You may also like
Bobrick B-3479 Surface-Mounted Seat-Cover Dispenser and Toilet Tissue Dispenser
Model: BOB-B-3479
Bobrick B-3479 Surface-Mounted Seat-Cover Dispenser and Toilet Tissue Dispenser
Type-304 stainless steel with all welded construction; exposed surfaces shall have satin finish*. Surface-mounted...
Bobrick
Starting at
$653.90
$641.39
Bobrick B-221.MBLK Surface Mounted Seat-Cover Dispenser
Matte black powder coated finish stainless steel. Dispenses 250 single- or half-fold toilet seat covers or one box. Fills from bottom. Unit 15 3/4″ W, 11″ H, 2″ D (400 x 280 x 50mm). Allow 5″ (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit.
Features
- 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish or matte black, as specified.
- All-welded construction with beveled opening.
- Surface-mounted toilet-seat-cover dispenser shall be type-304, 22-gauge (0.8mm) stainless steel with all-welded construction; exposed surfaces shall have satin finish or matte black, as specified.
- Dispenser shall have a concealed opening in bottom for filling.
- Capacity shall be 250 paper toilet seat covers or one box.
DOCUMENTATION:
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Seat-Cover Dispenser
- Product Type:
- Seat-Cover Dispenser
- Commercial/Residential:
- Residential
- Product Category:
- Washroom/Bath Accessories
- Department:
- Plumbing
Bobrick 221.MBLK – Frequently Asked Questions
1) I need this to match satin stainless accessories already in the restroom. Is this the right one?
No. The B-221.MBLK is the matte black version only. The B-221 platform is built in either satin stainless or matte black, so if your other partitions and dispensers are satin stainless, order the satin variant of the B-221 rather than the .MBLK suffix.
2) Is the Bobrick B-221 surface mounted or does it need a wall recess?
Surface mounted. It hangs on the finished wall face with a 2 inch projection, so there is no rough-in cavity, no blocking between studs and no tile cut-out to coordinate. That makes it the practical choice for a retrofit into an existing restroom where you cannot open up the wall.
3) Does the Bobrick B-221 load from the front or the bottom?
It fills from below through a concealed opening in the bottom of the cabinet. There is no front door or hinged flap to open, which is why the 5 inch minimum clearance under the unit matters for your housekeeping staff. If your mounting location is tight underneath, that is the detail that will stop this model from working.
4) How many toilet seat covers does the Bobrick B-221 hold?
Capacity is 250 paper seat covers, single-fold or half-fold, or one full box loaded as-is. For high-traffic restrooms that means one fill per box, which keeps restocking simple for a janitorial route.
5) Will the matte black finish on this Bobrick dispenser hold up in a public restroom?
The shell is 18-8 type-304 stainless steel, 22-gauge (0.8 mm), with a matte black powder coated finish and all-welded construction. Stainless under the coating means the body itself is corrosion resistant, and welded seams give no crevices for grime. Handle it as a painted surface during cleaning rather than scrubbing it like bare stainless.
6) Can I mount a seat-cover dispenser like this above the toilet paper dispenser or grab bar?
Only if you keep 5 inches (125 mm) clear between the bottom edge of the dispenser and the top of that grab bar, shelf or paper holder. That gap is what lets staff load covers into the concealed bottom opening. Where the wall is crowded, shift the dispenser laterally rather than dropping it lower.
7) Does the Bobrick B-221 take single-fold or half-fold seat covers?
Both. It dispenses single-fold or half-fold paper covers, so you are not locked into one supplier's fold when you restock. You can also drop in a full box of 250 rather than counting sheets.
How fast can I get the Bobrick 221.MBLK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 221.MBLK come with a warranty?
Absolutely. The Bobrick 221.MBLK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 221.MBLK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 221.MBLK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.