BEA 45S-900 ADA Wireless Push ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$435.54
$300.58
BEA 45S-900 Wireless Push Plate Kit — complete package contents shown: two PBS451 4.5" square stainless push plates with ADA wheelchair symbol, two 10BOX45SQSM surface mount boxes, two 10TD900PB 900 MHz transmitters, and one 10RD900 900 MHz receiver

BEA 45S-900 ADA Wireless Push Plate Package, 900 MHz, Complete Kit with Transmitters, Receiver & Surface Mount Boxes

(1 review) Write a Review

Model: PUSH PLATE 45S-900

In Stock (leaves warehouse same day if ordered before 3pm ET)

$435.54
$300.58
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEA 45S-900 Wireless Push Plate Package, 900 MHz

The BEA 45S-900 is a complete wireless push plate kit for commercial automatic door activation. The package ships with every component needed for a two-plate installation: two PBS451 4-1/2" x 4-1/2" square stainless push plates, two 10BOX45SQSM surface mount boxes, two 10TD900PB 900 MHz transmitters, and one 10RD900 900 MHz receiver. No hardwiring between the push plates and the door operator is required.

Package Contents

  • (2) PBS451 square push plates, 4-1/2" x 4-1/2", 16-gauge 304 2B stainless steel faceplate, ABS plastic housing, with "PUSH TO OPEN" text and ADA wheelchair symbol
  • (2) 10BOX45SQSM surface mount boxes for wall installation
  • (2) 10TD900PB 900 MHz wireless transmitters, powered by (2) CR2032 batteries each
  • (1) 10RD900 900 MHz wireless receiver

Technical Specifications

  • Wireless Frequency: 900 MHz
  • Transmitter Power: (2) CR2032 per transmitter
  • Faceplate Material: 16-gauge 304 2B stainless steel
  • Housing Material: ABS plastic
  • Push Plate Size: 4-1/2" x 4-1/2" square
  • Mounting: Surface mount (boxes included)
  • Degree of Protection: NEMA 4 / IP65
  • Certification: FCC IC Part 15 Approved
  • ADA Compliant: Yes

Typical Applications

  • Commercial building automatic door systems
  • Healthcare and institutional facility entrances
  • ADA compliance retrofits at high-traffic doors
  • Educational and retail entry points requiring touchless activation

Manufacturer Resources

BEA Product Catalog

Product Specs

Product Type:
Push Plate Package
Series:
PUSH PLATE 45S-900
Subcategory:
Parts and Accessories
Commercial/Residential:
Commercial
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Category:
Electronic Access Control
Department:
Door Hardware

BEA PUSH PLATE 45S-900 – Frequently Asked Questions

1) Does the BEA 45S-900 push plate kit need wiring run from the plates back to the door operator?
No wiring between the plates and the operator. The 45S-900 is a 900 MHz wireless kit: each PBS451 plate sits on a 10TD900PB transmitter powered by two CR2032 batteries, and the single 10RD900 receiver is what ties into the operator. That is the whole reason to pick this over a hardwired plate, retrofitting an existing opening where you would otherwise be cutting into finished wall or coring a jamb to pull low voltage across the door.
2) How many push plates come in the BEA 45S-900 package, and is one enough for a single door?
Two plates ship in the kit. You get two PBS451 4-1/2 inch square stainless plates, two 10BOX45SQSM surface mount boxes, two 10TD900PB transmitters, and one 10RD900 receiver. That is the standard two-plate layout for one automatic opening, one actuator on the approach side and one on the egress side, both talking to the same receiver. If you only need one plate on a door, you will have a spare plate, box, and transmitter left over.
3) Can BEA 45S-900 push plates be mounted on a wall with no back box cut into it?
Yes, and that is how the kit is built to go in. The two 10BOX45SQSM surface mount boxes are included, so the 4-1/2 inch square plates mount on the wall face without cutting in a recessed box. Combined with the wireless transmitters, the install is a surface box, an anchor into the wall, and nothing pulled through the substrate, which is what makes this workable on block, tile, or glass-adjacent surfaces where a flush box is not an option.
4) Is the BEA 45S-900 push plate ADA compliant for an accessible entrance?
ADA compliant, and the faceplate carries the wheelchair symbol along with PUSH TO OPEN text. That is the actuator itself; the accessible entrance still depends on how it is mounted and on the operator behind it, but the plate is the compliant part of the assembly. This is the usual specification for healthcare, education, and institutional entrances being brought up to accessible standards.
5) Will a BEA 900 MHz wireless push plate hold up mounted outside in the weather?
The 45S-900 plates carry a NEMA 4 / IP65 degree of protection, so they are rated against dust and low pressure water jets from any direction, which covers a normally exposed exterior entrance. The faceplate is 16-gauge 304 2B stainless over an ABS plastic housing, so the exposed metal is corrosion resistant rather than painted steel.
6) Does the BEA 45S-900 package include the door operator itself?
No. The 45S-900 is the activation side only: two push plates, two surface boxes, two transmitters, and one receiver. The automatic operator on the door is a separate purchase, and the 10RD900 receiver is what connects to it. Buyers replacing worn out actuators on an existing automatic door need only this kit; a new automatic opening needs the operator specified alongside it.
7) Should I buy the 900 MHz BEA push plate kit or the 433 MHz version?
The 45S-900 is the 900 MHz kit throughout: 10TD900PB transmitters and a 10RD900 receiver. BEA builds its wireless actuators in both 433 MHz and 900 MHz, and the two do not talk to each other, so the deciding question is what is already installed. If a receiver is already on the operator, match its frequency. If it is a clean install, the whole kit is matched out of the box and there is nothing to cross reference.
8) What powers the BEA wireless push plates, and do they need power run to the wall?
Each 10TD900PB transmitter runs on two CR2032 coin cells, so no power is pulled to the plate location at all. Only the 10RD900 receiver sits at the operator. Worth planning for on a fleet of doors: batteries are a maintenance item, so a property manager standardizing on wireless actuators across a building is trading conduit and wire for a periodic cell change.
9) What size opening in the wall does a BEA PBS451 push plate cover?
The PBS451 is a 4-1/2 by 4-1/2 inch square plate. That is the compact square actuator rather than the tall 4-3/4 by 4-3/4 or the large rectangular styles, so if you are replacing an older actuator, check that the existing plate is not larger than 4-1/2 inches square, or you will be looking at an unpainted outline on the wall. With the surface mount box included, it lands on the wall face rather than needing a matching cutout.
10) How do I order the BEA wireless push plate kit, and what is the part number?
Order it as BEA 45S-900. It is a single configured package, so there are no suffixes, finishes, or handing to specify, everything in the two plate wireless bundle is fixed. The individual components carry their own numbers (PBS451 plate, 10BOX45SQSM box, 10TD900PB transmitter, 10RD900 receiver) if you later need to replace one piece rather than the whole kit.
How fast can I get the BEA PUSH PLATE 45S-900 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA PUSH PLATE 45S-900 come with a warranty?
Absolutely. The BEA PUSH PLATE 45S-900 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA PUSH PLATE 45S-900?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEA PUSH PLATE 45S-900 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    Great kit for an upgrade

    Posted by Ken on Jul 3rd 2026

    Live the BEA stuff. Always performs and super easy to program. Thanks Zen for carrying the BEA products .

!