You may also like
Metallics JG5HTB51 Bolts 1/4-20 X 2-1/4 G5 Hx Tap Blt S (Jar 100)
Model: MET-JG5HTB51
Bolts 1/4-20 X 2-1/4 G5 Hx Tap Blt S (Jar 100)
Additional Notes
Other sizes and quantities available by request
Features
A cap screw made from medium carbon steel and heat-treated
Used to mount...
Metallics
$50.47
$0.47
Bolts 1/4-20 X 2 G5 Hx Tap Blt S (Jar 100)
Features
- Used to mount motor to machinery. Also popular in automotive and truck repair
- A cap screw made from medium carbon steel and heat-treated
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Country Of Origin:
- United States
- Division:
- Electrical H1
- Fastener Head Height:
- May-32 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.428 - 0.438 in.
- Fastener Height:
- 0.150 - 0.163
- Fastener Length:
- 2
- Fastener Width:
- 0.488 - 0.505
- Grade:
- 5
- Hardness:
- Rockwell C19-30
- Language Code:
- EN
- Material Standard:
- AISI 1008 - 1026
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.2450 - 0.2500 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 5.75 in
- Product Length:
- 3.5 in
- Product Weight:
- 1293 g
- Product Width:
- 88.9 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 105000 psi minimum
- Thread Direction:
- Right Hand
- Thread Per Inch:
- 20
- Thread Standard:
- ASME B18.2.1-2012
- Wrenching Height:
- 0.106
- Yield Strength:
- 105000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- G5HTB and JG5HTB
- Product Finish:
- Zinc
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics JG5HTB4D – Frequently Asked Questions
1) What thread and size is the Metallics JG5HTB4D hex tap bolt?
It is a 1/4-20 bolt: 1/4 inch nominal diameter with 20 threads per inch, right hand thread, 2 inches long. Measured shank outside diameter runs 0.2450 to 0.2500 inch. Threads conform to ASME B18.2.1-2012, so it mates with any standard 1/4-20 UNC nut or tapped hole.
2) How strong is a Grade 5 bolt compared to a plain hardware-store bolt?
Grade 5 means medium carbon steel that has been heat treated. This one lists 105,000 psi minimum tensile and 105,000 psi minimum yield, with hardness of Rockwell C19-30, made from AISI 1008-1026 steel. That is a structural-duty fastener, well above an unmarked low carbon Grade 2 bolt, and it is why it holds up under motor vibration and vehicle service loads.
3) Does this Metallics hex bolt meet Buy American and ARRA requirements for a government job?
Yes. The JG5HTB4D is flagged both ARRA compliant and Buy American compliant, with country of origin listed as the United States. That covers the domestic sourcing box on federally funded and public institutional work.
4) Is a hex tap bolt threaded all the way, and does that matter for mounting a motor?
A tap bolt is fully threaded to the head rather than having a plain shank, which is why this 1/4-20 x 2 inch Grade 5 is used for bolting motors to machinery and in automotive and truck repair. Full threading lets you run it into a tapped hole at whatever depth the casting gives you, instead of being limited by a fixed grip length.
5) Is this bolt plated, and will it hold up outdoors?
Zinc plated steel. Zinc gives ordinary indoor and sheltered corrosion protection and is standard for motor mounting, panel, and equipment work. For sustained wet or coastal exposure, a hot dip galvanized or stainless fastener is the better call, since zinc plating is a thin sacrificial coat.
6) How many bolts come in a jar of Metallics JG5HTB4D?
They ship 100 to a jar, and 100 count is the order minimum. The jar itself is a shop-friendly package for a bench or service truck. Metallics lists other sizes and quantities by request if 2 inch is not the length you need.
How fast can I get the Metallics JG5HTB4D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JG5HTB4D come with a warranty?
Absolutely. The Metallics JG5HTB4D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JG5HTB4D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JG5HTB4D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.