You may also like
Bobrick B-2116 Heavy-Duty Clothes Hook with Exposed Mounting
Model: BOB-B-2116
Bobrick B-2116 Heavy-Duty Clothes Hook with Exposed Mounting
Locks to wall plate with three stainless steel setscrews for theft resistant mounting. Hook and flange are one-piece brass casting with...
Bobrick
$55.09
$30.76
Bobrick B-211 Heavy-Duty Clothes Hook with Exposed Mounting
Mounts with three exposed countersunk mounting screw holes. Hook and flange are one-piece brass casting with satin nickel-plated finish to match stainless steel. Withstands 300 lbs (136 kg) downward pull. Flange diameter: 2 3/4″ (70mm). Unit projects 3 7/16″ (85mm).
Features
- Brass casting, satin finish to match stainless steel
- Surface Mount, exposed mounting
- 2-3⁄4″ Diameter x 3-7⁄16″ Deep
- 2-3⁄4″ Diameter x 3-7⁄16″ Deep
- Heavy duty
- Withstands 300 lbs downward pull
Material
- Hook and Flange — One-piece brass casting with satin nickel-plated finish. Withstands 300-lb (136-kg) downward pull if properly installed.
SPECIFICATION:
Heavy-duty robe hook shall be one-piece brass casting with satin nickel-plated finish. Hook shall withstand 300-lb (136-kg) downward pull when properly installed.
Product Specs
- Product Categories : Hooks
- Accessibility : ADA Compliant
DOCUMENTATION:
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Clothes Hooks
- Product Type:
- Clothes Hook
- Commercial/Residential:
- Residential
- Product Category:
- Washroom/Bath Accessories
- Department:
- Plumbing
Bobrick 211 – Frequently Asked Questions
1) How much weight will the Bobrick B-211 clothes hook hold?
The B-211 withstands a 300 lb (136 kg) downward pull when properly installed. That rating comes from the hook and flange being a single brass casting rather than a stamped or hollow hook, which is why it gets used in locker rooms, gang showers and dorm bathrooms where hooks get hung on rather than just hung from.
2) How does the Bobrick B-211 hook mount to the wall, and are screws included?
It is a surface-mounted hook with three exposed countersunk screw holes in the flange, so the fasteners stay visible after install. The description does not name any fasteners supplied with it, so plan on anchors suited to your wall: toggles or through-bolts in hollow drywall, sleeve anchors in block or tile over masonry. With a 300 lb pull rating, the anchor is usually the limiting factor, not the hook.
3) How far does the Bobrick B-211 stick out from the wall?
Projection is 3-7/16 inches (85 mm) from the finished wall, on a 2-3/4 inch (70 mm) diameter flange. That projection matters in a tight toilet compartment or behind an inswing door: measure clear door swing and ADA clear floor space before you set the height, because a 3-7/16 inch hook can catch a door edge or a wheelchair path.
4) Will the satin nickel B-211 hook match stainless steel washroom accessories?
Yes. The hook is brass with a satin nickel-plated finish specifically made to match stainless steel, so it blends with stainless grab bars, paper holders and mirror frames on the same wall. If you are standardizing a building on one look, this is the finish to specify alongside satin stainless partitions and accessories.
5) Is the Bobrick B-211 clothes hook ADA compliant?
The product specs list the B-211 as ADA Compliant. Compliance in practice still depends on your mounting height and the clear floor space in front of it, since the hook itself does not control reach range. In an accessible toilet compartment, mount it within the allowable reach and keep it out of the door swing.
6) Should I use an exposed-mount clothes hook like the B-211 or a concealed-mount one?
Exposed mounting, as on the B-211, means three visible countersunk screws through the flange. You can install it on a finished wall without pulling tile or cutting in a backing plate, and you can replace it later without touching the wall face. Concealed mounting hides the fasteners for a cleaner look but generally wants the wall opened or blocked before finishing. For retrofit work in an existing restroom, the exposed version is the one that installs without demolition.
7) Will the B-211 cover the holes left by the hook I am replacing?
The flange is 2-3/4 inches (70 mm) in diameter, so it hides anything inside roughly a 2-3/4 inch circle. Since the flange takes three screws rather than two, the old holes almost certainly will not line up, and you will be drilling fresh ones inside that footprint. On tile, lay the flange over the existing holes first and confirm the new screw locations fall on solid tile, not on an old hole.
8) Will the Bobrick B-211 hook corrode in a shower or pool area?
The body is cast brass with nickel plating, not painted steel, so it holds up better than a plated-steel hook in a wet environment. Bobrick publishes a care and maintenance document for its washroom accessories; the practical rule with plated finishes is to clean with mild soap and water and stay off abrasives and acidic or chlorine-based cleaners, which attack plating faster than the humidity does.
How fast can I get the Bobrick 211 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 211 come with a warranty?
Absolutely. The Bobrick 211 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 211?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 211 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.