Bobrick B-1002389 Strip, Stain...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$118.77
$93.77
Bobrick B-1002389 Strip, Stainless Steel with Holes, 71 1/2"

Bobrick B-1002389 Strip, Stainless Steel with Holes, 71 1/2"

(No reviews yet) Write a Review

Model: 1002389

In Stock (leaves warehouse same day if ordered before 3pm ET)

$118.77
$93.77
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick B-1002389 Strip, Stainless Steel with Holes, 71 1/2"

Bobrick 1002389 Strip Bracket for 72" Maximum Height Mounting

Bobrick 1002389 replacement 72" strip bracket used to attach 1/2" thick toilet partition panel in line with the stile or pilaster; typically used in alcove stalls.
Bracket is constructed of 18-8, Type-304, heavygauge stainless steel with satin finish.
To be used with 72" maximum height partition series.
Full height mounting bracket is part of the optional Bobrick Continuous Hardware (.65 option) and Institutional Hardware (.67 option) kits.
Panel Height: 72"
Panel Thickness: 1/2"

Hardware to be used with the following Bobrick Toilet Partitions:
DuraLineSeries® 2080.67, 2180.67

Manufacturer Resources

Product Specs

Product Type:
Washroom Product
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Parts and Accessories
Department:
Plumbing
Parts and Accessories Type:
Mounting Hardware
Application:
Toilet

Bobrick 1002389 – Frequently Asked Questions

1) What does the Bobrick B-1002389 stainless strip bracket actually do in a toilet partition?
It is a full height mounting bracket that attaches a 1/2 inch thick partition panel in line with the stile or pilaster, most often in an alcove stall layout. The strip runs the full 72 inch panel height and is pre-punched with holes for fastening, so the panel is supported along its whole edge rather than at two or three points.
2) Will this Bobrick strip bracket fit my partition panel thickness and height?
It is sized for 1/2 inch thick panels on partition series with a 72 inch maximum height. If your panels are a different thickness or your partition run is taller than 72 inches, this bracket is not the right part.
3) Which Bobrick toilet partitions is the 1002389 bracket used with?
Bobrick lists it for DuraLine Series 2080.67 and 2180.67 partitions. It is also supplied as part of the optional Continuous Hardware (.65) and Institutional Hardware (.67) hardware kits, so if you are ordering those packages the strip is already included.
4) My partition panel is pulling away from the wall in an alcove stall. Is the 1002389 the replacement part?
Yes, if the failed piece is the continuous vertical strip along the panel edge on a 72 inch Bobrick DuraLine stall with 1/2 inch panels. The 1002389 is sold as a replacement strip bracket for exactly that condition. If the panel instead attaches to the wall with two or three short U-brackets, you need those individual brackets, not the continuous strip.
5) Is this stainless bracket durable enough for a high traffic restroom?
The strip is 18-8 Type 304 heavy gauge stainless with a satin finish, which is the standard corrosion resistant specification for wet public washrooms and holds up to repeated cleaning. Satin also hides handling marks better than a polished finish, which matters on a full height piece at panel edge where people brush past it.
6) Does the Bobrick strip bracket come with screws or anchors?
The 1002389 is the stainless strip itself, pre-drilled with mounting holes. Fasteners and wall anchors are specified separately based on your wall construction, so plan on sourcing the appropriate tamper resistant screws for block, tile over stud, or drywall backing when you install it.
7) Should I use a continuous full height strip bracket or individual panel brackets?
A continuous strip spreads load along the entire 72 inch panel edge and resists prying, which is why Bobrick bundles it into the Institutional Hardware (.67) package for facilities that see abuse, such as schools and correctional or high traffic public restrooms. Individual brackets are quicker to install and fine for standard commercial use. If you are standardizing a building on vandal resistant hardware, the full height strip is the one to spec.
How fast can I get the Bobrick 1002389 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 1002389 come with a warranty?
Absolutely. The Bobrick 1002389 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 1002389?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 1002389 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!