Bobrick B-7686 Surface Mounted Toilet Tissue Dispenser

Yes. It's a double standard-roll dispenser, so it carries two regular-core rolls side by side. It is not built for jumbo or coreless tissue, so if your building standardizes on large-core jumbo rolls you need a different dispenser family.

The B-7686 is listed as ADA compliant. Compliance still depends on where you set it: the dispenser has to be mounted within the reach range and at the required distance from the water closet for your jurisdiction, so the mounting height and location on the drawing carry as much weight as the unit itself.

Yes, because it is a surface mounted unit it fastens to the face of the finished wall, with no chase or recess needed behind it. That makes it the right pick for concrete, block, or tiled walls where cutting in a recessed dispenser isn't practical. Anchors should suit the substrate you're fastening into.

Two: bright polished stainless and satin stainless. Bright polished is a mirror-like finish that reads high end but shows fingerprints and smudges quickly, which matters in high-traffic public washrooms. Satin is the usual choice for schools, stadiums, and other heavy-use facilities because scuffs blend into the brushed grain.

For a fleet swap, order the finish that matches what's already up. Bright polished stainless pairs with mirror-polished grab bars and shelves; satin stainless matches brushed accessories, which is what most commercial washroom packages are specified in. Both finishes are stainless steel, so the base material is consistent with the rest of a stainless accessory set.