Bobrick B-223 Mop and Broom Holder, Satin Finish
24″ (610mm) long. Type 304 stainless steel, satin finish. Anti-slip mop holders have spring-loaded rubber cam that grips handles 7/8″ to 1 1/4″ (20-30mm) diameter. Holds 3 mops 3 1/4″ (85mm) from wall. Height 5″ (125mm).
Features
- Surface Mount
- 24″ L x 5″ H x 4-1/4″ D
- Grips handles 7⁄8″ to 1-1⁄4″ diameter
- Holds 3 mops 3-1⁄4″ from wall.
Product Specs
- Product Categories : Mop and Broom Holders
- Finish : Satin-Finish Stainless Steel
Resources
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Mop and Broom Holder
- Product Type:
- Mop and Broom Holder
- Commercial/Residential:
- Residential
- Product Category:
- Washroom/Bath Accessories
- Department:
- Plumbing
Bobrick 223X24 – Frequently Asked Questions
1) What handle diameters does the Bobrick B-223 mop holder grip?
The spring-loaded rubber cams on the B-223 grip handles from 7/8 inch to 1-1/4 inch (20-30mm) in diameter. That covers most standard wet mop and push broom handles. Anything thinner than 7/8 inch won't be held under spring tension, and a fat shaft over 1-1/4 inch won't seat in the cam.
2) Does the Bobrick B-223 come in a longer size than 24 inches?
Two lengths are offered: 24 inch and 36 inch. The 24 inch holds 3 mops. If you're outfitting a housekeeping closet that also parks brooms and dust mops, the 36 inch gives you the extra run along the same wall.
3) Is the Bobrick B-223 mop rack stainless steel, and will it hold up in a wet janitor closet?
It's Type 304 stainless steel with a satin finish, which is the usual choice for damp custodial closets and washroom environments where painted steel racks streak and rust.
4) How does the Bobrick B-223 mount to the wall, and can I put it on drywall?
It's a surface mount unit, so it fastens to the face of the finished wall rather than recessing into it. On block or tile over masonry you can anchor straight through; on hollow drywall, hit studs or blocking behind it, because three loaded wet mops on a 24 inch rack put real pull-out load on the fasteners.
5) Will the Bobrick B-223 hold brooms and squeegees, not just mops?
Any tool with a handle between 7/8 and 1-1/4 inch diameter will grip, which includes most push brooms, squeegees and dust mops as well as wet mops. The rubber cam is spring loaded and anti-slip, so the handle is held rather than just resting in a hook.
6) Does the Bobrick B-223 match other satin stainless washroom accessories already installed?
The finish is satin Type 304 stainless, the same finish family Bobrick uses across its washroom accessory line, so it reads consistently next to satin stainless grab bars, paper dispensers and shelves on the same job.
How fast can I get the Bobrick 223X24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 223X24 come with a warranty?
Absolutely. The Bobrick 223X24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 223X24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 223X24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.