BEA 10EMS475X Panther Family 4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$221.37
$152.04
BEA 10EMS475X Panther Family 4.75" Square Wireless Push Plate with 433 MHz Technology

BEA 10EMS475X Panther Family 4.75" Square Wireless Push Plate with 433 MHz Technology

(No reviews yet) Write a Review

Model: 10EMS4751
Selected Push Plate Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$221.37
$152.04
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEA 10EMS475X Panther Family 4.75" Square Wireless Push Plate with 433 MHz Technology

Professional Wireless Access Control Solution

The BEA 10EMS475X Panther Family wireless push plate combines 433 MHz radio frequency technology with a 4.75" square design for versatile access control applications. This weather-rated IP65 push plate eliminates wiring requirements through integrated wireless transmission, offering enhanced installation flexibility in both indoor and outdoor environments where traditional hardwired solutions are impractical.

Professional Features & Benefits

  • Wireless Technology Integration: 433 MHz radio frequency transmission eliminates the need to run wires from the push plate, reducing installation time and complexity.
  • Weather-Resistant Construction: IP65 rated housing creates a weather resistant barrier enabling outdoor mounting and wash-down applications.
  • ADA Compliance: Enhances accessibility with ADA-compliant design available in a variety of popular faceplate graphic options.
  • Vandal-Resistant Design: Concealed fasteners minimize vandalism and unauthorized tampering.
  • Integrated Mounting System: Includes integrated wireless transmitter and mounting box for streamlined installation without additional mounting hardware.
  • Flexible Installation Options: Offers greater mounting flexibility in areas where hardwired push plates cannot be mounted due to structural or wiring limitations.
  • Square Profile Design: 4.75" square configuration provides professional appearance suitable for commercial applications.

Technical Specifications

  • Transmitter Frequency: 433 MHz or 900 MHz
  • Power (433 MHz): (1) 12 V Type A23
  • Power (900 MHz): (2) CR2032
  • Faceplate Material: 16 Gauge, 304 2B Stainless Steel
  • Housing Material: ABS Plastic
  • Mounting Options: Surface or bollard mount
  • Dimensions (6 Inch Round): 6.33 in (dia.) x 1.45 in (D)
  • Dimensions (4.75 Inch Round): 5.12 in (dia.) x 1.42 in (D)
  • Dimensions (4.75 Inch Square): 5.12 in (W) x 5.12 in (H) x 1.42 in (D)
  • Weight (6 Inch Round): 1.2 lbs
  • Weight (4.75 Inch Round): 1.14 lbs
  • Weight (4.75 Inch Square): 1.04 lbs
  • Degree of Protection: NEMA 4 / IP65
  • Certification: FCC IC Part 15 Approved

Installation & Operation

  1. Select appropriate mounting location ensuring adequate clearance for wireless signal transmission to the corresponding receiver unit.
  2. Mount the integrated mounting box using appropriate fasteners for the mounting surface material.
  3. Configure the wireless transmitter frequency settings to match the corresponding wireless receiver (sold separately).
  4. Test wireless signal transmission range and reliability from the installation location to the receiver.
  5. Verify push plate operation and wireless communication with the access control system.
  6. Complete final inspection and document wireless settings. Refer to manufacturer documentation for complete programming instructions and troubleshooting.

Professional Applications

  • Commercial Building Access Control Systems
  • Healthcare Facility Automatic Door Operation
  • Educational Institution Accessibility Compliance
  • Retail Establishment Entry Systems
  • Industrial Facility Personnel Access
  • Outdoor Installation Requirements
  • Wash-Down Environment Applications

Why Choose BEA Quality?

BEA Panther Family wireless push plates deliver professional-grade reliability with IP65 weather-resistant construction and vandal-resistant design features. The integrated 433 MHz wireless technology eliminates installation complexity while maintaining dependable performance in demanding commercial environments. Engineered for accessibility compliance and flexible mounting applications where traditional wired solutions are impractical.

