You may also like
AL TP COMP SPLICE A:750 B:600
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice Service Entrance Insulated
- Selling Unit Of Measure:
- each
- Standards:
- ANSI C119.4
- Surface Finishing:
- Tin-Plated
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- 6.187 inch long, Outside Diameter 1.604 inch
Blackburn SAC 750 R 600 TN – Frequently Asked Questions
1) What conductor sizes does the Blackburn SAC 750 R 600 TN splice join?
It's a reducing compression splice: side A takes 750 and side B takes 600, so it joins a 750 conductor to a 600 conductor in one barrel rather than same-to-same. Two conductors total, one in each end.
2) Is this Blackburn splice insulated or does it need taping and covering after crimping?
Bare metal, no insulation on the connector itself, so the joint has to be insulated in the field with tape, a cover, or heat shrink sized to the barrel. Outside diameter is 1.604 inch and overall length 6.187 inch, which is what you size the shrink sleeve or cover against.
3) Does this splice meet ANSI C119.4 for underground and service entrance connectors?
Yes, it's built to ANSI C119.4, the standard covering connectors for use with aluminum and copper conductors. That's the reference a utility or institutional spec usually calls out for compression splices on service entrance and secondary cable.
4) Can I use this splice on aluminum conductors, and what about copper?
The SAC 750 R 600 TN is an aluminum-bodied compression splice, tin-plated, which is the standard construction for aluminum and for aluminum-to-copper transitions where a dual-rated connector is called for. The tin plating is what protects the aluminum barrel and allows contact with copper without direct dissimilar-metal contact.
5) Is this a crimp connector or a set screw splice?
Compression only. It gets crimped with a hydraulic tool and the correct die for the barrel, and it is not re-enterable the way a set screw or mechanical splice is. If you need something you can loosen and re-terminate later, a mechanical set screw splice is the better choice for that opening.
6) What is the exact part number to order this Blackburn reducing splice?
Blackburn part number SAC 750 R 600 TN. The SAC prefix is the splice series, the R marks it as a reducer, and TN is the tin-plated finish. Order by that full string, since the non-reducing 750 to 750 version carries a different number.
7) Will this splice fit inside a pull box or handhole with limited room?
Plan for 6.187 inch of straight length and a 1.604 inch outside diameter before you add insulating tape or a shrink sleeve. In a tight pull box or handhole that total, plus the bending radius on 750 cable, is usually the limiting factor rather than the connector itself.
8) How is the Blackburn SAC 750 R 600 TN sold, per piece or in bags?
Sold each, one splice per order line, so quantity is counted by the individual connector rather than by a bag or box. It is made in the United States.
How fast can I get the Blackburn SAC 750 R 600 TN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn SAC 750 R 600 TN come with a warranty?
Absolutely. The Blackburn SAC 750 R 600 TN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn SAC 750 R 600 TN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn SAC 750 R 600 TN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.