Bell 5173-2 1-Gang Blank Weath...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.50
Bell 5173-2 1-Gang Blank Weatherproof Cover, Vertical/Horizontal Mount, Bronze Aluminum

Bell 5173-2 1-Gang Blank Weatherproof Cover, Vertical/Horizontal Mount, Bronze Aluminum

(No reviews yet) Write a Review

Model: 5173-2

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bell 5173-2 1-Gang Blank Weatherproof Cover, Vertical/Horizontal Mount, Bronze Aluminum

The Bell 5173-2 is a 1-Gang weatherproof cover engineered to protect outdoor electrical boxes that have no device installed. Machined from durable aluminum with a metallic bronze finish, this blank/flat cover mounts in either vertical or horizontal orientation, giving electricians flexibility when finishing exterior device boxes. The low-profile design measures just 0.28 in in depth, so it sits flush against the box for a clean, weather-tight appearance. Backed by a UL Listing, the 5173-2 delivers dependable protection against moisture, dust, and debris intrusion in outdoor and wet-location settings.

Key Features

  • 1-Gang Compatibility: Sized to fit standard 1-Gang weatherproof device boxes for single-device or blank applications.
  • Durable Construction: Aluminum, metallic body resists corrosion and holds up to repeated outdoor exposure.
  • Blank/Flat Cover Type: Seals an unused weatherproof box opening, keeping the wiring compartment sealed from the elements.
  • Vertical or Horizontal Mounting: Device-mount design installs in either orientation to match the box layout.
  • Bronze Finish: Metallic bronze color coordinates with common exterior fixtures, siding, and trim.
  • Low-Profile Depth: A compact 0.28 in depth keeps the cover flush-mounted and unobtrusive.

Certifications & Compliance

  • UL Listed

Technical Specifications

  • Product Type: Weatherproof Covers
  • Product Material: Aluminum
  • Product Color: Bronze
  • Product Depth: 0.28 in
  • Construction: Metallic
  • Box Type: 1-Gang
  • Cover Type: Blank/Flat
  • Mounting Method: Vertical; Device Mount
  • Certified Listed: UL Listed

Typical Applications

  • Outdoor Receptacle and Switch Box Protection
  • Residential and Commercial Exterior Wiring
  • Sealing Unused Weatherproof Device Boxes
  • Wet and Damp Location Installations
  • New Construction and Renovation Projects

Why Bell?

Bell weatherproof covers combine rugged aluminum construction with a UL Listing, giving electrical contractors and homeowners confidence in outdoor code compliance. The 5173-2's metallic bronze finish and blank cover design provide reliable, weather-tight protection for unused 1-Gang boxes across residential and commercial exteriors. Choose Bell for durable, dependable electrical accessories built for lasting outdoor performance.

Product Specs

list_batch:
BELL-20260916
Product Type:
Weatherproof Blank Cover
Product Material:
Aluminum
Product Color:
Bronze
Product Depth:
0.28 in
Construction:
Metallic
Box Type:
1-Gang
Cover Type:
Blank/Flat
Certified Listed:
UL Listed
Mounting Method:
Vertical
Mounting Method:
Device Mount
Department:
Electrical
Product Subgroup:
Weatherproof Covers
Product Group:
Wiring Devices

Bell 5173-2 – Frequently Asked Questions

1) Will the Bell 5173-2 fit a standard 1-gang weatherproof outlet box?
Yes. The 5173-2 is sized for standard 1-gang weatherproof device boxes, and it mounts with the box's device screws rather than lid screws, so it lands on the same pattern a receptacle or switch plate would use. It is a blank cover, so it closes the opening off completely instead of carrying a device.
2) Can I use the Bell 5173-2 blank cover on a box that still has a receptacle in it?
No. A blank/flat cover has no opening, so it is for boxes with no device installed, such as an abandoned or future-use outdoor box you need sealed against moisture and dust. If there is a receptacle or switch in the box, you need a device cover or an in-use (while-in-use) cover instead.
3) Is the Bell 5173-2 approved for wet locations outdoors?
The 5173-2 is UL Listed and built as a weatherproof cover for outdoor and wet-location device boxes. Since it is a blank cover with no device penetration, the seal is a simple one: the aluminum plate closes the box face against rain, dust, and debris. For inspection purposes the listing is UL; no other agency mark is carried.
4) Does the 5173-2 have to be installed with the box vertical, or can the box run horizontal?
Either. The cover mounts vertically or horizontally, so the orientation of the box on the wall doesn't drive the order. That matters on siding runs and soffits where boxes get set whichever way the framing allowed.
5) Is the Bell 5173-2 metal or plastic, and will it corrode on a coastal building?
It is aluminum with a metallic construction and a bronze finish, not plastic. Aluminum resists corrosion in repeated outdoor exposure, which is why it is the common choice for exterior box covers over painted steel. Note that being metallic, the cover is part of the grounded metal enclosure assembly when used on a metal box.
6) What part number do I order for the bronze 1-gang Bell blank weatherproof cover?
Order Bell 5173-2. That is the manufacturer part number for the 1-gang blank weatherproof cover in bronze aluminum; it is a single configuration, so there is no finish or size suffix to specify.
7) I'm standardizing outdoor covers across a property. Is the 5173-2 the right one for boxes I'm decommissioning?
Yes, that is exactly its job. When a fixture or receptacle comes out and the box stays in the wall, the 5173-2 caps the 1-gang opening and keeps the wiring compartment sealed from weather. Bronze coordinates with common exterior fixtures and trim, so a run of decommissioned boxes across a building looks intentional rather than patched.
8) Will a Bell 5173-2 cover stick out past my siding or trim?
Barely. Depth is 0.28 in, so the plate sits close to flush on the box face. Combined with the bronze finish it reads as trim rather than hardware on darker siding, brick, and stained wood.
How fast can I get the Bell 5173-2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bell 5173-2 come with a warranty?
Absolutely. The Bell 5173-2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bell 5173-2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bell 5173-2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!