You may also like
Bobrick B-207 - Shower Curtain Rod with Concealed Mounti
Model: BOB-B-207
Bobrick B-207 - Shower Curtain Rod with Concealed Mounting
1″ (25mm) diameter rod is 20-gauge (1.0mm), type 304 stainless steel, satin finish. 1 3/8″ (35mm) diameter flanges are chrome-plated...
Bobrick
Starting at
$82.91
$53.49
Bobrick B-6047×60 ClassicSeries® Extra Heavy Duty Shower Curtain Rod
Type 304 stainless steel, satin finish. 18-gauge (1.2mm), 1 1/4″ (32mm) diameter rod. Flanges are 2 1/2″ (65mm) square.
Available Lengths
- B-6047 x 48: 48″ (1219mm)
- B-6047 x 60: 60″ (1524mm)
- B-6047 x 72: 72″ (1830mm)
Features
- Stainless steel, satin finish
- Surface Mount
- 60″ Long x 1-1/4″ Diameter
Product Specs
- Product Categories : Shower Curtains and Rods
- Finish : Satin-Finish Stainless Steel
Resources
Manufacturer Resources
Product Specs
- Product Type:
- Shower Rods
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Shower Accessories
- Product Diameter:
- 1-1/4"
- Product Material:
- Stainless Steel
- Department:
- Plumbing
Bobrick 6047x36 – Frequently Asked Questions
1) What lengths does the Bobrick B-6047 shower curtain rod come in?
The B-6047 ClassicSeries rod is offered in 36, 48, 60 and 72 inch lengths. The 48 inch equals 1219mm, 60 inch equals 1524mm and 72 inch equals 1830mm. Pick the length that matches your rough opening wall to wall, since the rod is a fixed length with square flanges at each end rather than a tension or telescoping design.
2) How is the Bobrick B-6047 shower rod mounted to the wall?
It surface mounts. Each end carries a 2-1/2 inch (65mm) square flange that fastens to the finished wall, so you need solid backing or anchors at both ends. There is no concealed or recessed prep involved, which makes it a straightforward swap on tile or panel walls in a renovation.
3) Is this shower rod heavy enough for a hotel or dorm bathroom where guests grab it?
That is what the extra heavy duty build is for. The rod is 1-1/4 inch diameter Type 304 stainless in 18-gauge (1.2mm) wall, which is a thicker tube than typical residential rods, and the square end flanges spread the load into the wall. For high traffic multi-family, dormitory and hospitality washrooms this is the grab-resistant class of rod, provided the wall anchoring behind the flange is sound.
4) Will standard shower curtain hooks slide on a 1-1/4 inch rod?
Yes. The B-6047 uses a 1-1/4 inch (32mm) outside diameter tube, which is the common commercial shower rod size, so standard commercial curtain hooks and grommeted curtains ride on it. Note the rod is fixed at both ends by flanges, so curtains and hooks have to be threaded on before the rod is mounted or the hooks opened to load them afterward.
5) Can this rod be cut down to fit an odd size shower opening?
Order it to the nearest stated length instead. The B-6047 ships as a finished assembly with a flange at each end, in 36, 48, 60 and 72 inch lengths, so cutting removes the factory end prep. For openings between sizes, measure wall to wall and go with the length that fits, since the flanges themselves add face coverage at each wall.
6) I am standardizing shower rods across a whole property. Can I mix lengths and still match?
Yes. Every length of the B-6047 uses the same 1-1/4 inch satin stainless rod and the same 2-1/2 inch square flange, so a 48 inch unit in one bathroom and a 72 inch in another read identically on the wall. Only the span changes, which is what makes this rod workable as a single spec across a mixed unit mix.
7) Will the satin stainless finish hold up in a wet, chemically cleaned shower?
The rod is Type 304 stainless steel in a satin finish throughout, not plated or painted steel, so it handles constant humidity and routine washroom cleaning without the chipping or rust bleed you get from a chrome-over-steel rod. Satin also hides water spotting better than a polished finish across a run of identical units.
How fast can I get the Bobrick 6047x36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 6047x36 come with a warranty?
Absolutely. The Bobrick 6047x36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 6047x36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 6047x36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.