Bobrick B-239 x 24 - Shelf with Mop and Broom Holders and Hooks, Satin Finish

Three anti-slip mop holders and four hooks. The three holders are the ones that grip a handle upright, so three mops or brooms hang vertically off the wall. The four hooks are for the rest of the kit, dust pans, spray bottles with a loop, caddies, cords, and the shelf surface itself takes the gallon jugs and buckets. If you are outfitting a housekeeping closet that runs more than three wet mops on a shift, size up to a longer unit or hang a second one.

Stainless steel with a satin finish throughout. That matters more here than on most washroom accessories, because a mop rack lives in constant contact with wet mop heads, bleach residue, and quat cleaner splash. Satin stainless takes that without the blistering you get from painted or powder coated racks, and it hides scuffs from handles being dragged in and out better than a bright polished finish would. Wipe it down with a damp cloth; abrasive pads will scratch the grain.

Over a mop sink is the normal placement, and the 8 inch projection is what makes it work: the mop heads hang clear of the wall and drip into the basin below rather than down the finish. Set the mounting height so the longest handle you carry clears the sink rim when it is seated in a holder. Because it surface mounts, it can go on tile, block, or a finished gypsum wall with proper anchors, and it does not need to be planned into the wall before the finish goes on.

Both. The unit is a shelf with the mop and broom holders and hooks built into the underside of it, 34 inches of shelf length over three holders and four hooks. So you get one mounting operation for storage above and hanging below, which is the reason it goes in over a mop sink instead of a bare holder strip. The shelf carries the chemical jugs and the holders take the handles.