Bobrick B-547 Surface-Mounted ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$102.56
$79.11
Bobrick B-547 Surface-Mounted Double Roll Toilet Tissue Dispenser

Bobrick B-547 Surface-Mounted Double Roll Toilet Tissue Dispenser

(No reviews yet) Write a Review

Model: 547
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$102.56
$79.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick B-547 Surface-Mounted Double Roll Toilet Tissue Dispenser

Threaded escutcheon conceals mounting plate, provides snug fit to the wall. Accepts standard-core size from 3/4″ (20mm) up to 1 1/2″ (40mm) and 4″ (100mm) wide. Set screw in post prevents vandalism. Escutcheon diameter 2″ (50mm). Overall width 10-5/8″ (270mm). Height 4-1/2″ (115mm). Unit projects 1-5/16″ (35mm) from wall (without tissue roll).

Available Finish:
Satin

Product SpecsFinish : Satin-Finish Stainless SteelMounting Options : Surface MountedTissue Type : Standard Roll - Double Technical Data SheetInstallation Instructions

Manufacturer Resources

Product Specs

Capacity:
2 Standard Core Toilet Paper Rolls
Product Type:
Toilet Paper Dispenser
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Toilet Paper Dispenser
Product Material:
Stainless Steel
Department:
Plumbing
Product Depth:
1-5/16"

Bobrick 547 – Frequently Asked Questions

1) Will the Bobrick B-547 hold the jumbo rolls we buy, or only standard core tissue?
Standard core rolls only. The B-547 takes two rolls with a core from 3/4 inch (20mm) up to 1-1/2 inch (40mm) and a roll width of 4 inches (100mm). Jumbo roll tissue with a large center core will not mount on the spindles, so if your facility runs jumbo tissue you need a jumbo roll dispenser instead.
2) Is the Bobrick B-547 a surface mount unit or does it need to be recessed into the wall?
Surface mounted. The B-547 fastens to the finished wall face, so there is no wall cavity work, no rough-in opening and no framing coordination. That makes it the practical choice for retrofits, tile walls and toilet partitions where you cannot cut in a recessed cabinet.
3) How much wall space do I need for a Bobrick B-547 double roll tissue dispenser?
Allow 10-5/8 inches (270mm) of width and 4-1/2 inches (115mm) of height. It stands 1-5/16 inches (35mm) off the finished wall without tissue loaded, so it stays clear of most grab bar and side wall clearances on a stall partition.
4) How does the mounting plate get concealed on the B-547, and can users pull the dispenser off the wall?
A threaded escutcheon, 2 inches (50mm) in diameter, threads over the mounting plate and pulls tight to the wall so the fasteners are hidden and there is no gap to pry at. A set screw in the post locks the assembly, which is the anti-vandalism detail that matters in high traffic public restrooms.
5) What material and finish is the Bobrick B-547 tissue dispenser, and will it hold up in a school or airport restroom?
Stainless steel with a satin finish, which is the one finish offered. Satin stainless hides fingerprints and scratches better than bright polished, and it is the standard specification for institutional restrooms because it stands up to routine cleaning chemicals. If you are standardizing a facility on satin stainless accessories, this matches.
6) Does a single B-547 cover a stall, or do I need two dispensers per toilet?
One unit per stall is enough in most cases. It carries two standard core rolls side by side in a 10-5/8 inch (270mm) wide body, so the reserve roll is in place and housekeeping is not restocking every round. That is the usual reason property managers and MRO buyers pick a double over a single roll dispenser.
7) Can I mount the Bobrick B-547 on a toilet partition panel or does it have to go on a solid wall?
It is a surface mounted unit, so it goes on the finished face of whatever you are fastening to, including a partition panel, as long as you use anchors suited to that substrate. Plan for the 2 inch (50mm) escutcheon footprint at each mounting point and 1-5/16 inch (35mm) of projection off the face.
How fast can I get the Bobrick 547 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 547 come with a warranty?
Absolutely. The Bobrick 547 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 547?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 547 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!