You may also like
Bolts 1/4-20 x 1-3/4 HXBT Br (Jar 100)
Additional Notes
- other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Color:
- Brass
- Fastener Head Height:
- May-32 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.428 - 0.438 in.
- Fastener Height:
- 0.150 - 0.163
- Fastener Length:
- 1/3/04
- Fastener Width:
- 0.488 - 0.505
- Language Code:
- EN
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.2450 - 0.2500 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 4.57 in
- Product Length:
- 3 in
- Product Weight:
- 1143 g
- Product Width:
- 76.2 MM
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 20
- Wrenching Height:
- 0.16
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- JBRHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- Brass
Metallics JBRHC50 – Frequently Asked Questions
1) Is the Metallics JBRHC50 hex bolt solid brass or just brass plated?
Solid brass. The JBRHC50 is a brass fastener with a brass head color, so there is no plating to wear through or chip at the wrench flats. That matters where you need the corrosion behavior and the non-magnetic, non-sparking character of brass rather than a coated steel bolt, and where the bolt stays visible after install.
2) What thread does the JBRHC50 brass hex bolt use, and will it thread into a 1/4-20 tapped hole?
It is a 1/4-20 thread, 20 threads per inch, so it threads straight into any 1/4-20 tapped hole or nut. The shank measures 0.2450 to 0.2500 inch outside diameter, which is standard 1/4 inch coarse. It will not work in a 1/4-28 fine-thread hole.
3) What size wrench or socket do I need for these 1/4-20 brass hex bolts?
The hex head measures 0.428 to 0.438 inch across the flats, which is a 7/16 inch wrench or socket. Use a six-point socket or a box wrench rather than an open-end adjustable; brass flats round off easily, and the wrenching height is only 0.16 inch, so a worn open-end tool has very little to grab.
4) How are Metallics JBRHC brass hex bolts packaged, and is there a minimum order?
They ship in a jar of 100 pieces, and the jar is the minimum order unit, 100 count. You are buying the full jar, not loose pieces, which suits a service truck or an MRO crib where you want a sealed container of one size rather than a bin of mixed fasteners. Total weight of the jar is 1143 g.
5) Can I get this Metallics brass hex bolt in a different length or a smaller quantity?
Other sizes and quantities of the JBRHC brass hex bolt are available by request. The JBRHC50 itself is the 1/4-20 x 1-3/4 version in a jar of 100, so if you need a shorter shank for thinner material or a larger bulk count for a standing job, ask for the alternate size rather than ordering this one and cutting it down.
6) Are brass hex bolts like the JBRHC50 suitable for electrical grounding and bonding work?
This is a brass fastener catalogued for electrical supply work, and brass is the usual choice for grounding and bonding hardware because it stays conductive and resists the galvanic problems you get pairing steel with copper bus or copper ground straps. It is a plain 1/4-20 hex bolt, so the mating nut, lug, or tapped hole has to be 1/4-20 as well.
7) Where are Metallics JBRHC50 brass hex bolts made?
Country of origin is China. Both the ARRA and Buy American compliance flags on the JBRHC50 record are marked C. If your project carries a domestic-sourcing requirement, have the origin documentation confirmed against your contract language before you spec the jar.
8) Do the JBRHC50 bolts come with nuts or washers?
No. The jar holds hex bolts only, 100 of them. Order 1/4-20 brass hex nuts and any flat or lock washers separately, and keep them in brass too if the reason you picked a brass bolt was conductivity or corrosion rather than appearance.
How fast can I get the Metallics JBRHC50 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBRHC50 come with a warranty?
Absolutely. The Metallics JBRHC50 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBRHC50?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBRHC50 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.