You may also like
Bolts 1/4-20 x 2 HXBT SS (Jar 50)
Features
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Height:
- May-32 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.428 - 0.438 in.
- Fastener Height:
- 0.150 - 0.163
- Fastener Length:
- 2
- Fastener Width:
- 0.488 - 0.505
- Hardness:
- Rockwell B95-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_Dom_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- EA
- Outside Diameter:
- 0.2450 - 0.2500 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 3.6 in
- Product Length:
- 3 in
- Product Weight:
- 735 g
- Product Width:
- 76.2 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 100000 - 150000 psi minimum
- Thread Per Inch:
- 20
- Yield Strength:
- 65000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 18-8 Stainless Steel
Metallics JSBH4L – Frequently Asked Questions
1) Are these bolts stainless steel, and will they hold up outdoors or in a washdown area?
Material is 18-8 austenitic stainless steel, which handles general atmospheric corrosion, so outdoor mounting, damp mechanical rooms, and food-processing or chemical equipment are all within its range. Aggressive chemical exposure is the exception; those environments may call for 316 stainless or another specialty alloy instead.
2) What wrench or socket size fits these 1/4-20 stainless hex bolts?
The hex head measures 0.428 to 0.438 inch across the flats, which is a 7/16 inch wrench or socket. Across the corners it runs 0.488 to 0.505 inch, worth knowing if you're working in a tight pocket or counterbore.
3) How strong is a 1/4-20 18-8 stainless hex bolt like the JSBH4L?
Tensile strength is 100,000 to 150,000 psi minimum with a 65,000 psi minimum yield, and hardness runs Rockwell B95 to C32. That's typical structural duty for 18-8 stainless. Note that stainless galls easily on assembly, so run it down with a lubricant or anti-seize if you're torquing into a stainless nut.
4) How many bolts come in a jar of Metallics JSBH4L?
Fifty pieces, packed in a jar rather than a loose box. Order minimum is 50 each, so the jar is the buying unit. Total packed weight is 735 g.
5) Do these Metallics hex bolts come with nuts and washers?
No. The jar contains the hex bolts only, 1/4-20 x 2 inch, 50 of them. Order 1/4-20 stainless hex nuts and flat or lock washers separately, and match them in 18-8 stainless so you don't set up a galvanic pair with the bolt.
6) Are Metallics JSBH4L bolts Buy American and ARRA compliant for a government job?
Both flags are marked compliant in the product record, which matters on federally funded work where domestic-preference language is in the spec. Country of origin is listed as multiple, so if your contract requires a single documented origin, request that confirmation on the specific lot.
7) What material thickness can a 2 inch long 1/4-20 bolt clamp through?
The 2 inch length is measured under the head, so your usable grip is 2 inches minus the nut and washer stack. Head height adds 0.150 to 0.163 inch above the surface. Practically that handles a strut-and-bracket sandwich, doubled unistrut, or a fixture base through sheathing. For thinner joints you want a shorter bolt so you aren't left with excess thread past the nut.
8) Can I get this Metallics hex bolt in a different length or diameter?
Yes. The SBHC and JSBHC hex bolt series runs other sizes and pack quantities on request; JSBH4L is the 1/4-20 x 2 inch jar of 50. Tell us the diameter, thread, length, and how many you need and it can be quoted from the same 18-8 stainless family.
How fast can I get the Metallics JSBH4L delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSBH4L come with a warranty?
Absolutely. The Metallics JSBH4L is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSBH4L?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSBH4L from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.