Metallics JBHC65 Bolts 1/2-13 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$52.01
$1.70
Metallics JBHC65 Bolts 1/2-13 X 1-3/4 Hxbt St-zn (Jar 50)

Metallics JBHC65 Bolts 1/2-13 X 1-3/4 Hxbt St-zn (Jar 50)

(No reviews yet) Write a Review

Model: JBHC65
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$52.01
$1.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Bolts 1/2-13 X 1-3/4 Hxbt St-zn (Jar 50)

  • Additional Notes

    • Other sizes and quantities available by request

Manufacturer Resources

Product Specs

Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Fastener Head Height:
Nov-32 in.
Fastener Head Type:
Hex
Fastener Head Width:
0.725 - 0.750 in.
Fastener Height:
0.302 - 0.364
Fastener Length:
1/3/04
Fastener Width:
0.826 - 0.866
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Grade:
2
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_St-Zn_Galv.pdf
Order Minimum Imperial:
50
Order Minimum Uom Imperial:
EA
Outside Diameter:
0.482 - 0.515 IN
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
5.85 lbs
Product Width:
3.5 in
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.2.1-1996
Department:
Electrical
Product Subgroup:
Bolts
Product Type:
Hexagonal Bolt
Type2:
Hexagonal Bolt
Series:
BHC and JBHC
Product Finish:
Zinc
Product Details:
Hexagonal Bolt
Product Material:
Steel

Metallics JBHC65 – Frequently Asked Questions

1) What thread and nut size does the Metallics JBHC65 hex bolt take?
The JBHC65 is a 1/2-13 hex bolt, so 13 threads per inch on a 1/2 inch diameter: standard UNC coarse thread. Any 1/2-13 UNC nut, coupling nut, or tapped 1/2 inch hole will take it. Threads are made to ASME B18.2.1-1996, so it interchanges with other coarse-thread 1/2 inch hex cap hardware.
2) Do these Metallics bolts qualify for a Buy American or ARRA funded project?
No. The JBHC65 hex bolts are not Buy American compliant and are not ARRA compliant, with multiple countries of origin. If your contract carries domestic sourcing requirements, these will not satisfy them.
3) What wrench or socket size fits these 1/2-13 hex bolts?
Head width across flats measures 0.725 to 0.750 inches on the Metallics hex bolt, which is a 3/4 inch wrench or socket. That is the standard hex size for a 1/2 inch cap screw.
4) Can zinc plated hex bolts be used outdoors or in a wet location?
Zinc plating on the Metallics JBHC65 gives moderate corrosion resistance, fine for damp interiors, mechanical rooms, and covered exterior work. For continuous weather exposure, a corrosive atmosphere, or any wet location where the fastener sits in standing water, step up to hot-dip galvanized or stainless instead; zinc plating is a thin sacrificial coating and will rust through over time in those conditions.
5) How many bolts come in a jar of Metallics JBHC65, and can I buy fewer?
They ship in a jar of 50 pieces, and 50 each is the order minimum, so the jar is the smallest unit. Other sizes and quantities are available by request if 1/2-13 x 1-3/4 is not the length you need.
6) What size hole do I need to drill for a 1/2-13 hex bolt to pass through?
Shank outside diameter on the JBHC65 runs 0.482 to 0.515 inches, so a 9/16 inch hole clears it comfortably for a bolted through-connection. A nominal 1/2 inch drilled hole is too tight to count on since the shank can measure up to 0.515. If you're threading into tapped material instead, the hole is tapped 1/2-13.
7) Are these hex cap screws or carriage bolts?
Hex head, not carriage. The JBHC65 has a hex head you drive with a wrench or socket, in zinc plated steel. If your application needs a smooth domed head with a square shoulder that pulls into wood, a carriage bolt is the right part instead.
8) How much does a jar of 50 Metallics hex bolts weigh for shipping?
A jar of the JBHC65 1/2-13 x 1-3/4 hex bolts comes in at 5.85 lbs. Useful if you're ordering several jars onto a van stock order or figuring freight on a bulk MRO buy.
How fast can I get the Metallics JBHC65 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBHC65 come with a warranty?
Absolutely. The Metallics JBHC65 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBHC65?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBHC65 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!