BEA 10TD900INDHH3 NEMA 4 Rated 3-Button 900 MHz Handheld Digital Transmitter

BEA 10TD900INDHH3 NEMA 4 Rated 3-Button 900 MHz Handheld Digital Transmitter

Professional Wireless Door Control Solution

The BEA 10TD900INDHH3 is a NEMA 4 rated 3-button handheld digital transmitter operating on 900 MHz frequency for wireless activation of automatic door controls. This industrial-grade transmitter features FCC Part 15 certification for federal compliance and provides enhanced line-of-sight transmission distance with superior obstacle penetration through walls, partitions, doors, and low-emissivity glass. The device offers extended hold and toggle/pulse functionality with frequency hopping technology for consistent transmission in environments with multiple 900 MHz devices.

Professional Features & Benefits

• 900 MHz Wireless Technology: Provides greater line-of-sight transmission distance than legacy wireless frequencies with superior obstacle penetration capabilities.
• NEMA 4 Rating: Industrial-grade protection suitable for demanding environmental conditions and outdoor applications.
• 3-Button Configuration: Multiple activation options for versatile door control applications and sequencing requirements.
• Frequency Hopping Technology: Ensures consistent transmission performance in areas with other 900 MHz devices and radio interference.
• Extended Hold Functionality: Integrated extended hold and toggle/pulse functionality accommodates various application needs and door timing requirements.
• FCC Part 15 Certification: Ensures proper compliance with federal radio frequency regulations for commercial installations.
• Learn Mode Options: Delay and no-delay learn modes provide either instant or delayed activation for proper door sequencing control.
• Accessibility Enhancement: Provides wireless activation means for individuals with limited mobility or disabilities, improving building accessibility compliance.

Technical Specifications

• Frequency: 908 - 918 MHz (frequency hopping)
• Emitted Radio Power: -25 dBm (TX)
• Power Consumption RD900: 40 mA
• Power Consumption TD900HHx: 30 mA
• Power Consumption TD900PB: 30 mA
• Power Consumption TD900TR: 22 mA
• Power Consumption TD900INDHHx: 13 mA
• Supply Voltage: 12 - 24 VAC / VDC
• Contact Rating: 1.0 A @ 30 VDC | 0.5 A @ 125 VAC | 0.3 A @ 60 VDC
• Temperature Range: 14 deg. F - 131 deg. F (-10 deg. C - 55 deg. C)
• Programmable Units Per Receiver: 75
• LEDs: Red: Receiver learn | Blue: Relay activation | Tri-color: Signal strength
• Dimensions RD900: 2.5 in (W) x 0.75 in (H) x 2.0 in (D)
• Dimensions TD900HHx: 2.75 in (W) x 0.56 in (H) x 1.38 in (D)
• Dimensions TD900PB: 1.75 in (W) x 0.3 in (H) x 1.0 in (D)
• Dimensions TD900TR: 1.72 in (W) x 0.32 in (H) x 1.06 in (D)
• Dimensions TD900INDHHx: 1.5 in (W) x 0.5 in (H) x 3.0 in (D)
• Certification: FCC, IC
• Degree of Protection TD900INDHHx: NEMA 4 / IP65

Installation & Operation

1. Verify receiver compatibility with 900 MHz frequency and confirm power supply requirements for the connected door control system.
2. Disconnect power to the door control system before beginning installation and follow all applicable electrical codes and safety procedures.
3. Mount the receiver unit in the specified location ensuring adequate clearance for antenna positioning and signal reception.
4. Route and connect wiring according to manufacturer wiring diagrams using appropriate wire gauge and connectors for the door control application.
5. Configure operational settings including learn mode selection (delay or no-delay) and extended hold/toggle functionality per application requirements.
6. Restore power and test all functions including normal operation, button response, and integration with the automatic door system.
7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

• Commercial Building Automatic Door Systems
• Healthcare Facility Accessibility Solutions
• Industrial Facility Access Control
• Retail Establishment Entry Systems
• Educational Institution Door Automation
• Multi-Tenant Residential Access Points
• Government and Municipal Building Entry

Why Choose BEA Quality?

BEA 900 MHz wireless transmitters deliver professional-grade reliability with NEMA 4 rated construction and FCC Part 15 certification for demanding commercial applications. The frequency hopping technology and extended transmission range ensure dependable performance in challenging RF environments. Engineered for accessibility compliance and industrial durability where consistent wireless door control activation is essential.