Bobrick B-543 Surface Mounted Single Roll Toilet Tissue Dispenser

There is a set screw in the post that locks the roll spindle in place, which stops casual roll theft and pulling the unit apart. Construction is stainless steel. It is an open dispenser, so the roll itself is exposed, which suits offices, schools, and light commercial more than heavily abused facilities where a fully enclosed locking dispenser is the better call.

Two stainless steel finishes: bright polish and satin. Bright polish is the mirror-look finish that matches polished chrome grab bars and mirror frames; satin is the brushed look used across most commercial stainless washroom accessory lines. Pick the one that matches the soap dispensers and grab bars already in the room.

A single-roll unit like the B-543 works where restocking is frequent and the stall is small, private offices, single-occupancy restrooms, residential units in multi-family buildings. In high-traffic public washrooms, a two-roll or jumbo-roll dispenser cuts service trips because a single 4 inch wide standard roll runs out fast. The B-543 is also surface mounted, so it is the choice when you cannot cut into the wall.

Yes. It surface mounts and projects 3/8 inch off the wall in depth, so it goes on a partition panel, tile wall, or drywall without any recess. Use fasteners appropriate to the substrate; on a metal or plastic-laminate partition, through-bolting is the usual approach.

They are separate Bobrick model numbers. The B-543 is the surface mounted single roll stainless steel tissue dispenser, 5-1/8 by 3-3/8 inches, taking standard-core rolls up to 4 inches wide. Order by B-543 and specify satin or bright polish finish to get this unit.