 2-3/8 or 2-3/4 inches. If your door is already bored for a standard residential lockset, no new prep is needed.

The Federal entry lever covers both common backsets, 2-3/8 and 2-3/4 inches. Measure from the door edge to the center of the existing bore before ordering: 2-3/8 is the usual residential dimension and 2-3/4 shows up on heavier or thicker doors. Getting it wrong means the latch will not reach the lock body.

Yes. Keyed alike is an ordering option on the Federal entry leverset, as is keyed different, and there is a field to supply a key code if you are matching existing Baldwin cylinders. All Baldwin Reserve entry knobs and levers use the C-Keyway pin and tumbler cylinder, so they can be keyed together across the Reserve line.

The Federal keyed entry leverset is a residential product. For a commercial opening where a graded lockset is specified, look at heavy duty cylindrical entrance locks instead, such as the Hager 2525 Grade 2 commercial entry lever (1-3/8 to 2 inch doors) or the Dexter C1000 Grade 1 entry/office lever (1-3/8 to 1-3/4 inch doors). Property managers standardizing on a residential aesthetic for apartment unit doors are the right fit for the Baldwin.

The Baldwin Reserve Federal entry leverset is supplied with a C-Keyway pin and tumbler cylinder, so it keys into a Baldwin C system rather than a Schlage C one. For a Schlage C keyway, the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset for doors 1-3/8 inch to 1-3/4 inch, and the Cal-Royal AG03 classroom lever uses the same 6-pin Schlage C keyway on a 2-3/4 inch backset.

The Baldwin Reserve Federal keyed entry leverset is a single cylinder entry lock built for residential openings. Where the opening calls for a graded commercial lock, the Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle covering doors 1-3/8 inch to 2 inch, and the Falcon B511CP6D is a Grade 2 cylindrical lever with entry/office function. Both give you a stated ANSI grade for a spec submittal; the Federal gives you the Reserve Series trim styling with a C-Keyway cylinder.

The Baldwin Reserve Federal leverset is a keyed entry lock, so it is not the part for a hall or closet door. Non-keyed cylindrical levers for that opening include the Accentra 5301LN Augusta, a Grade 2 passage/closet lever in the 5300 Series, the Arrow GL01 Sierra passage lever, a Grade 2 non-keyed lock for doors 1-3/4 inch to 2 inch, and the Hager 2510 Withnell, a Grade 2 passage lever for doors 1-3/8 inch to 2 inch.

No - they lock differently. The Baldwin Reserve Federal is an entry function lock, where the inside lever always retracts the latch and the outside lever can be left unlocked. A storeroom lever such as the Cal-Royal AG05, a Grade 2 storeroom lockset with a deadlocking latchbolt, or the Hager 2580 Grade 2 storeroom lock with the Withnell lever, keeps the outside lever locked at all times and requires the key on every entry. A classroom function like the Cal-Royal AG03 or the Dexter C1000 Grade 1 classroom lever is keyed from the outside to lock and unlock the outside lever only.

Single cylinder means one key cylinder, on the outside face only. The inside lever operates without a key, so exiting is always a matter of turning the lever. It is an entry function lockset, locked from outside by key and secured for a front door, side door, or any opening that needs more than a passage or privacy set.

Three traditional rose shapes: Traditional Arch (TAR), Traditional Round (TRR), and Traditional Square (TSR). Each is offered in eight finishes, 003 Polished Brass PVD, 044 Satin Brass PVD, 055 Polished Nickel PVD, 112 Venetian Bronze, 150 Satin Nickel, 152 Matte Antique Nickel, 190 Satin Black, and 260 Polished Chrome. Pick the rose to match the other trim on the opening; the lever itself is the same Federal design across all three.

Yes. Split finish and split rose are both order options on the Federal entry leverset, so the exterior can carry one finish (say 112 Venetian Bronze to match exterior trim) while the interior carries another, and the rose shape can differ side to side. Specify the combination when ordering.

It will. The Federal lever is part of the Baldwin Reserve Series, and Reserve mixes knob and lever styles across the same platform, all using the C-Keyway cylinder on the keyed entry versions. That lets you run levers on the doors that need them and keep knobs elsewhere, on one key, in a matching finish.

A single cylinder keyed entry lever like the Baldwin Reserve Federal is the wrong function for a bath or bedroom, which wants a privacy lock with an inside turn and no key. The Kwikset 300BRNL RDT Breton is a Grade 3 privacy lever set for doors 1-3/8 inch to 1-3/4 inch, and the Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever covering 1-3/8 inch to 2 inch.

For a straightforward keyed entry opening, the Master Lock BC Series RL01 is a Grade 3 return style lever keyed entry lockset, the Callan Artino is a Grade 3 entrance leverset, and the Arrow HK11-BB is a turn-pushbutton entrance cylindrical lock with a ball knob and conventional cylinder for doors 1-3/8 inch to 1-3/4 inch. The Baldwin Reserve Federal covers the same entry function with Reserve Series trim in eight finishes and three traditional rose shapes.

Keyless lever locks cover the same entry opening without a cylinder. The Delaney LP250 is a Grade 2 electronic keypad leverlock, the Emtek Classic keypad leverset is a decorative keypad lever, and the Lockey 2835 is a mechanical pushbutton keyless lever lock with ADA compliance for doors 1-3/16 inch to 2 inch. The Baldwin Reserve Federal instead takes a C-Keyway pin and tumbler cylinder and can be ordered keyed alike or keyed different.

A dummy lever is a surface-mounted pull with no latch, so it does not substitute for the keyed Baldwin Reserve Federal, which fits a 2-1/8 inch standard bore with a 2-3/8 or 2-3/4 inch backset latch. For the inactive leaf of a pair or a false door, the Emtek Arts and Crafts dummy pair and the Emtek Cortina dummy pair are decorative dummy leversets, and the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim.

The Baldwin Reserve Federal is a single cylinder keyed entry leverset only, so a deadbolt is a separate order alongside it. If you want the lock and deadbolt supplied together, the Callan Bennett is a Grade 3 entrance leverset with a deadbolt combo.

For an opening where a fire rating is called out, the Corbin Russwin CL3110 is a Grade 1 vandal resistant cylindrical lever in passage/closet function with a fire rating for doors 1-3/4 inch to 2 inch, and the Falcon K101 is a Grade 1 heavy duty fire rated passage lever covering 1-3/8 inch to 2-1/4 inch. Both are non-keyed passage function, so pair them with the correct keyed lock where the opening also needs to lock; the Baldwin Reserve Federal is a residential entry lever.

The Federal here is the keyed entry function only. For interior doors in a matching aesthetic, Emtek offers Classic and Arts and Crafts dummy lever pairs, and Bravura's Atlanta, Orlando, and Tampa Grade 2 passage leversets cover round and square trim. Callan's Asheville is a Grade 3 passage lever if a lighter duty set suits the room.

The Federal leverset is key operated with a pin and tumbler cylinder, so there is no code entry on it. If you want keyless, Lockey's 2835 mechanical pushbutton lever lock fits doors 1 3/16 to 2 inches, the Lockey 1150 heavy duty keypad lever covers 1-1/8 to 2 inches, and Emtek's Classic Keypad Leverset is an electronic option in a traditional trim style.