Bobrick B-1001375 Stainless St...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$111.14
$86.14
Bobrick B-1001375 Stainless Steel Strip Bracket -Continuous

Bobrick B-1001375 Stainless Steel Strip Bracket -Continuous

(No reviews yet) Write a Review

Model: 1001375

In Stock (leaves warehouse same day if ordered before 3pm ET)

$111.14
$86.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick B-1001375 Stainless Steel Strip Bracket -Continuous

Bobrick 1001375 Strip Bracket for Full Height Mounting

Bobrick 1001375 replacement 58" strip bracket used to attach toilet partition panel in line with the stile or pilaster; typically used in alcove stalls.
Bracket is constructed of 18-8, Type-304, heavygauge stainless steel with satin finish.
Full height mounting bracket is part of the optional Bobrick Continuous Hardware (.65 option) and Institutional Hardware (.67 option) kits.
Panel Height: 58"
Panel Thickness: 1/2" or 1"

Hardware to be used with the following Bobrick Toilet Partitions:
TrimLineSeries™ 1030.65, DesignerSeries™ 1040.65, DuraLineSeries® 1080.67 1180.67 and SierraSeries™ 1090.67.

Manufacturer Resources

Product Specs

Product Type:
Washroom Product
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Parts and Accessories
Product Category:
Parts and Accessories
Department:
Plumbing
Parts and Accessories Type:
Mounting Hardware
Application:
Toilet

Bobrick 1001375 – Frequently Asked Questions

1) What does the Bobrick B-1001375 strip bracket actually do on a toilet partition?
It is a full height mounting bracket that attaches a partition panel in line with the stile or pilaster, most often in an alcove stall where the panel runs wall to wall. Unlike a short two-piece clip, the bracket runs continuously the full 58 inch panel height, so the panel is supported along its entire edge rather than at two points.
2) Will the Bobrick 1001375 bracket fit my partition panel thickness?
The bracket is sized for panels 1/2 inch or 1 inch thick, and for a 58 inch panel height. If your panels are a different thickness or your panel height is not 58 inches, this is not the right bracket.
3) I need to replace a damaged panel bracket on an existing Bobrick stall. Is this the right part?
Yes, if the stall is one of the .65 or .67 hardware series and the panel is 58 inches high at 1/2 or 1 inch thick. The B-1001375 is sold as a replacement 58 inch strip bracket for exactly that repair. If the existing bracket is a short clip rather than a full height strip, your stall was built with the standard hardware package and this continuous bracket is not a drop-in.
4) What is the difference between Continuous Hardware and Institutional Hardware on Bobrick partitions when ordering this bracket?
They are two different optional hardware packages, ordered as the .65 suffix for Continuous and the .67 suffix for Institutional. The B-1001375 full height bracket is included in both. Which one your stall uses is determined by the model suffix on the partition: TrimLine 1030 and Designer 1040 take the .65 package, while DuraLine 1080 and 1180 and Sierra 1090 take the .67 package.
5) Is this strip bracket stainless steel and will it hold up in a high traffic restroom?
Construction is 18-8, Type 304 heavy gauge stainless steel with a satin finish, which is the standard corrosion resistant grade for wet restroom environments and stands up to routine cleaning chemicals. The satin finish matches the typical Bobrick partition hardware look, so a replacement bracket blends with the existing stiles.
6) Does the strip bracket mount the panel to a wall or to the pilaster?
It mounts the panel in line with the stile or pilaster. The typical application is an alcove stall, where the panel runs between the pilaster and the wall and needs continuous support along that edge.
How fast can I get the Bobrick 1001375 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 1001375 come with a warranty?
Absolutely. The Bobrick 1001375 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 1001375?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 1001375 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!