You may also like
Bolts 3/4-10 x 2-1/2 HXBT Pln-St (Box 100)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Height:
- 2-Jan in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 1.088 - 1.125 in.
- Fastener Height:
- 0.455 - 0.524
- Fastener Length:
- 2/1/02
- Fastener Width:
- 1.240 - 1.299
- Language Code:
- EN
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.729 - 0.768 IN
- Pack Type:
- Box
- Product Group:
- Fasteners
- Product Height:
- 10.75 in
- Product Length:
- 11.5 in
- Product Weight:
- 39.8 lbs
- Product Width:
- 11.5 in
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 10
- Thread Standard:
- ASME B18.2.1-1996
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- BHC and JBHC
- Product Finish:
- Plain
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics BHC79PL – Frequently Asked Questions
1) What thread does the Metallics BHC79PL hex bolt take, and will it run into a standard 3/4-10 nut?
It's a 3/4-10 hex bolt, 10 threads per inch on a 3/4 inch nominal diameter, cut to ASME B18.2.1-1996. That is the standard UNC coarse pitch for 3/4 inch, so it mates with any 3/4-10 coarse nut or tapped hole. Measured thread major diameter runs 0.729 to 0.768 in.
2) Is the Metallics BHC79PL bolt galvanized or will it rust outdoors?
Plain finish steel, with no plating or galvanizing. These are for dry interior work, indoor equipment mounting, panel and gear anchoring. For exterior, damp, or corrosive locations, specify a hot-dip galvanized or zinc-plated 3/4-10 x 2-1/2 hex bolt instead; a plain bolt will start surface rusting.
3) What size wrench or socket fits the BHC79PL bolt head?
Across-flats width on the hex head measures 1.088 to 1.125 in., so a 1-1/8 inch wrench or socket is the one you want. Corner-to-corner the head runs 1.240 to 1.299 in., which matters if you're working in a tight pocket or against a flange.
4) Can I buy these 3/4-10 hex bolts individually, or only by the box?
They ship as a box of 100 and the order minimum is 100 count, so the box is the buying unit. Metallics does note that other sizes and quantities are available by request if 100 of this length is more than the job needs.
5) Do nuts and washers come with the BHC79PL hex bolts?
No. The box contains 100 hex bolts only. Order 3/4-10 hex nuts and 3/4 inch flat or lock washers separately to complete the assembly.
6) Where are the Metallics BHC79PL bolts made?
Country of origin on the BHC79PL is China. If your project has a domestic-content clause in the specification, confirm the requirement against the documentation before you commit the fastener package.
How fast can I get the Metallics BHC79PL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics BHC79PL come with a warranty?
Absolutely. The Metallics BHC79PL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics BHC79PL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics BHC79PL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.