You may also like
Bolts 5/8-11 X 1-1/4 Hxbt SS (Jar 25)
Additional Notes
- Other sizes and quantities available by request
Features
- The molybdenumcontent gives this type of stainless even greater corrosion resistance than 18-8 as well as superior strength at high temperatures.
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Fastener Head Height:
- 25/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.922 - 0.938 in.
- Fastener Height:
- 0.378 - 0.403
- Fastener Length:
- 1/1/04
- Fastener Width:
- 1.051 - 1.083
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell B95-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_Dom_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- JR
- Outside Diameter:
- 0.6170 - 0.6250 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 7.25 in
- Product Length:
- 4.5 in
- Product Weight:
- 3044 g
- Product Width:
- 114.3 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 100000 - 150000 psi minimum
- Thread Per Inch:
- 11
- Yield Strength:
- 65000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 316 Stainless Steel
Metallics JSBH671 – Frequently Asked Questions
1) Is the Metallics JSBH671 hex bolt 316 stainless or 18-8?
316 stainless steel. The molybdenum in 316 gives it more corrosion resistance than 18-8 and better strength at elevated temperature, which is why it gets picked for coastal, wastewater, pool chemical, and roof-mounted equipment work where 18-8 pits. Both alloys are austenitic, so neither is magnetic in the usual sense and neither is heat treatable.
2) Is this bolt strong enough for structural or equipment mounting?
Tensile strength is rated 100,000 to 150,000 psi minimum with a yield of 65,000 psi minimum, and hardness runs Rockwell B95 to C32. That is typical 316 stainless fastener territory: plenty for hanging electrical, plumbing, and HVAC equipment, but it is not a graded carbon steel structural bolt. If a drawing calls out a specific SAE or ASTM structural grade, this is not a substitute for it.
3) Can I use these on a federally funded job with Buy American requirements?
No. The JSBH671 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. For a job with domestic sourcing language in the spec, you will need a domestically produced 5/8-11 stainless bolt instead.
4) What size wrench or socket fits the head on this 5/8-11 stainless hex bolt?
Head width across flats measures 0.922 to 0.938 inch, which is a 15/16 inch wrench or socket. Head height is 25/64 inch, so allow for that when you are figuring clearance in a tight strut channel or behind equipment.
5) How much clamping thickness will a 1-1/4 inch long 5/8 bolt actually give me?
At 1-1/4 inches under the head, the JSBH671 is a short bolt meant for thin stack-ups, typically strut, channel, brackets, or flange-to-flange joints where total grip plus nut and washer stays under the length. If you are through-bolting anything thicker than about an inch of material, order a longer 5/8-11 in the same family instead; other sizes are available by request.
6) How are these Metallics hex bolts packaged and what is the minimum order?
They ship in a jar of 25. The jar packaging is the point for a service van or a shop bin, it keeps a single size sorted rather than loose in a tray. Ordering is by the jar, with a minimum of 100.
7) What trades is this stainless hex bolt intended for?
Metallics builds this line for the electrical, plumbing, heating and air conditioning trades. In practice that means strut and channel mounting, hanger and bracket attachment, transformer and panel anchoring hardware, and anywhere a contractor needs a corrosion resistant bolt on outdoor or wet-location equipment.
How fast can I get the Metallics JSBH671 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSBH671 come with a warranty?
Absolutely. The Metallics JSBH671 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSBH671?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSBH671 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.