Metallics JG5HCF4 Bolts 1/4-28...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$51.67
$1.93
Metallics JG5HCF4 Bolts 1/4-28 x 2 G5 HXBT St-zn (Jar 100)

Metallics JG5HCF4 Bolts 1/4-28 x 2 G5 HXBT St-zn (Jar 100)

(No reviews yet) Write a Review

Model: JG5HCF4
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$51.67
$1.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Bolts 1/4-28 x 2 G5 HXBT St-zn (Jar 100)

  • Additional Notes

    • Other sizes and quantities available by request

  • Features

    • A cap screw made from medium carbon steel and heat-treated
    • Used to mount motor to machinery. Also popular in automotive and truck repair

Manufacturer Resources

Product Specs

Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Fastener Head Height:
May-32 in.
Fastener Head Type:
Hex
Fastener Head Width:
0.428 - 0.438 in.
Fastener Height:
0.150 - 0.163
Fastener Length:
2
Fastener Width:
0.488 - 0.505
Grade:
5
Hardness:
Rockwell C19-30
Language Code:
EN
Material Standard:
AISI 1008 - 1026
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Gr_5_Hex_Bolt_Dom_St-Zn.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Outside Diameter:
0.2450 - 0.2500 IN
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1393 g
Product Width:
76.2 MM
Sub Division:
Electrical-E H2
Tensile Strength:
105000 psi minimum
Thread Per Inch:
28
Thread Standard:
ASME B18.2.1-2012
Voltage Rating:
Zinc Chromate
Wrenching Height:
0.106
Yield Strength:
105000 psi minimum
Department:
Electrical
Product Subgroup:
Bolts
Product Type:
Hexagonal Bolt
Type2:
Hexagonal Bolt
Series:
G5HC and JG5HC
Product Finish:
Zinc
Product Details:
Hexagonal Bolt
Product Material:
Steel

Metallics JG5HCF4 – Frequently Asked Questions

1) Is the Metallics JG5HCF4 bolt a fine thread or coarse thread 1/4 inch bolt?
Fine thread. The JG5HCF4 is a 1/4-28 bolt, 28 threads per inch, which is UNF rather than the more common 1/4-20 coarse (UNC) thread. A 1/4-20 nut or tapped hole will not accept it, so match the tapped hole or nut to 28 TPI before ordering. Thread conforms to ASME B18.2.1-2012.
2) What grade and strength is this 1/4-28 x 2 hex bolt rated for?
It is a Grade 5 hex cap screw: medium carbon steel, heat treated, with 105,000 psi minimum tensile and 105,000 psi minimum yield, and hardness of Rockwell C19-30. Steel is to AISI 1008-1026. That puts it well above a plain Grade 2 fastener for motor mounting and machinery work, but below a Grade 8 if your drawing calls one out.
3) What wrench or socket size fits the head on the Metallics JG5HCF4?
Head width across flats measures 0.428 to 0.438 inch, so a 7/16 inch wrench or socket is the fit. Corner-to-corner width runs 0.488 to 0.505 inch. The head is a standard hex.
4) How many bolts come in a jar of Metallics JG5HCF4, and can I buy fewer?
They ship as a jar of 100, and 100 count is the order minimum, so a jar is the smallest buy. Full jar weight is 1393 g. Metallics notes other sizes and quantities are available by request.
5) Will a zinc plated Grade 5 bolt hold up outdoors or in a damp mechanical room?
The JG5HCF4 carries a zinc plated finish over steel, which handles indoor and sheltered mechanical room conditions and incidental moisture. For continuous wet, coastal, or washdown exposure, zinc plating on carbon steel is not a long-term corrosion answer; specify stainless or hot dip galvanized for those openings instead.
6) Is the Metallics JG5HCF4 bolt Buy American and ARRA compliant for a government job?
It is flagged compliant for both Buy American and ARRA. Country of origin is listed as multiple, so if your submittal requires a single named country of manufacture, request the cert for the lot you are being shipped.
7) What is this 1/4-28 x 2 inch Grade 5 hex bolt typically used for?
It is a hex cap screw commonly used to mount motors to machinery, and it sees heavy use in automotive and truck repair where fine thread fasteners are the norm. The 2 inch length is measured under the head, with a shank diameter of 0.2450 to 0.2500 inch, so figure your grip plus enough thread engagement into the tapped hole or nut.
8) How much head height does the JG5HCF4 add above the mounted surface?
Head height runs 0.150 to 0.163 inch, with 0.106 inch of wrenching height on the flats. That matters when the bolt sits in a recessed pocket or under a guard, there has to be enough clear depth for a socket to engage the 0.106 inch wrenching surface.
How fast can I get the Metallics JG5HCF4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JG5HCF4 come with a warranty?
Absolutely. The Metallics JG5HCF4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JG5HCF4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JG5HCF4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!