You may also like
Bolts 3/8 X 1-1/4 Hx Lag Blt Galv (Jar 100)
Additional Notes
- Other sizes and quantities available by request
Features
- A full-bodied boltwith hex head, spaced threads and a gimlet point
- For use in corrosive enviroments
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Dimensional Standard:
- ASME B18.2.1-1996
- Division:
- Electrical H1
- Fastener Head Height:
- 4-Jan in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.544 - 0.562 in.
- Fastener Height:
- 0.226 - 0.268
- Fastener Length:
- 1/1/04
- Fastener Width:
- 0.620 - 0.650
- Hardness:
- Rockwell B70-B100
- Language Code:
- EN
- Material Standard:
- AISI 1006 - 1022
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Lag_Bolt_St-Zn_18-8_SS_Galv.pdf
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.360 - 0.388 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 5.75 in
- Product Length:
- 3.5 in
- Product Weight:
- 1833 g
- Product Width:
- 88.9 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 60000 psi minimum
- Thread Per Inch:
- 7
- Washer Od:
- 0.125 in.
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- BLS and JBLS
- Product Finish:
- Galvanized
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics JBLS46G – Frequently Asked Questions
1) Is the Metallics JBLS46G lag bolt OK for outdoor or damp locations?
Yes. The JBLS46G is a galvanized steel lag bolt, and Metallics calls it out for use in corrosive environments. That covers exterior strut and hanger anchoring, damp mechanical rooms, and treated-lumber framing where plain zinc would rust out. Body and threads are steel to AISI 1006 to 1022.
2) What strength are these lag bolts rated at?
Minimum tensile strength is 60,000 psi with hardness of Rockwell B70 to B100, which is the low-carbon commercial grade range for lag screws. Fine for electrical and mechanical attachment to wood. If a drawing calls for a Grade 5 or Grade 8 fastener, this is not it.
3) Do these Metallics lag bolts meet a dimensional spec I can cite on a submittal?
Yes. Head and body dimensions conform to ASME B18.2.1-1996, and the steel is to AISI 1006 to 1022. Those two plus the 60,000 psi minimum tensile are what a submittal reviewer usually wants on a lag screw.
4) Can I use the JBLS46G on a federally funded job with Buy American requirements?
Metallics flags the JBLS46G as ARRA compliant and Buy American compliant, with country of origin China. Compliance programs differ by funding source, so match those flags against the specific clause in your contract before you commit a quantity.
5) Should I use a lag bolt or a through bolt for mounting electrical equipment to framing?
A lag like the JBLS46G threads directly into wood, so you only need access from one side, which is why it is the common pick for mounting boxes, straps and channel to studs, joists or blocking. If you can reach both faces and the load is heavy or cycling, a through bolt with nut and washer is the better connection. Also go through-bolt for steel or masonry: a galvanized wood lag with a gimlet point is for wood.
6) How are these lag bolts packaged and what is the smallest quantity I can buy?
They ship in a jar of 100, and 100 count is the order minimum. The jar is the handy format for a service van or a shop bin rather than a bulk carton. Total pack weight is 1833 g.
How fast can I get the Metallics JBLS46G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBLS46G come with a warranty?
Absolutely. The Metallics JBLS46G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBLS46G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBLS46G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.