Product Specs

Product Type:
Square Push Plates
Series:
Panther Family
Subcategory:
Parts and Accessories
Commercial/Residential:
Commercial
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Weather-Resistant:
Yes
Transmitter Frequency:
433 MHz
Product Size:
4-3/4"
Product Category:
Electronic Access Control
Department:
Door Hardware

BEA 10EMS4751 – Frequently Asked Questions

1) Can a BEA Panther push plate be installed where there is no way to run wire back to the door operator?
That's the reason the 10EMS475X exists. The 4.75 inch square Panther plate has the wireless transmitter and mounting box built into it, so it sends the actuation signal over 433 MHz radio instead of a wire run. It's the answer for a wing wall, a glass vestibule, a bollard in the middle of a walkway, or any spot where a hardwired plate can't be mounted because of structure or conduit access. You still need a matching wireless receiver at the operator; that receiver is a separate order.
2) Will the 433 MHz Panther push plate talk to a 900 MHz receiver?
No. The 10EMS475X transmits on 433 MHz, and the transmitter and receiver have to be on the same frequency. If the receiver already at the operator is a 900 MHz unit, this plate won't trigger it, and there is no field conversion between the two. Match the band before you order: a 900 MHz opening needs the 900 MHz version of the plate. The battery differs too, which is a quick way to tell them apart in the field. The 433 MHz plate runs on a single 12 V Type A23 cell; the 900 MHz runs on two CR2032 coin cells.
3) Can a BEA wireless push plate be mounted outdoors or in an area that gets hosed down?
Yes. The Panther plate carries a NEMA 4 / IP65 degree of protection, which is what lets it go on an exterior wall or a bollard and survive wash-down. The faceplate is 16 gauge 304 2B stainless, and the housing behind it is ABS plastic, so the wet-side components hold up in a kitchen, a garage entry, a loading area, or a healthcare corridor that gets washed.
4) Square or round push plate for an automatic door actuator, and does it change anything functionally?
Functionally, nothing. The Panther family runs the same guts in three shells: a 4.75 inch square at 5.12 x 5.12 x 1.42 in, a 4.75 inch round at 5.12 in dia. x 1.42 in D, and a 6 inch round at 6.33 in dia. x 1.45 in D. Pick on the opening. The square reads as the more commercial look and lines up cleanly with rectangular trim, mullions, and tile joints. The round is what most people already have on healthcare and institutional openings, so it matches an existing fleet. The 6 inch round is the one to specify when the plate sits at the end of a long approach and needs to be seen from a distance.
5) Can a BEA Panther wireless push plate go on a bollard instead of a wall?
Bollard mounting is one of the two supported options along with surface mounting, and the wireless transmitter is what makes it practical. A bollard in an open walkway is the classic place where you can't get conduit to the plate, and going wireless removes the trench or the core drill. Keep line of sight and distance to the receiver in mind when you set the bollard, and range-test from that exact position before you pour or anchor it.
6) How is a wireless push plate powered, and what battery does the 433 MHz BEA Panther take?
There's no power to run to it. The 433 MHz Panther plate is battery powered off a single 12 V Type A23 cell, which is what lets the plate be fully wire-free. Stock a few A23 cells if you're standardizing a building on these; it's the one consumable in the assembly. The 900 MHz version instead uses two CR2032 coin cells, so don't assume battery stock carries across if you run both bands on a site.
7) What else do I need to order to make a BEA wireless push plate operate an automatic door?
The plate itself arrives complete: transmitter and mounting box are integrated, so no separate back box or mounting kit is needed for the plate side. What is not included is the wireless receiver at the door operator, which is ordered separately and has to be set to the same 433 MHz band as the plate. Setup is a matter of matching the frequency settings between the two, then range-testing from the mounting position back to the receiver before final fastening.
8) Are BEA Panther push plates tamper resistant enough for a school or a public entrance?
The Panther uses concealed fasteners, so there's no exposed screw head to attack with a driver and the faceplate can't be popped off casually. Combined with the 16 gauge 304 stainless face, it holds up in a school corridor, a transit entrance, or a retail door where the plate gets abused daily. Note that the transmitter and its battery sit inside the same housing, so the concealed fastening protects the electronics too, not just the cosmetic face.
9) Is the 433 MHz radio in the BEA push plate approved for use in the US?
The Panther transmitter is FCC IC Part 15 approved, covering both the US and Canadian side. That's the approval a facility or an inspector will ask about on an unlicensed 433 MHz device, and it means the plate can be deployed without any site radio licensing.
How fast can I get the BEA 10EMS4751 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA 10EMS4751 come with a warranty?
Absolutely. The BEA 10EMS4751 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA 10EMS4751?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEA 10EMS4751 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!