You may also like
Bobrick B-1001368 Stainless Steel U Wall Channel -Continuous 1/2" Material
Model: BOB-B-1001368
Bobrick B-1001368 U-Channel Bracket for Full Height MountingBobrick 1001368 U-Channel Bracket for Full Height MountingBobrick 1001368 replacement 58" U-channel bracket used to attach a 1/2" tick...
Bobrick
$150.74
$125.74
Bobrick B-1002388 U-Channel Bracket for 72" Maximum Height Mounting
- Bobrick 1002388 replacement 72" U-channel bracket used to attach a 1/2" tick toilet partition panel to a stile or pilaster or to attached a 1/2" thick toilet partition panel to a wall.
Bracket is constructed of 18-8, Type-304, heavygauge stainless steel with satin finish.
To be used with 72" maximum height partition series.
Full height mounting bracket is part of the optional Bobrick Continuous Hardware (.65 option) and Institutional Hardware (.67 option) kits.
Panel Height: 72"
Panel Thickness: 1/2"
Hardware to be used with the following Bobrick Toilet Partitions:
DuraLineSeries® 2080.67, 2180.67
Manufacturer Resources
Product Specs
- Product Type:
- U-Channel Bracket
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Parts and Accessories Type:
- Mounting Hardware
- Application:
- Toilet
Bobrick 1002388 – Frequently Asked Questions
1) What does the Bobrick 1002388 U-channel bracket actually do on a toilet partition?
The 1002388 is the full-height mounting channel that secures a 1/2 inch thick toilet partition panel, either to a pilaster (stile) or to a wall. It runs the full 72 inches rather than sitting as a pair of short clips, so the panel edge is supported continuously top to bottom. It is a hardware component, not a panel, so you order it to replace or complete the mounting on a partition you already have.
2) Which Bobrick partition series does the 1002388 U-channel work with?
It is specified for Bobrick DuraLine Series 2080.67 and 2180.67 partitions. The .67 suffix is the Institutional Hardware option, and this full-height channel is part of that kit as well as the .65 Continuous Hardware kit. If your partitions carry one of those hardware options and use 72 inch high panels at 1/2 inch thick, this is the matching channel.
3) Does the 1002388 U-channel work on 55 inch or 58 inch high toilet partition panels?
It is made for 72 inch maximum height partition series, so it is cut for full-height panels. On a shorter standard-height panel the 72 inch channel is longer than the panel edge and is not the correct part. Match the channel to the panel height your partitions were built to.
4) What material is the Bobrick 72 inch continuous U-channel made from, and will it hold up in a high traffic restroom?
Heavy gauge 18-8, Type-304 stainless steel with a satin finish. Type 304 is the standard corrosion resistant stainless used in wet public washrooms, which is why the continuous and institutional hardware options use it. Satin finish also matches the typical stainless partition hardware already on the openings, so a replacement channel does not stand out against the rest of the hardware in the room.
5) Can I use one U-channel bracket to mount a partition panel both to the wall and to the pilaster?
Each 1002388 channel handles one panel edge. A panel that runs from the wall to a pilaster has two edges to secure, so plan on one channel per edge, not one per panel. Count the panel edges in the run before ordering quantity.
6) What is the difference between continuous U-channel and standard partition brackets?
Standard partition mounting uses short brackets at two or three points along the panel edge. This channel is continuous, running the full 72 inches of the panel edge, which spreads the load across the whole edge instead of concentrating it at a few fasteners. That is the reason it is packaged under the Continuous (.65) and Institutional (.67) hardware options, which are the specifications written for schools, stadiums and other heavy abuse restrooms. If your partitions were ordered with standard hardware, this channel is not the part that came on them.
7) Is the Bobrick 1002388 a replacement part I can order on its own for a damaged partition?
Yes, the 1002388 is sold as a replacement U-channel rather than only inside a complete hardware kit. That matters for maintenance work in an occupied facility, where a single vandalized or corroded channel is the only thing keeping the panel out of service. Confirm the panel is 1/2 inch thick and 72 inches high and the channel drops straight into the existing condition.
How fast can I get the Bobrick 1002388 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 1002388 come with a warranty?
Absolutely. The Bobrick 1002388 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 1002388?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 1002388 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.