You may also like
TRANS EYE BOLT CONN 7 POS 500-6
Manufacturer Resources
Product Specs
- Connection Type:
- Mechanical
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Number Of Conductors:
- 7
- Product Group:
- Wire & Cable Management
- Product Type:
- Eyebolt Multi-Tap Set-Screw Connector
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Temperature Range:
- up to 90 °C
- Type2:
- Wire connectors
- Wire Size:
- #2 to 500 kcmil
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Length 8-5/8 inches, Stud Size 3/4 X 4-1/2 inches
Blackburn ABP 7500 – Frequently Asked Questions
1) What wire sizes will the Blackburn ABP 7500 eyebolt connector accept?
The ABP 7500 takes conductors from #2 through 500 kcmil, and it has 7 tap positions. Mixed sizes within that range can share the block, so it works for tapping smaller branch conductors off a large feeder in a pull box or gutter.
2) Does the Blackburn ABP 7500 come insulated, or do I have to cover it myself?
It ships bare, with no insulation and a bare surface finish. In any accessible or live application you are responsible for the cover, either an insulating boot or tape system sized to the block, or installation inside an enclosure where the connector is guarded.
3) Can I use this eyebolt multi-tap connector on 90 degree C rated wire?
The ABP 7500 is rated up to 90 degrees C, so it matches THHN and other 90 C insulated conductors. Ampacity still has to be taken at whatever the lowest-rated element in the circuit allows.
4) Is the Blackburn ABP 7500 a set-screw connector or a compression lug?
Set-screw, mechanical type. Conductors are clamped under screws, so no hydraulic crimp tool or dies are needed, and a tap can be backed out and re-terminated later. If you want a permanent, tool-verified termination instead, a compression lug or splice is the other route, and that is a different part.
5) How many do I get when I order one Blackburn ABP 7500?
Sold each, one connector per unit. Order one per tap point; the block itself provides all 7 positions.
6) Is the Blackburn ABP 7500 made in the USA, and what part number do I spec?
Country of origin is the United States. Specify Blackburn ABP 7500 as the manufacturer part number for Buy American or domestic-preference submittals.
How fast can I get the Blackburn ABP 7500 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ABP 7500 come with a warranty?
Absolutely. The Blackburn ABP 7500 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ABP 7500?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ABP 7500 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.