You may also like
Bobrick B-211 - Heavy-Duty Clothes Hook with Exposed Mounting, Satin Nickel-Plated Finish
Model: BOB-B-211
Bobrick B-211 Heavy-Duty Clothes Hook with Exposed Mounting
Mounts with three exposed countersunk mounting screw holes. Hook and flange are one-piece brass casting with satin nickel-plated finish to...
Bobrick
$56.30
$28.97
Bobrick B-2116 Heavy-Duty Clothes Hook with Exposed Mounting
Locks to wall plate with three stainless steel setscrews for theft resistant mounting. Hook and flange are one-piece brass casting with satin nickel-plated finish to match stainless steel. Withstands 300 lbs (136 kg) downward pull. Flange diameter: 2 3/4″ (70mm). Unit projects 3 7/16″ (85mm).
Features
- Brass casting, satin finish to match stainless steel
- Surface Mount, concealed mounting
- 2-3/4″ Diameter x 3-7/16″ Deep
- Heavy duty
- Withstands 300 lbs downward pull
Product Specs
- Product Categories : Hooks
- Accessibility : ADA Compliant
Resources
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Clothes Hooks
- Product Type:
- Clothes Hook
- Product Category:
- Hooks
- Department:
- Plumbing
Bobrick 2116 – Frequently Asked Questions
1) How much weight will the Bobrick B-2116 clothes hook hold?
The B-2116 is rated to withstand a 300 lb (136 kg) downward pull. The hook and flange are a single one-piece brass casting rather than a bent or welded assembly, which is where that load rating comes from. For locker rooms, gang showers, and correctional or high-traffic public restrooms where people hang loaded bags off a hook, that rating is the reason to spec this one over a light-duty stamped hook.
2) How far does the Bobrick B-2116 hook stick out from the wall, and how much wall space does the flange cover?
Projection is 3-7/16 inches (85mm) off the finished wall, and the mounting flange is 2-3/4 inches (70mm) in diameter. Those two numbers are what you check against a toilet partition door or a narrow stall: a 3-7/16 inch projection needs clearance so the hook is not struck by a swinging door or in-swinging stall panel, and the 2-3/4 inch flange sets the minimum flat area you need around the mounting point.
3) Is the Bobrick B-2116 clothes hook theft resistant for a public restroom?
Yes. The hook body locks to a separate wall plate with three stainless steel setscrews, so the fasteners that hold it to the wall are not accessible once it is assembled. That is the configuration facility and MRO buyers want in vandal-prone washrooms, transit facilities, and schools, where an exposed-screw hook gets removed within a week.
4) Will the Bobrick B-2116 hook match stainless steel washroom accessories already installed?
It is meant to. The casting is brass with a satin nickel-plated finish specifically chosen to match stainless steel, so it blends with Bobrick stainless grab bars, paper dispensers, and shelves on the same wall. Property managers standardizing a building will not see the brass base material once it is up.
5) Can the Bobrick B-2116 be surface mounted on an existing tiled or block wall?
Yes, it is a surface-mounted hook, so no wall cavity or recess prep is needed. The wall plate goes up first and the cast hook body then locks onto it with the three setscrews. Because it is rated for a 300 lb pull, anchor the plate into something that will actually take that load, solid blocking, masonry, or a proper toggle in hollow construction, rather than into tile alone.
6) Is the Bobrick B-2116 one hook or a multi-hook rail?
It is a single clothes hook, sold as one unit. If you need several hanging points along a locker room bench or a changing room wall, you order multiple B-2116 units and space them, rather than one rail. Allow for the 2-3/4 inch flange diameter when laying out the spacing.
How fast can I get the Bobrick 2116 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 2116 come with a warranty?
Absolutely. The Bobrick 2116 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 2116?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 2116 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.