You may also like
Metallics SDS-Plus Hammer Drill Bit 3/16" x 4-1/2" Professional Masonry Drilling Tool
Model: MET-SDS31645
Metallics SDS-Plus Hammer Drill Bit 3/16" x 4-1/2"Professional masonry drilling performance with precision engineeringThe Metallics SDS-Plus Hammer Drill Bit delivers reliable drilling performance...
Metallics
$97.16
$59.90
Bit 5/32 x 4-1/2" Concrete/Masonry
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics CD2-BIT – Frequently Asked Questions
1) Is a 4-1/2 inch masonry bit long enough for the depth I need?
Overall length on the CD2-BIT is 4-1/2 inches, which includes the shank held in the chuck. Usable flute depth is less than the overall length, so for embedment deeper than roughly three inches into block or concrete you want a longer bit. For typical short masonry screw and anchor work through a strap or box into block, 4-1/2 inches is the common working length.
2) Can I use the CD2-BIT in a hammer drill or does it need a rotary hammer?
A 5/32 inch masonry bit of this type runs in a standard round-shank chuck, so it goes in a drill or a hammer drill. It is not an SDS shank, so it will not fit an SDS rotary hammer without a chuck adapter. For small-diameter anchor holes in block and concrete, hammer-drill mode is what you want.
3) I am mounting conduit straps and boxes to block walls. Is this the right bit for electrical masonry fastening?
Yes, that is the job it is sold for. The CD2-BIT is a concrete and masonry bit in 5/32 inch, the pilot size used with small masonry screws and drive anchors for securing straps, clamps, and device boxes to block and poured concrete. Metallics lists it with its electrical fastener line rather than as general construction drilling.
4) Does the CD2-BIT come with anchors, or is it the bit only?
Bit only. The CD2-BIT is a single 5/32 inch x 4-1/2 inch masonry bit, so order your anchors or masonry screws separately and confirm they call for a 5/32 inch hole.
5) What is the exact part number to order this 5/32 masonry bit?
Order Metallics CD2-BIT. That is the manufacturer part number and it covers the 5/32 inch by 4-1/2 inch concrete and masonry bit; there are no size or finish options to pick on it.
How fast can I get the Metallics CD2-BIT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics CD2-BIT come with a warranty?
Absolutely. The Metallics CD2-BIT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics CD2-BIT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics CD2-BIT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.