You may also like
Bobrick B-1002330 L Hinge Packet
Bobrick 1002330 replacement L-Hinge for standard toilet partition commercial hardware.
Hinge is constructed of 18-8, Type-304, heavy-gauge stainless steel with satin finish.
Balanced hinge is adjustable to hold door of unoccupied toilet compartment partially open or fully closed.
Features
- This item is a replacement part and/or hardware therefore non-refundable.
- Bobrick 1002330 replacement L-Hinge for standard toilet partition commercial hardware.
Hinge is constructed of 18-8, Type-304, heavy-gauge stainless steel with satin finish.
Balanced hinge is adjustable to hold door of unoccupied toilet compartment partially open or fully closed. - Hardware to be used with the following Bobrick Toilet Partition Series:
TrimLineSeries™ 1030/2030, DesignerSeries™ 1040/2040, AccentSeries™ 1530, MetroSeries™ 1550, DuraLineSeries® 1080/2080 1180/2180, SierraSeries™ 1090 - Replacement parts and hardware are non-refundable therefore it is recommended the manufacturer be contacted directly to confirm the correct replacement part number.
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Parts and Accessories Type:
- Partition Hardware
- Application:
- Washroom Accessory
Bobrick 1002330 – Frequently Asked Questions
1) Will the Bobrick B-1002330 hinge packet fit a DesignerSeries 1040 toilet partition?
Yes. The B-1002330 hinge packet is made for Bobrick's standard toilet partition hardware and works across the TrimLine 1030/2030, DesignerSeries 1040/2040, AccentSeries 1530, MetroSeries 1550, DuraLine 1080/2080 and 1180/2180, and SierraSeries 1090 partitions. If your compartments are one of those series, this is the right hinge family.
2) What is the difference between the L hinge and the J hinge on the Bobrick partition hinge packet?
The B-1002330 packet is ordered by hinge shape, L or J, and those are two different bracket geometries used at different mounting points on a Bobrick compartment door. Pull the old hinge off the door and match the shape of the leg before you order, because a replacement part like this is non-refundable once it ships.
3) Will a Bobrick 1002330 hinge hold a toilet stall door partly open when nobody is in the stall?
That is exactly what it does. The hinge is a balanced type and it is adjustable, so you can set it to rest the door of an unoccupied compartment either partially open or fully closed. Facility crews usually set them partially open so people can see which stalls are free.
4) What material are Bobrick B-1002330 partition hinges made of, and will they hold up in a high traffic restroom?
18-8 Type 304 stainless steel in a heavy gauge, with a satin finish. Type 304 is the standard corrosion resistant grade used in wet washroom environments, which is why it is the usual pick for school, stadium, and airport restrooms where the doors get swung thousands of times a week and get hit with wet mopping and cleaners.
5) Do I get a full set of hinges for one door, or a single hinge, with the Bobrick B-1002330?
It is sold as a hinge packet, meaning the hinge and its associated mounting hardware for the replacement, in one shape (L or J). A compartment door typically uses more than one hinge point, so count the hinges on the door you are repairing and order per hinge position rather than assuming one packet does the whole door.
6) Can I order the Bobrick B-1002330 hinge packet and return it if it turns out to be the wrong part?
No. Bobrick replacement parts and hardware, this hinge packet included, are non-refundable. Confirm the series and the hinge shape off the existing door before ordering. If you are unsure which part number your compartment takes, Bobrick can confirm the correct replacement number against your partition series.
7) I have Bobrick DuraLine 1080 stalls and a sagging door. Is a hinge packet what I need?
For a door that has dropped or will not stay where you set it, the hinge is the usual culprit and the B-1002330 packet covers DuraLine 1080/2080 and 1180/2180 among other Bobrick series. Because the hinge is the adjustable, balanced type, a worn or damaged one loses the ability to hold the door at rest, which is the symptom most people describe as a sagging or swinging stall door.
8) Will Bobrick 1002330 hinges match the satin stainless hardware already on my other stalls?
The hinges come in satin stainless, which is the standard finish on Bobrick stainless partition hardware, so a single replaced door will read the same as the rest of the run. If your existing compartments have a different finish, such as a painted or powder coated door hardware set, the satin stainless will not match visually even though it will mount.
How fast can I get the Bobrick 1002330 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 1002330 come with a warranty?
Absolutely. The Bobrick 1002330 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 1002330?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 1002330 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.