You may also like
Bolts 3/4-10 X 3-3/4 Hxbt SS (Box 50)
Features
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Height:
- 15/32 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 1.100 - 1.125 in.
- Fastener Height:
- 0.455 - 0.483
- Fastener Length:
- 3/3/04
- Fastener Width:
- 1.254 - 1.299
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell B80-C32
- Language Code:
- EN
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.7410 - 0.7500 IN
- Pack Type:
- Box
- Product Group:
- Fasteners
- Product Height:
- 6 in
- Product Length:
- 7.25 in
- Product Width:
- 158.75 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 85000 - 140000 psi minimum
- Thread Per Inch:
- 10
- Wrenching Height:
- 0.324
- Yield Strength:
- 45000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 18-8 Stainless Steel
Metallics SBH60 – Frequently Asked Questions
1) What thread does the Metallics SBH60 hex bolt take, and will a standard 3/4-10 nut fit it?
The SBH60 is a 3/4 inch diameter hex bolt with 10 threads per inch, which is standard UNC coarse thread for that diameter. Any 3/4-10 nut or tapped 3/4-10 hole will thread onto it. Measured outside diameter runs 0.7410 to 0.7500 inch, so it drops through a nominal 13/16 inch clearance hole.
2) Is the SBH60 bolt stainless, and will it hold up outdoors or in a wash-down area?
It's 18-8 stainless steel, an austenitic alloy used where general atmospheric corrosion resistance is needed, including chemical and food-processing equipment. That covers outdoor and wash-down service. Aggressive chemical exposure or chloride-heavy environments can call for 316 stainless or other special corrosion resistant material instead.
3) How strong is a 3/4-10 18-8 stainless hex bolt like the Metallics SBH60?
Tensile strength is 85,000 to 140,000 psi minimum with a yield of 45,000 psi minimum, and hardness runs Rockwell B80 to C32. That is typical stainless cap screw territory, lower in yield than a hardened carbon steel Grade 5 or Grade 8 bolt. If your drawing calls out a graded carbon steel fastener for a structural connection, this stainless bolt is not a drop-in substitute; spec it where corrosion resistance is the driver.
4) How does the Metallics SBH60 bolt come packaged, and is there a minimum order?
It ships as a box of 50, and 50 count is the order minimum, so it is bought by the box rather than the piece. Fine for a repeat MRO stocking item; if you need a different size or a smaller count, Metallics notes other sizes and quantities are available by request.
5) Does the SBH60 stainless bolt qualify for a Buy American or ARRA-funded project?
Metallics flags the SBH60 as both Buy American compliant and ARRA compliant. Country of origin is listed as multiple, which is common on fastener lines with more than one mill source, so for a federally funded job ask for the mill certification on the specific lot you receive.
6) Does the SBH60 come with nuts or washers?
No. The SBH60 is the hex bolt only, 50 to a box. You'll need to order 3/4-10 nuts and any flat or lock washers separately, and in 18-8 stainless to match, since mixing carbon steel nuts onto a stainless bolt in a wet location sets up galvanic corrosion at the joint.
7) What is the SBH60 hex bolt typically used for on the job?
Metallics lists it for the electrical, plumbing, heating and air conditioning trades. In practice that is strut and channel framing, equipment and pump mounting, hanger and bracket connections, and anywhere a 3/4 inch stainless through-bolt is needed. The 3-3/4 inch length suits stacked members or a bracket plus beam flange where total grip plus nut needs the extra reach.
How fast can I get the Metallics SBH60 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SBH60 come with a warranty?
Absolutely. The Metallics SBH60 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SBH60?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SBH60 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.