You may also like
BARE TUB RNG TERM 90 DEG SILVER PLT
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Butt Splice
- Wire Size:
- 9-7 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Silver
- Product Material:
- Copper
Sta-Kon DD102SP – Frequently Asked Questions
1) What wire sizes does the Sta-Kon DD102SP terminal accept?
The DD102SP is sized for 9 to 7 AWG conductors. If you are terminating anything outside that range, you need a different barrel size; crimping a 10 AWG or smaller conductor in this barrel will not give you a reliable mechanical hold.
2) Is the Sta-Kon DD102SP insulated, and do I need to sleeve it after crimping?
It is a bare, non-insulated terminal. There is no sleeve or nylon body on the barrel, so if the connection needs insulation for your application you will have to add heat shrink or tape over the crimp yourself.
3) What is the DD102SP made of and what is the silver plating for?
The body is copper with a silver plated finish, which is why it reads as silver in color. Silver plating on a copper barrel is used where low contact resistance matters and where a tin plate would not hold up, typically higher temperature or higher current terminations.
4) Why would I pick a 90 degree ring terminal instead of a straight one?
The DD102SP has the ring tongue set at 90 degrees to the wire barrel, so the conductor runs parallel to the mounting surface instead of straight into the stud. That is what you want on a crowded terminal block or bus bar where a flag orientation keeps the wire from having to bend hard right at the crimp. A straight ring terminal is the simpler choice when the wire approaches the stud head-on.
5) Can the Sta-Kon DD102SP be crimped with ordinary pliers?
No. A bare copper barrel terminal in the 9 to 7 AWG range needs a proper crimping tool with the correct die for that barrel size. Pliers deform the barrel unevenly and leave a joint that loosens under vibration and heats up under load.
6) Where is the Sta-Kon DD102SP manufactured?
Country of origin on the DD102SP is Mexico. That is the detail procurement and government buyers usually need for domestic preference or trade documentation on an order.
How fast can I get the Sta-Kon DD102SP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon DD102SP come with a warranty?
Absolutely. The Sta-Kon DD102SP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon DD102SP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon DD102SP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.