You may also like
Bolts 3/4-10 x 1-1/2 HXBT Pln-St (Box 100)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Height:
- 2-Jan in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 1.088 - 1.125 in.
- Fastener Height:
- 0.455 - 0.524
- Fastener Length:
- 1/1/02
- Fastener Width:
- 1.240 - 1.299
- Language Code:
- EN
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.729 - 0.768 IN
- Pack Type:
- Box
- Product Group:
- Fasteners
- Product Height:
- 6.13 in
- Product Length:
- 9 in
- Product Weight:
- 28.72 lbs
- Product Width:
- 9 in
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 10
- Thread Standard:
- ASME B18.2.1-1996
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- BHC and JBHC
- Product Finish:
- Plain
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics BHC7612PL – Frequently Asked Questions
1) Will a 3/4-10 x 1-1/2 hex bolt thread into a standard coarse 3/4 inch nut or tapped hole?
Yes. The BHC7612PL is cut 10 threads per inch, which is the UNC coarse pitch for 3/4 inch diameter, and the thread is made to ASME B18.2.1-1996. Measured major diameter runs 0.729 to 0.768 inch, so it drops into any standard 3/4-10 nut, coupling, or tapped channel insert.
2) Is a plain finish steel bolt okay for outdoor or damp electrical work?
No, not without protection. These are steel with a plain (unplated, uncoated) finish, so there is no corrosion barrier at all. Keep them to dry indoor work such as strut and channel assembly, panel and enclosure mounting, or equipment bases inside a building. For rooftop, exterior, wash-down, or wet locations, order a hot dip galvanized or stainless 3/4-10 hex bolt instead.
3) What size wrench or socket do I need for a Metallics BHC7612PL 3/4-10 hex bolt?
Across the flats the hex head measures 1.088 to 1.125 inches, so a 1-1/8 inch wrench or socket is the right fit. That is the standard across-flats size for a 3/4 inch hex bolt, so an impact socket out of a standard SAE set will drive these.
4) Do I have to buy a full box of 100 of the Metallics BHC7612PL, or can I get a smaller count?
It ships as a box of 100, and 100 count is the order minimum, so that is the smallest quantity on this model. Metallics does offer other sizes and quantities in the BHC and JBHC bolt series by request if 100 pieces of this length is more than a job needs.
5) What grip length does a 1-1/2 inch long hex bolt actually give me on a bolted connection?
The BHC7612PL is a 3/4-10 hex bolt with a 1-1/2 inch shank measured under the head, so once you allow for a nut and washers you are clamping roughly an inch or less of material. It suits single-thickness steel, strut, and bracket connections. For stacked plates, spacer blocks, or anything thicker, step up to a longer 3/4-10 bolt in the same series rather than running short on thread engagement.
6) How much does a box of 100 Metallics 3/4-10 x 1-1/2 hex bolts weigh?
The packed box comes in at 28.72 lbs, which is worth knowing if you are staging material on a lift or carrying it up to a mechanical room. One box is a one-hand carry for most people but not a comfortable ladder load.
7) I need country of origin for a government submittal on these Metallics bolts. Where are they made?
Country of origin on the BHC7612PL is China. The thread conforms to ASME B18.2.1-1996, which is the dimensional standard usually called out on submittals for square and hex bolts.
How fast can I get the Metallics BHC7612PL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics BHC7612PL come with a warranty?
Absolutely. The Metallics BHC7612PL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics BHC7612PL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics BHC7612PL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.