You may also like
Bolts 3/4-10 X 3 Hxbt SS (Box 20)
Features
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Fastener Head Height:
- 15/32 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 1.100 - 1.125 in.
- Fastener Height:
- 0.455 - 0.483
- Fastener Length:
- 3
- Fastener Width:
- 1.254 - 1.299
- Hardness:
- Rockwell B80-C32
- Language Code:
- EN
- Order Minimum Imperial:
- 20
- Order Minimum Uom Imperial:
- EA
- Outside Diameter:
- 0.7410 - 0.7500 IN
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 85000 - 140000 psi minimum
- Thread Per Inch:
- 10
- Wrenching Height:
- 0.324
- Yield Strength:
- 45000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 18-8 Stainless Steel
Metallics SBH982 – Frequently Asked Questions
1) Is the Metallics SBH982 bolt coarse or fine thread, and what nuts will it take?
It's 3/4-10, meaning 10 threads per inch, which is the standard coarse (UNC) pitch for 3/4 inch diameter. Any 3/4-10 UNC nut or tapped hole will take it. Shank outside diameter runs 0.7410 to 0.7500 inch.
2) Will 18-8 stainless bolts hold up outdoors or in a wash-down area?
18-8 is an austenitic stainless that handles general atmospheric corrosion, which covers most exterior structural, chemical and food-processing work. Where you have chloride exposure such as coastal salt air, pool chemistry or de-icing salts, 316 stainless is the better call. Metallics builds both grades in this cap screw family.
3) Can I use a stainless 3/4-10 bolt where a Grade 5 or Grade 8 bolt is specified?
No, not as a direct swap. The SBH982 is rated 85,000 to 140,000 psi minimum tensile with 45,000 psi minimum yield, and hardness runs Rockwell B80 to C32. A Grade 5 or Grade 8 structural bolt is a higher-strength carbon steel fastener, so if the engineer called one out, stainless is a substitution the engineer has to approve. Stainless is chosen here for corrosion resistance, not strength.
4) Does the Metallics SBH982 bolt meet Buy American or ARRA requirements for a public project?
No. The SBH982 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your federal, state or municipal contract carries a domestic-sourcing clause, this bolt will not satisfy it.
5) What size wrench or socket do I need for the Metallics SBH982 3/4-10 hex bolt?
The hex head on the SBH982 measures 1.100 to 1.125 inches across the flats, so a 1-1/8 inch wrench or socket is the fit. Head height is 15/32 inch, which matters if you are working in a counterbored or recessed pocket.
6) How much grip length do I get from a 3 inch long 3/4-10 stainless hex bolt?
The SBH982 has a 3 inch shank length measured under the head, so your total clamped material plus washers and nut has to fit inside that. The 15/32 inch head sits above the surface and is not part of the 3 inch.
7) How many bolts come in a box of Metallics SBH982, and can I buy just a few?
They ship as a box of 20, and 20 each is the order minimum. If you need a different length or a different count in this 3/4-10 stainless hex cap screw family, other sizes and quantities are available by request.
8) What hole size should I drill for a 3/4-10 hex bolt like the SBH982?
Shank diameter on the SBH982 measures 0.7410 to 0.7500 inch, so a 13/16 inch clearance hole is the normal drill for a through-bolted connection and gives you a little play for alignment. A tight 3/4 inch hole leaves no tolerance for the upper end of that diameter range.
How fast can I get the Metallics SBH982 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SBH982 come with a warranty?
Absolutely. The Metallics SBH982 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SBH982?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SBH982 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.